Effects of Wet and Dry Treatments on Surface Functional Groups and Mechanical Properties of Flax Fiber Composites

Flax fibers have found widespread use in eco-composite materials because of their remarkable mechanical properties compared to glass fibers. However, their low stability limits their use on a larger scale when employed in hot or humid environments. Therefore, the surfaces should be modified before the composite process to provide the best interfacial interactions and increase the dispersion of natural fibers. To tackle this problem, two kinds of modifications can be considered: wet and dry modifications. This research explores different methods to improve the adhesion between flax fibers and the poly lactic acid (PLA) polymer. Morphological and chemical modifications in the presence of acetone, alkali (as a wet modification), and with air atmospheric pressure plasma (as a dry modification) are compared in this research. The results revealed that altering the chemical characteristics on the surface significantly changed the mechanical properties of the final composite. More specifically, the Fourier transform infrared spectroscopy (FTIR) data indicate that wax-related peaks (2850 and 2920 cm−1) were eliminated by both wet and dry treatments. Dynamic mechanical analysis (DMA) results also highlighted that a better bond between the flax fibers and the PLA matrix is obtained with the plasma modification.