Effects of Y2O3 Content on Wear Resistance and Corrosion Resistance of 316L/TiC Coating Fabricated by Laser Cladding
Source abstract
Abstract
Laser cladding technology is a surface modification technology emerging in recent years, and it is widely used in the marine engineering field. Since the structural steels used in marine engineering are mostly carbon steels, their wear resistance and corrosion resistance are poor. In this paper, 316 L stainless steel/TiC composite coatings with different Y2O3 addition amounts were fabricated on Q355B steel surface using the laser cladding technology, and the phase composition, microstructure, microhardness, wear resistance, and corrosion resistance of the coatings were investigated with an X-ray diffractometer (XRD), a scanning electron microscope (SEM), a digital microhardness tester, a friction and wear tester, and an electrochemical workstation. When Y2O3 is added, the crystals in the bottom part of the coating are basically broken and the organisation becomes more dense. When the Y2O3 addition amount is 2%, the hardness is highest, the frictional coefficient curve of the coating exhibits a stable descending trend, and the coating mass loss is the lowest. When Y2O3 is added at 1%, the dynamic potential polarisation curve shows high corrosion potential and low corrosion current density and exhibited the best performance in EIS. The added Y2O3 evidently improves the wear resistance and corrosion resistance of 316 L stainless steel/TiC composite coatings, and this provides a new possibility that a composite coating modified with rare earth oxide is used for repair of marine engineering structures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Naval Architecture and Shipping College, Guangdong Ocean University, Zhanjiang 524088, China
School of Electronics and Information Engineering, Guangdong Ocean University, Zhanjiang 524088, China
School of Materials and Engineering, Guangdong Ocean University, Zhanjiang 524088, China
Funding
National Natural Science Foundation of China · Special Project for Key Fields of Higher Education in Guangdong Province · Guangdong Provincial Key Laboratory of South China Sea Marine Ranch Intelligent Equipment
References (34)
Show source-provided references
1. Evaluation and Regional Differences Analysis of the Marine Industry Development Level: The Case of China10.1016/j.marpol.2022.105445 ↗
2. Mechanical Properties and Creep Strain of Q355 Cold-Formed Steel at Elevated Temperature10.1016/j.jcsr.2021.106577 ↗
3. Fabrication, Microstructures and Mechanical Properties of ZrO 2 Dispersion-Strengthened Q345 Steel10.1016/S1003-6326(18)64750-8 ↗
4. Investigation of Nanocrystallization Behaviour of AISI 316 Stainless Steel under Adiabatic and Non-Adiabatic Severe Plastic Deformation Conditions10.1016/j.matpr.2021.01.411 ↗
5. Effect of Input Parameters on Weld Bead Geometry and Weld Dilution for Weld Surfacing of Flux Cored 308L Stainless Steel on Low Carbon Steel10.1016/j.matpr.2022.04.412 ↗
6. Investigation of HVOF Thermal Sprayed Cr3C2-NiCr Cermet Carbide Coatings on Erosive Performance of AISI 316 Molybdenum Steel10.1016/j.mspro.2014.07.308 ↗
7. Oxidation Characterization of FeAl Coated 316 Stainless Steel Interconnects by High-Energy Micro-Arc Alloying Technique for SOFC10.1016/j.matlet.2011.06.032 ↗
8. Numerical and Experimental Investigation on Laser Metal Deposition as Repair Technology for 316L Stainless Steel10.1016/j.optlastec.2019.05.011 ↗
9. Analysis and Prediction of Cu-Sn-Ti Alloy Deposited on 316 L Steel by Coaxial Laser Cladding10.1016/j.ijleo.2023.170839 ↗
10. Effect of Fe and Ni Contents on Microstructure and Wear Resistance of Aluminum Bronze Coatings on 316 Stainless Steel by Laser Cladding10.1016/j.surfcoat.2018.02.032 ↗
11. Effect of Electrostatic Field on Microstructure and Mechanical Properties of the 316L Stainless Steel Modified Layer Fabricated by Laser Cladding10.1016/j.matchar.2022.112123 ↗
12. Annealing Effect on Wear Resistance of Nanostructured 316L Stainless Steel Subjected to Dynamic Plastic Deformation10.1016/S1005-0302(12)60145-5 ↗
13. Microstructure Instability in TiC-316L Stainless Steel Cermets10.1016/j.ijrmhm.2016.03.012 ↗
14. Thermal Desorption Spectroscopy Study of the Interaction of Hydrogen with TiC Precipitates10.1007/s12540-013-4013-7 ↗
15. TiC Ceramic Coating Reinforced 304 Stainless Steel Components Fabricated by WAAM-LC Integrated Hybrid Manufacturing10.1016/j.surfcoat.2023.129635 ↗
16. Laser-Clad FeCrAl/TiC Composite Coating on Ferrite/Martensitic Steel: Significant Grain Refinement and Wear Resistance Enhancement Induced by Adding TiC10.1016/j.surfcoat.2023.129272 ↗
17. Process Optimization, Microstructure and Microhardness of Coaxial Laser Cladding TiC Reinforced Ni-Based Composite Coatings10.1016/j.optlastec.2022.108129 ↗
18. Effects of TiC Mass Fraction on Microstructure, Corrosive–Wear and Electrochemical Properties of Laser Cladded CoCrFeNiMo High–Entropy Alloy Coatings10.1016/j.triboint.2023.108640 ↗
19. Influence of Y2O3 Addition on the Microstructure of TiC Reinforced Ti-Based Composite Coating Prepared by Laser Cladding10.1016/j.matchar.2022.111962 ↗
20. Microstructure and Properties of Mo-Si-B-Y2O3 Composite Coating on Nickel-Based Alloy by Laser Cladding10.1016/j.optlastec.2023.109473 ↗
21. Microstructure Evolution and Density Behavior of CP Ti Parts Elaborated by Self-Developed Vacuum Selective Laser Melting System10.1016/j.apsusc.2013.04.090 ↗
22. Ding, Y., Bi, W., Zhong, C., Wu, T., and Gui, W. (2022). A Comparative Study on Microstructure and Properties of Ultra-High-Speed Laser Cladding and Traditional Laser Cladding of Inconel625 Coatings. Materials, 15.10.3390/ma15186400 ↗
23. Effects of Y2O3 Addition on the Microstructure and Wear-Resistant Performance of TiN/TiB-Reinforced Ti-Based Laser-Clad Coatings on Ti-6Al-4V Alloys10.1016/j.mtcomm.2021.102752 ↗
24. Effects of CeO2 on the Microstructure and Properties of Laser Cladding 316L Coating10.1007/s11665-019-04221-w ↗
25. Microstructure and Element Distribution Characteristics of Y2O3 Modulated WC Reinforced Coating on Invar Alloys by Laser Cladding10.1016/j.optlastec.2022.108205 ↗
26. Xu, Z., Wang, Z., Chen, J., Qiao, Y., Zhang, J., and Huang, Y. (2019). Effect of Rare Earth Oxides on Microstructure and Corrosion Behavior of Laser-Cladding Coating on 316L Stainless Steel. Coatings, 9.10.3390/coatings9100636 ↗
27. Microstructure Growth Behavior and Its Evolution Mechanism during Laser Additive Manufacture of In-Situ Reinforced (TiB+TiC)/Ti Composite10.1016/j.jallcom.2017.09.033 ↗
28. Sliding Wear of Nanocrystalline Ni–W: Structural Evolution and the Apparent Breakdown of Archard Scaling10.1016/j.actamat.2010.04.005 ↗
29. Characterization of Weld Seam Surface and Corrosion Behavior of Laser-Beam-Welded AISI 2205 Duplex Stainless Steel in Simulated Body Fluid10.1007/s10853-020-05326-7 ↗
30. An Investigation of the Surface Characterization of Laser Surface Remelted and Laser Beam Welded AISI 316L Stainless Steel10.1016/S1452-3981(23)17418-9 ↗
31. Effect of Cl− on the Properties of the Passive Films Formed on 316L Stainless Steel in Acidic Solution10.1016/j.jmst.2013.07.010 ↗
32. Electrochemical Behavior of Low Phosphorus Electroless Ni–P–Si3N4 Composite Coatings10.1016/j.matchemphys.2009.11.047 ↗
33. Effects of CeO2 on Microstructure and Corrosion Resistance of TiC-VC Reinforced Fe-Based Laser Cladding Layers10.1016/S1002-0721(14)60188-5 ↗
34. Heat Treatment Effects on EN-PTFE-SiC Composite Coatings10.1016/j.surfcoat.2004.10.045 ↗