Research on Cleaning Mechanism of Anti-Erosion Coating Based on Thermal and Force Effects of Laser Shock
Source abstract
Abstract
TiN coating plays a positive role in improving the abrasion resistance and impact resistance of aero-engines in sand and dust environments. However, little research has been done on the laser cleaning of TiN coatings that failed on aircraft engines. In this paper, TiN coatings are deposited on Ti6Al4V alloys by magnetic filtered cathodic vacuum arc (MFCVA). The TiN coating was laser cleaned with different parameters. By analyzing coating morphology, surface composition and sample profile, the research reveals the morphological change of the TiN coating after cleaning and the laser cleaning mechanism. The results show that for TiN–Ti6Al4V structure, when the laser average power density is 2.54 × 103 W/cm2, the cleaning mechanism of the coating is thermal expansion; The laser average power density is increased to 5.08 × 103 W/cm2, the cleaning mechanism is thermal expansion, accompanied by the thermal melting of the substrate, a small amount of molten substrate overflows from the crack. When the laser average power density is 5.08 × 103 W/cm2 and the number of cleanings doubles, the cleaning direction is perpendicular to each other, the cleaning mechanism is thermal expansion and thermal melting, both the substrate and the coating are melted, and the cleaning is obviously effective.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Laser-induced spectroscopy and plasma · Diamond and Carbon-based Materials Research · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Science and Technology on Plasma Dynamics Laboratory, Air Force Engineering University, Xi’an 710038, China
State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an 710049, China
State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an 710049, China
References (36)
Show source-provided references
1. Chen, J., Geng, M., Li, Y., Yang, Z., Chai, Y., and He, G. (2019). Erosion Resistance and Damage Mechanism of TiN/ZrN Nanoscale Multilayer Coating. Coatings, 9.10.3390/coatings9020064 ↗
2. Effect of spraying distance on erosion resistance of plasma sprayed WC-12Co coating
3. Damage evolution and mechanism of TiN/Ti multilayer coatings in sand erosion condition10.1016/j.surfcoat.2018.08.062 ↗
4. Erosive and sliding wear of polybenzimidazole at elevated temperatures10.1007/s10853-015-9381-6 ↗
5. Review of key issues on coating against sand erosion of aero-engine compressor blade
6. Wear of PVD Ti/TiN multilayer coatings10.1016/S0257-8972(96)03141-6 ↗
7. The influence of ductile interlayer material on the particle erosion resistance of multilayered TiN based coatings10.1016/j.wear.2011.06.004 ↗
8. Nanolayered CrAlTiN and Multilayered CrAlTiN-AlTiN Coatings for Solid Particle Erosion Protection10.1016/j.triboint.2014.11.002 ↗
9. TiN-Coatings Deposited by Triode ion Plating on Tools and Dies10.1016/S0007-8506(07)61855-1 ↗
10. Erosion Caused by Impact of Solid Particles10.1016/S0161-9160(13)70071-1 ↗
11. Technical note: A review of cathodic arc plasma deposition processes and their applications10.1016/0257-8972(87)90157-5 ↗
12. Protective coatings in the gas turbine engine
13. Fang, Z., Chen, J., He, W., Yang, Z., Yuan, Z., Geng, M., and He, G. (2019). Study on damage mechanism of TiN/Ti coatings based on multi-directional impact. Coatings, 9.10.3390/coatings9110765 ↗
14. Multivariate analysis of anionic, cationic and nonionic textile surfactant degradation with the H2O2/UV-C process by using the capabilities of response surface methodology10.1016/j.jhazmat.2010.09.018 ↗
15. Biological assessments of a mixture of endocrine disruptors at environmentally relevant concentrations in water following UV / H2O2 oxidation10.1016/j.scitotenv.2006.12.051 ↗
16. Oxidation mechanism and overall removal rates of endocrine disrupting chemicals by aquatic plants10.1016/j.jhazmat.2013.11.042 ↗
17. KrF excimer laser dry and steam cleaning of silicon surfaces with metallic particulate contaminants10.1007/s003390100868 ↗
18. Laser cleaning: An alternative method for removing oil-spill fuel residues10.1016/j.apsusc.2005.01.086 ↗
19. Metal thin film ablation with femtosecond pulsed laser10.1016/j.optlastec.2006.10.001 ↗
20. Comparison of mechanisms and effects of Nd:YAG and CO2 laser cleaning of titanium alloys10.1016/j.apsusc.2005.06.050 ↗
21. Laser cleaning of micro-particles from a solid surface-theory and applications10.1016/S0254-0584(98)00026-1 ↗
22. Laser-cleaning techniques for removal of surface particulates10.1063/1.350906 ↗
23. Modelling and diagnostic of pulsed laser cleaning of oxidized metallic surfaces10.1016/0169-4332(95)00500-5 ↗
24. Efficient pulsed laser removal of 0.2 μm sized particles from a solid surface10.1063/1.104931 ↗
25. A study of the surface products on zinc-coated steel during laser ablation cleaning10.1016/S0257-8972(00)01118-X ↗
26. Parameters and surface performance of laser removal of rust layer on A3 steel10.1016/S0257-8972(02)00736-3 ↗
27. Effectiveness of laser cleaning for grinding wheel loading10.4028/www.scientific.net/KEM.238-239.289 ↗
28. Selective pulsed laser stripping of TiAlN erosion-resistant coatings: Effect of wavelength and pulse duration10.1016/j.surfcoat.2013.06.092 ↗
29. Assessment of gradient and nanogradient PVD coatings behaviour under erosive, abrasive and impact wear conditions10.1016/j.wear.2008.12.045 ↗
30. Zhang, Z., Chen, J., He, G., Yang, Z., and Yang, G. (2019). Fatigue and Mechanical Behavior of Ti-6Al-4V Alloy with CrN and TiN Coating Deposited by Magnetic Filtered Cathodic Vacuum Arc Process. Coatings, 9.10.3390/coatings9100689 ↗
31. Two new mechanisms for laser cleaning using Nd:YAG sources10.1016/S1296-2074(02)01229-3 ↗
32. Mechanisms of laser cleaning
33. Dry laser cleaning of anodized aluminum
34. Laser removal of TiN coatings from WC micro-tools and in-process monitoring10.1016/j.optlastec.2010.03.016 ↗
35. Material morphological characteristics in laser ablation of alpha case from titanium alloy10.1016/j.apsusc.2012.04.173 ↗
36. Yang, S.K. (2006). Laser Cleaning as A Conservation Technique for Corroded Metal Artifacts. [Ph.D. Thesis, Luleå University of Technology].