Influence of Surface Roughness and Agitation on the Morphology of Magnetite Films Electrodeposited on Carbon Steel Substrates
Source abstract
Abstract
In this work, we investigated the effects of surface roughness and agitation on the morphology of magnetite films electrodeposited from alkaline Fe(III)-triethanolamine (TEA) solutions on carbon steel substrates. The surface roughness of the carbon steel substrates was maintained in the range of 1.64–0.06 μm by using mechanical grinding and polishing methods. The agitation speed was set at 0 and 900 rpm during the electrodeposition process. The particle size and surface roughness value of the magnetite films gradually decreased with decreasing substrate roughness. However, the influence of the substrate roughness on the thickness of the magnetite film was negligible. The morphology of the magnetite film fabricated at 900 rpm appeared to be highly faceted compared to that of the magnetite film produced at 0 rpm. The thickness and surface roughness of the magnetite film significantly increased with the agitation speed, which also significantly affected the electrodeposition efficiency. The effects of substrate surface roughness and agitation on the morphology of magnetite films electrodeposited on carbon steel substrates were also discussed. The obtained results provide critical information for the simulation of magnetite deposits on carbon steel pipes in the secondary systems of nuclear power plants.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Non-Destructive Testing Techniques · Surface Roughness and Optical Measurements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Nuclear Materials Safety Reserach Division, Korea Atomic Energy Research Institute, Daejeon 305-353, Korea
References (35)
Show source-provided references
1. Electronic conduction of magnetite (Fe3O4) and its transition point at low temperature10.1038/144327b0 ↗
2. The Verwey transition-a topical review10.1088/0953-8984/14/12/203 ↗
3. Burrill, K.A., and Cheluget, E.L. (1998, January 13–16). Corrosion of CANDU Outlet Feeder Pipes. Proceedings of the International Conference on Water Chemistry in Nuclear Power Plants, Nigata, Japan.
4. Cook, W.G., and Lister, D.H. (2004, January 11–14). Some Aspects of Electrochemistry and Corrosion Mechanisms Influencing Flow Assisted Corrosion in CANDU Outlet Feeder Pipes. Proceedings of the International Conference on Water Chemistry of Nuclear Reactor Systems, San Francisco, CA, USA.
5. Jung, K.S., and Sung, K.W. (2010). Magnetite: Structure, Properties and Applications, Nova Science Publishers.
6. Shah, V.N. (, January July). Flow-Accelerated Corrosion of PWR Carbon Steel Components. Presented at Symposium on Life Extension and Aging Management of Nuclear Power Plant Components in Korea, Taejon, Korea.
7. (2004). JAIF Focus, Japan Atomic Industrial Forum, Inc.
8. Electrodeposition of magnetite on carbon steel in Fe(III)-triethanolamine solution and its corrosion behavior10.2320/matertrans.M2015016 ↗
9. Effect of polyacrylic acid on the corrosion behavior of carbon steel and magnetite in alkaline aqueous solutions10.5006/2018 ↗
10. Preparation and magnetic properties of Fe3O4 nanostructures grown by electrodeposition10.1149/1.1854128 ↗
11. Thin layers of iron corrosion products electrochemically deposited on inert substrates: synthesis and behavior10.1016/j.electacta.2004.01.048 ↗
12. Investigation on capacitance mechanisms of Fe3O4 electrochemical capacitors10.1149/1.2131820 ↗
13. A morphological study of nanocrystalline magnetite electrodeposited onto polycrystalline copper substrates10.1149/1.2767002 ↗
14. Preparation of well-defined colloidal particles by thermal decomposition of metal chelates. I. Iron oxides10.1016/0021-9797(80)90210-6 ↗
15. Growth and electrochemical characterization versus lithium of Fe3O4 electrodes made by electrodeposition10.1002/adfm.200500753 ↗
16. High rate capabilities Fe3O4-based Cu nano-architectured electrodes for lithium-ion battery applications10.1038/nmat1672 ↗
17. Electrochemical deposition and characterization of Fe3O4 films produced by the reduction of Fe(III)-triethanolamine10.1557/jmr.2006.0030 ↗
18. Electrodeposition of epitaxial magnetite films and ferrihydritenanoribbons on single-crystal gold10.1021/cm9013514 ↗
19. Epitaxial electrodeposition of Fe3O4 on single-crystal Ni(111)10.1021/cm2002176 ↗
20. Goujon, C., Pauporté, T., Mansour, C., Delaunary, S., and Bretelle, J.L. (2013, January 9–14). Fouling of Steam Generator Tubes in Nuclear Power Plants: Laboratory Tests to Reproduce Oxides Deposition. Proceedings of the International Conference on Heat Exchanger Fouling and Cleaning, Budapest, Hungary.
21. Electrochemical deposition of thick iron oxide films on nickel based superalloy substrates10.1016/j.electacta.2015.06.045 ↗
22. Growth morphology study of cathodically electrodeposited Fe3O4thin films at elevated temperatures10.1016/j.materresbull.2010.06.065 ↗
23. Substrate surface roughness-dependent 3-D complex nanoarchitectures of gold particles from directed electrodeposition10.1039/B816835K ↗
24. Electrochemical nucleation: Part I. General considerations10.1016/0022-0728(82)85080-8 ↗
25. From a two-dimensional chemical pattern to a three-dimensional topology through selective inversion of a liquid-liquid bilayer10.1038/nmat1787 ↗
26. Microfluidics: Fluid physics at the nanoliter scale10.1103/RevModPhys.77.977 ↗
27. Effect of indium tin oxide substrate roughness on the morphology, structural and optical properties of CdS thin films10.1016/S0169-4332(99)00574-7 ↗
28. Electrodeposition of gold from cyanide dolution on different n-GaAs crystal faces10.1016/j.jelechem.2004.06.012 ↗
29. The effect of current density on properties of electrodeposited nanocrystalline nockel10.1023/A:1025049802635 ↗
30. Effect of substrate texture and deposition current density on properties of Ni nanocrystalline electrodeposition
31. Effect of Hydrogen on the Three-Dimensional Epitaxial Growth of Ni(100), (110), and (111)10.1021/jp0012092 ↗
32. Optimisation of process parameters for electroless plating of Co-W-P capping layers from an alkali-metal-free bath10.1016/j.surfcoat.2008.04.077 ↗
33. Combination performance characteristics of agitated nickel hypophosphite electroless plating baths10.1016/j.jmatprotec.2011.03.022 ↗
34. The relationship between crystal morphology and XRD peak intensity on CaSO4·2H2O10.1016/j.jcrysgro.2013.06.017 ↗
35. Steam generator deposits-a detailed analysis and some inferences10.5006/1.3585283 ↗