journal article·2021-06-22Open access

Based on Ultrathin PEDOT:PSS/c-Ge Solar Cells Design and Their Photoelectric Performance

Ju Su, Hua Yang, Yan Xu, Yijun Tang, Zao Yi, Fusheng Zheng, Fei Zhao, Li Liu, Pinghui Wu, Hailiang Li

Coatings· Volume 11· Issue 7

Abstract

In recent years, nanostructures have improved the performance of solar cells and are regarded as the most promising microstructures. The optical properties of PEDOT:PSS/c-Ge hybrid solar cells (HSCs) based on the octagon germanium nanoparticles (O-GNPs) were numerically analyzed using the finite-difference time-domain (FDTD) method. The optimal structure of the hybrid solar cell is determined by changing the thickness of the organic layer and structural parameters of nanoparticles to enhance the optical absorption and eventually achieve high broadband absorption. By changing the structure parameter of O-GNPs, we studied its effect on solar cells. The optimization of geometric parameters is based on maximum absorption. The light absorption of our optimized HSCs is basically above 90% between 200 and 1500 nm. PEDOT:PSS is placed on top of O-GNPs to transmit the holes better, allowing O-GNPs to capture a lot of photons, to increase absorbance value properties in the AM1.5 solar spectral irradiated region. The transmittance is increased by adding poly-methyl methacrylate (PMMA). At the same time, the electrical characteristics of Ge solar cells were simulated by DEVICE, and short-circuit current (Jsc), open-circuit voltage (Voc), maximum power (Pmax), filling coefficient (FF) and photoelectric conversion efficiency (PCE) were obtained. According to the optimization results after adjusting the structural parameters, the maximum short-circuit current is 44.32 mA/cm2; PCE is 7.84 mW/cm2; FF is 69%. The results show that the O-GNPs have a good light trapping effect, and the structure design has great potential for the absorption of HSCs; it is believed that the conversion efficiency will be further improved through further research.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Joint Laboratory for Extreme Conditions Matter Properties, Southwest University of Science and Technology, Mianyang 621010, China

State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China

School of Science, Huzhou University, Huzhou 313000, China

College of Science, Zhejiang University of Technology, Hangzhou 310023, China

Fujian Provincial Key Laboratory for Advanced Micro-Nano Photonics Technology and Devices, Quanzhou Normal University, Quanzhou 362000, China

Key Laboratory of Microelectronic Devices & Integrated Technology, Institute of Microelectronics, Chinese Academy of Sciences, Beijing 100029, China

Funding

National Natural Science Foundation of China

References (64)

Show source-provided references
1. Broadband polariza-tion-insensitive and wide-angle solar energy absorber based on tungsten ring-disc array10.1039/D0NR04502K ↗
2. Broadband solar energy absorber based on monolayer molybdenum disulfide using tungsten elliptical arrays10.1016/j.mtener.2020.100390 ↗
3. Blue and green double band luminescent carbon quantum dots: Synthesis, origin of photoluminescence, and application in white light-emitting devices10.1063/5.0046495 ↗
4. Dynamic control of double plasmon-induced transparencies in aperture-coupled waveguide-cavity system10.1007/s11468-017-0519-z ↗
5. Tungsten disulphide for ultrashort pulse generation in all-fiber lasers10.1039/C7NR00971B ↗
6. One-step fabrication of graphene oxide enhanced magnetic composite gel for highly efficient dye adsorption and catalysis10.1021/acssuschemeng.5b00383 ↗
7. Tert-butylamine/oleic acid-assisted morphology tailoring of hierarchical Bi4Ti3O12 architectures and their application for photodegradation of simulated dye wastewater10.1016/j.optmat.2020.110781 ↗
8. Facile synthesis of Ag@Cu2O heterogeneous nanocrystals decorated N-doped reduced graphene oxide with enhanced electrocatalytic activity for ultrasensitive detection of H2O210.1016/j.snb.2018.01.068 ↗
9. 40% efficient metamorphic GaInP/GaInAs/Ge multijunction solar cells10.1063/1.2734507 ↗
10. Influence of laterally split spectral illumination on multi-junction CPV solar cell performance10.1016/j.solener.2018.05.033 ↗
11. Influence of a degraded triple-junction solar cell on the CPV system performances10.1016/j.enconman.2018.01.026 ↗
12. Effect of the N/P and transition-metal co-doping on the quantum capacitance of supercapacitor electrodes based on mono-and multilayer graphene10.1016/j.carbon.2020.08.045 ↗
13. Advances in hybrid solar photovoltaic and thermoelectric generators10.1016/j.rser.2016.10.042 ↗
14. Performance evaluation of single multi-junction solar cell for high concentrator photovoltaics using minichannel heat sink with nanofluids10.1016/j.applthermaleng.2020.115868 ↗
15. Ultrathin resonant-cavity-enhanced amorphous germanium solar cells on ZnO10.1109/JPHOTOV.2017.2762527 ↗
16. High-efficiency heterojunction solar cells on crystalline germanium substrates, oxide-based materials & devices v, international society for optics and photonics10.1063/1.4737166 ↗
17. Impact of the III-V/Ge nucleation routine on the performance of high efficiency multijunction solar cells. Sol10.1016/j.solmat.2019.110355 ↗
18. Efficient manipulation of terahertz waves by multi-bit coding metasurfaces and its further application
19. Effects of molybdenum oxide molecular doping on the chemical structure of poly(3,4-ethylenedioxythiophene):poly(stylenesulfonate) and on carrier collection efficiency of silicon/poly(3,4-ethylenedioxythiophene):poly(stylenesulfonate) heterojunction solar cells
20. Bulk heterojunction polymer solar cell and perovskite solar cell: Concepts, materials, current status, and opto-electronic properties10.1016/j.solener.2018.07.058 ↗
21. Stretchable and conductive polymer films prepared by solution blending10.1021/acsami.5b04492 ↗
22. Enhanced interface of polyurethane acrylate via perfluoropolyether for efficient transfer printing and stable operation of PEDOT:PSS in perovskite photovoltaic cells10.1016/j.apsusc.2018.10.066 ↗
23. Li, Z., Yi, Y., Xu, D., Yang, H., Yi, Z., Chen, X., Yi, Y., Zhang, J., and Wu, P. (2021). A multi-band and polarization-independent perfect absorber based on dirac semimetals circles and semi-ellipses array. Chin. Phys. B.10.1088/1674-1056/abfb57 ↗
24. Polarization-sensitive triple plasmon-induced transparency with synchronous and asynchronous switching based on monolayer graphene metamaterials10.1364/OE.410417 ↗
25. Tunable multi-band terahertz absorber based on composite graphene structures with square ring and Jerusalem cross10.1016/j.rinp.2021.104233 ↗
26. High performance ITO-free white organic light-emitting diodes using highlyconductive PEDOT:PSS transparent electrodes10.1016/j.synthmet.2018.05.009 ↗
27. Demonstrating the high voc potential of PEDOT:PSS/c-Si heterojunctions on solar cells10.1016/j.egypro.2017.09.295 ↗
28. Theoretical analysis of band alignment at back junction in Sn–Ge perovskite solar cells with inverted p-i-n structure. Sol10.1016/j.solmat.2019.110268 ↗
29. Study on the solar energy absorption of hybrid solar cells with trapezoid-pyramidal structure based PEDOT:PSS/c-Ge10.1016/j.solener.2020.05.030 ↗
30. Novel hierarchical sea urchin-like Prussian blue@palladium core-shell heterostructures supported on nitrogen-doped reduced graphene oxide: Facile synthesis and excellent guanine sensing performance10.1016/j.electacta.2019.135196 ↗
31. Gold nanoparticals doping graphene sheets nanocomposites sensitized screen-printed carbon electrode as a disposable platform for voltammetric determination of guaiacol in bamboo juice10.1016/S1452-3981(23)08152-X ↗
32. Si/PEDOT:PSS core/shell nanowire arrays for efficient hybrid solar cells10.1039/c1nr10629e ↗
33. Three-dimensional core−shell hybrid solar cells via controlled in situ materials engineering10.1021/nl301251q ↗
34. Optical absorption enhancement in silicon nanohole arrays for solar photovoltaics10.1021/nl904187m ↗
35. Light trapping in silicon nanowire solar cells10.1021/nl100161z ↗
36. Enhanced light absorption of silicon solar cells with dielectric nanostructured back reflector10.1016/j.optcom.2018.02.051 ↗
37. Ge quantum-dot enhanced c–Si solar cell for improved light trapping efficiency10.1016/j.solener.2018.03.074 ↗
38. Design of InP-based truncated nanopyramid solar cells with conformal coating of PEDOT: PSS for improved light harvesting efficiency10.1016/j.optmat.2020.110475 ↗
39. Light-trapping strategy for PEDOT:PSS/c-Si nanopyramid based hybrid solar cells embedded with metallic nanoparticles10.1016/j.solener.2019.08.023 ↗
40. Facile synthesis of germanium nanocrystals and their application in organic–inorganic hybrid photodetectors10.1002/adma.201101436 ↗
41. Improved short-circuit current density in bulk heterojunction solar cells with reduced graphene oxide-germanium dioxide nanocomposite in the photoactive layer10.1016/j.matchemphys.2020.123448 ↗
42. Multi-band, tunable, high figure of merit, high sensitivity single-layer patterned graphene—perfect absorber based on surface plasmon resonance10.1016/j.diamond.2021.108393 ↗
43. Multi-band multi-tunable perfect plasmon absorber based on L-shaped and double-elliptical graphene stacks10.1016/j.diamond.2021.108374 ↗
44. Terahertz tunable three band narrowband perfect absorber based on dirac semimetal10.1016/j.physe.2021.114750 ↗
45. Dual band visible metamaterial absorbers based on four identical ring patches10.1016/j.physe.2020.114526 ↗
46. Development and application of tetrabromobisphenol A imprinted electrochemical sensor based on graphene/carbon nanotubes three-dimensional nanocomposites modified carbon electrode10.1016/j.talanta.2014.11.040 ↗
47. Broadband plasmon-induced transparency modulator in the terahertz band based on multilayer graphene metamaterials10.1364/JOSAA.420743 ↗
48. Triple plasmon-induced transparency in graphene and metal metamaterials and its anomalous property10.1088/1361-6463/abf8ef ↗
49. Outstanding slow-light effect for graphene metasurface in terahertz10.1016/j.rinp.2021.104002 ↗
50. Unidirectional reflectionless propagation of near-infrared light in resonator-assisted non-parity-time symmetric waveguides10.1088/1367-2630/abf45a ↗
51. Triple plasmon-induced transparency and optical switch desensitized to polarized light based on a mono-layer metamaterial10.1364/OE.425315 ↗
52. A novel plasmonic refractive index sensor based on gold/silicon complementary grating structure10.1088/1674-1056/abd690 ↗
53. Junction model and transport mechanism in hybrid PEDOT:PSS/n-GaAs solar cells10.1016/j.orgel.2017.09.044 ↗
54. Towards high efficiency thin film solar cells10.1016/j.pmatsci.2017.02.003 ↗
55. Absorption enhancement in thin film a-Si solar cells with double-sided SiO2 particle layers10.1088/1674-1056/24/10/104201 ↗
56. Understanding the open circuit voltage in organic solar cells on the basis of a donor-acceptor abrupt (p-n++) heterojunction10.1016/j.solener.2019.04.031 ↗
57. Ge, S.B., Liu, W.G., Zhou, S., Li, S.J., Sun, X.P., Huang, Y.T., Yang, P.F., Zhang, J., and Lin, D.B. (2018). design and preparation of a micro-pyramid structured thin film for broadband infrared antireflection. Coatings, 8.10.3390/coatings8050192 ↗
58. Facile synthesis of mesoporous titanium dioxide doped by Ag-coated graphene with enhanced visible-light photocatalytic performance for methylene blue degradation10.1039/C7RA02198D ↗
59. Cobalt-nickel bimetallic nanoparticles decorated graphene sensitized imprinted electrochemical sensor for determination of octylphenol10.1016/j.electacta.2015.04.054 ↗
60. N/O double-doped biomass hard carbon material realizes fast and stable potassium ion storage10.1016/j.carbon.2021.01.114 ↗
61. Magnetic carbon dots based molecularly imprinted polymers for fluorescent detection of bovine hemoglobin10.1016/j.talanta.2018.05.068 ↗
62. A universal double-side passivation for high open-circuit voltage in perovskite solar cells: Role of carbonyl groups in poly(methyl methacrylate)10.1002/aenm.201801208 ↗
63. An eco-friendly imprinted polymer based on graphene quantum dots for fluorescent detection of p-nitroaniline10.1039/C9RA08726E ↗
64. The effect of injection barrier on the open-circuit voltage of organic photovoltaic cells10.1016/j.matpr.2020.05.677 ↗