Tribology and Surface Engineering
Source abstract
Abstract
The Special Issue on Tribology and Surface Engineering includes nine research articles and one review article. It concerns a very important problem of resistance to wear and shaping the properties of the surface layers of different materials by different methods and technologies. The topics of the presented research articles include reactive direct current magnetron sputtering of silicon nitrides on implants, laser surface modification of aeroengine turbine blades, laser micro-texturing of titanium alloy to increase the tribological characteristics, electroplating of Cu–Sn composite coatings incorporated with Polytetrafluoroethylene (PTFE) and TiO2 particles, arc spraying of self-lubricous coatings, high velocity oxygen fuel (HVOF) spraying and gas nitriding of stainless steel coatings, HVOF spraying composite WC-Co coatings, testing of coatings deposited by physical vapour deposition (PVD), and also analysis of material removal and surface creation in wood sanding. The special issue provides valuable knowledge based on theoretical and empirical study in the field of coating technologies, as well as characterization of coatings, and wear phenomena.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Welding Engineering, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A street, 44-100 Gliwice, Poland
References (31)
Show source-provided references
1. Kamat, A.M., Copley, S.M., Segall, A.E., and Todd, J.A. (2019). Laser-sustained plasma (LSP) nitriding of titanium: A review. Coatings, 9.10.3390/coatings9050283 ↗
2. Laser modification of the materials surface layer—A review paper
3. Janicki, D. (2018). Microstructure and sliding wear behaviour of in-situ TiC-reinforced composite surface layers fabricated on ductile cast iron by laser alloying. Materials, 11.10.3390/ma11010075 ↗
4. Mechanisms of hardness increase for composite surface layers during laser gas nitriding of the Ti6A14V alloy
5. Erosion wear resistance of titanium-matrix composite Ti/TiN produced by diode-laser gas nitriding10.17222/mit.2015.160 ↗
6. Comparison of titanium metal matrix composite surface layers produced during laser gas nitriding of Ti6Al4V alloy by different types of lasers10.1515/amm-2016-0287 ↗
7. Titanium matrix composite Ti/TiN produced by diode laser gas nitriding10.3390/met5010054 ↗
8. Tański, T., and Matysiak, W. (2018). Synthesis of the novel type of bimodal ceramic nanowires from polymer and composite fibrous mats. Nanomaterials, 8.10.3390/nano8030179 ↗
9. Laser welding of new grade of advanced high strength steel Domex 960
10. Pilarczyk, W. (2018). Structure and properties of Zr-based bulk metallic glasses in as-cast state and after laser welding. Materials, 11.10.3390/ma11071117 ↗
11. Kik, T., and Górka, J. (2019). Numerical simulations of laser and hybrid S700MC T-joint welding. Materials, 12.10.3390/ma12030516 ↗
12. Tomków, J., Rogalski, G., Fydrych, D., and Łabanowski, J. (2019). Advantages of the application of the temper bead welding technique during wet welding. Materials, 12.10.3390/ma12060915 ↗
13. Effect of carbon nanoparticle reinforcement on mechanical and thermal properties of silicon carbide ceramics10.1016/j.ceramint.2018.03.034 ↗
14. Górka, J., Czupryński, A., Żuk, M., Adamiak, M., and Kopyść, A. (2018). Properties and structure of deposited nanocrystalline coatings in relation to selected construction materials resistant to abrasive wear. Materials, 11.10.3390/ma11071184 ↗
15. Impact toughness of laser-welded butt joints of the new steel grade Strenx 1100MC
16. Haghighi, M., Shaeri, M.H., Sedghi, A., and Djavanroodi, F. (2018). Effect of graphene nanosheets content on microstructure and mechanical properties of titanium matrix composite produced by cold pressing and sintering. Nanomaterials, 8.10.3390/nano8121024 ↗
17. Characteristics of the AlTiCrN + DLC coating deposited with a cathodic arc and the PACVD process10.17222/mit.2014.104 ↗
18. The investigation of microstructures and properties of high speed steel HS6-5-2-5 after laser alloying10.2478/amm-2014-0280 ↗
19. Lisiecki, A. (2019). Study of optical properties of surface layers produced by laser surface melting and laser surface nitriding of titanium alloy. Materials, 12.10.3390/ma12193112 ↗
20. Tribological characteristic of titanium alloy surface layers produced by diode laser gas nitriding10.1515/amm-2016-0094 ↗
21. Fabrication of high chromium white iron surface layers on ductile cast iron substrate by laser surface alloying
22. Liu, H., Liu, H., Zhu, C., and Zhou, Y. (2019). A review on micropitting studies of steel gears. Coatings, 9.10.3390/coatings9010042 ↗
23. Michalczewski, R., Kalbarczyk, M., Mańkowska-Snopczyńska, A., Osuch-Słomka, E., Piekoszewski, W., Snarski-Adamski, A., Szczerek, M., Tuszyński, W., Wulczyński, J., and Wieczorek, A. (2019). The effect of a gear oil on abrasion, scuffing, and pitting of the DLC-coated 18CrNiMo7-6 steel. Coatings, 9.10.3390/coatings9010002 ↗
24. Lindner, T., Kutschmann, P., Löbel, M., and Lampke, T. (2018). Hardening of HVOF-sprayed austenitic stainless-steel coatings by gas nitriding. Coatings, 8.10.3390/coatings8100348 ↗
25. Ding, X., Ke, D., Yuan, C., Ding, Z., and Cheng, X. (2018). Microstructure and cavitation erosion resistance of HVOF deposited WC-Co coatings with different sized WC. Coatings, 8.10.3390/coatings8090307 ↗
26. Tillmann, W., Hagen, L., Kokalj, D., Paulus, M., and Tolan, M. (2019). Temperature-induced formation of lubricous oxides in vanadium containing iron-based arc sprayed coatings. Coatings, 9.10.3390/coatings9010018 ↗
27. Filho, L., Schmidt, S., Leifer, K., Engqvist, H., Högberg, H., and Persson, C. (2019). Towards functional silicon nitride coatings for joint replacements. Coatings, 9.10.3390/coatings9020073 ↗
28. Ying, L., Fu, Z., Wu, K., Wu, C., Zhu, T., Xie, Y., and Wang, G. (2019). Effect of TiO2 sol and PTFE emulsion on properties of Cu–Sn antiwear and friction reduction coatings. Coatings, 9.10.3390/coatings9010059 ↗
29. Vazquez Martinez, J.M., Del Sol Illana, I., Iglesias Victoria, P., and Salguero, J. (2019). Assessment the sliding wear behavior of laser microtexturing Ti6Al4V under wet conditions. Coatings, 9.10.3390/coatings9020067 ↗
30. Liu, S., Yu, H., Wang, Y., Zhang, X., Li, J., Chen, S., and Liu, C. (2019). Cracking, microstructure and tribological properties of laser formed and remelted K417G Ni-based superalloy. Coatings, 9.10.3390/coatings9020071 ↗
31. Zhang, J., Ying, J., Cheng, F., Liu, H., Luo, B., and Li, L. (2018). Investigating the sanding process of medium-density fiberboard and Korean Pine for material removal and surface creation. Coatings, 8.10.3390/coatings8120416 ↗