High-Temperature Oxidation Resistance of NiAl Intermetallic Formed In Situ by Thermal Spraying
Source abstract
Abstract
An Al/Ni composite coating was deposited on the surface of a pure Ti substrate by arc spray technology and plasma spray technology. In order to enable the in-situ reaction between the Al/Ni composite coating and the specimen, they were heated under different conditions. In addition, oxidation testing was conducted to test the oxidation-resistant property of the coating. The phase transition regulation of the coating after heating, the influence of heating at different temperatures and time on the reaction depth, and the correlated theory of the in-situ formation of the NiAl intermetallic compounds were studied and analyzed. The results showed that after the heat treatment, a ragged wave-like morphology was exhibited in the diffusion front of Al, and a small amount of the Ni in the diffusion region did not participate in the reaction. The growth of the NiAl intermetallic layer in the diffusion region of the Al/Ni/Ti specimen was obviously slower compared with the Al/Ni specimen.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Material Science and Engineering, Shenyang University of Technology, Shenyang 110870, China
Guidao jiaotong Polytechnic Institute, Shenyang 110023, China
Dalian Huarui Heavy Industrial Special Spare Parts Co., Ltd., Dalian 116052, China
Funding
Natural Science Foundation of Liaoning Province · National Natural Science Foundation of China
References (30)
Show source-provided references
1. Influence of oxygen impurities on growth morphology, structure and mechanical properties of Ti-Al-N thin films10.1016/j.tsf.2016.01.039 ↗
2. Effect of NiAl content on phases and microstructures of TiC-TiB2-NiAl composites fabricated by reaction synthesis10.1016/S1003-6326(14)63067-3 ↗
3. Phase evolution during the reactive sintering of ternary Al-Ni-Ti powder compacts10.1016/j.jallcom.2015.11.105 ↗
4. Vera, M.L., Colaccio, Á., Rosenberger, M.R., Schvezov, C.E., and Ares, A.E. (2017). Influence of the Electrolyte Concentration on the Smooth TiO2 Anodic Coatings on Ti-6Al-4V. Coatings, 7.10.20944/preprints201703.0019.v1 ↗
5. A Modified Surface on Titanium Deposited by a Blasting Process10.3390/coatings1010053 ↗
6. A magnetron sputtered microcrystalline beta-NiAl coating for SC superalloys. Part II. Effects of a NiCrO diffusion barrier on oxidation behavior at 1100 degrees C10.1016/j.apsusc.2017.02.245 ↗
7. Oxidation mechanisms for nickel-aluminum alloys at temperatures between 900° and 1300 °C
8. Cyclic oxidation behaviour of Co/Si co-doped beta-NiAl coating on nickel based superalloys10.1016/j.corsci.2018.01.032 ↗
9. Preparation of Ni aluminide/Ni bilayer coating on Nb-W alloys by molten salt electrodeposition and oxidation resistance10.1007/s11085-015-9574-z ↗
10. High temperature oxidation resistance and microstructure change of aluminized coating on copper substrate10.1016/S1003-6326(15)63594-4 ↗
11. Cyclic oxidation behavior and oxide scale adhesion of Al/NiCrAlY coating on pure titanium alloy10.1016/j.jallcom.2017.09.199 ↗
12. Silicide coatings on Ti-6Al-1Mn (at.%) alloy and their oxidation resistance10.1016/j.surfcoat.2017.12.004 ↗
13. Oxidation behavior of a high Si content Al-Si composite coating fabricated on Ti–6Al–4V substrate by mechanical alloying method10.1016/j.jallcom.2017.01.078 ↗
14. Effect of oxidation resistant Al3Ti coating on tensile properties of a near α-Ti alloy10.1016/j.surfcoat.2013.09.036 ↗
15. Microstructure and properties of Ti-Al coating and Ti-Al-Si system coatings on Ti-6Al-4V fabricated by laser surface alloying10.1016/j.surfcoat.2016.10.082 ↗
16. Formation and oxidation behavior of Ni2Al3 coating on heat-resistant Ti-alloy10.1016/j.intermet.2004.10.012 ↗
17. Preparation of Ni aluminide/Ni or TiAl3 bilayer coating on TiAl by molten salt electrodeposition and cyclic oxidation resistance10.2320/jinstmet.J2012064 ↗
18. Preparation of Ti-Al intermetallic compound by wire arc spraying
19. Ti-Al intermetallic compounds synthesis in coatings deposited by cold spraying
20. High-temperature oxidation of titanium10.1016/0022-5088(67)90017-3 ↗
21. Improvement of the oxidation and wear resistance of pure Ti by laser cladding at elevated temperature10.1016/j.surfcoat.2010.08.125 ↗
22. Oxidation behaviors of pure Ti thermal plasma spray coated Mo-Si-B alloys10.4028/www.scientific.net/MSF.695.365 ↗
23. High-Temperature Oxidation of Pure Titanium in Co2 and Ar-10%CO2 Atmospheres10.1007/BF01670504 ↗
24. A study of self-propagating high-temperature synthesis of NiAl in thermal explosion mode10.1016/S1359-6454(01)00387-1 ↗
25. In situ fabrication of α-Al2O3 and Ni2Al3 reinforced aluminum matrix composites in an Al–Ni2O3 system10.1016/j.apt.2010.09.016 ↗
26. Characterization of Al/Ni multilayers and their application in diffusion bonding of TiAl to TiC cermet10.1016/j.tsf.2012.01.001 ↗
27. Performance of an atmospheric plasma torch with various inlet angles10.1016/j.surfcoat.2004.07.038 ↗
28. Mechanisms of formation of diffusion aluminide coatings on nickel-base superalloys10.1007/BF00604047 ↗
29. Superior long-term oxidation resistance of Ni-Al coated TiAl alloys10.1016/j.intermet.2004.11.006 ↗
30. Nickel-aluminum diffusion: A study of evolution of microstructure and phase10.1016/j.matchar.2017.05.039 ↗