Mixed Convection Flow of Magnetized Casson Nanofluid over a Cylindrical Surface
Source abstract
Abstract
This work aimed to establish a numerical simulation of kerosene oil as a host Casson fluid flowing around a cylindrical shape with an applied magnetic field crossing through it, under constant wall temperature boundary conditions. Nanoparticles of zinc, aluminum, and titanium oxides were included to reinforce its thermal characteristics. The governing model was established based on the Tiwari and Das model. Graphical and numerical results for correlated physical quantities were gained through the Keller Box method, with the assistance of MATLAB software (9.2). The combined convection (λ>0 & λ<0), magnetic parameter (M>0), Casson parameter (β>0), and nanosolid volume fraction (0.1≤χ≤0.2) were the parameter ranges considered in this study. According to the current findings, the growth of mixed convection parameter or volume fraction of ultrafine particles contributes to boosting the rate of energy transport, skin friction, and velocity distribution. Zinc oxide–kerosene oil has the highest velocity and temperature, whatever the parameters influencing it.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanofluid Flow and Heat Transfer · Heat Transfer Mechanisms · Fluid Dynamics and Turbulent Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mathematics, College of Sciences and Humanities in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia
Special Interest Group of Modelling and Data Analytics (SIGMDA), Faculty of Ocean Engineering Technology and Informatics, Universiti Malaysia Terengganu, Kuala Nerus 21030, Terengganu, Malaysia
Department of Mathematics, Faculty of Science, Ajloun National University, Ajloun 26810, Jordan
Funding
Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia
References (84)
Show source-provided references
1. Casson fluid flow in a pipe filled with a homogeneous porous medium
2. A flow equation for pigment-oil suspensions of the printing ink type
3. Vinogradov, G.V., and Malkin, A.Y. (1977). Rheology of Polymers, Khimiya Publishers. (In Russian).
4. An approximate Casson fluid model for tube flow of blood
5. An equation for the flow of blood, plasma and serum through glass capillaries10.1038/183613a0 ↗
6. Ali, A., Bukhari, Z., Umar, M., Ismail, M.A., and Abbas, Z. (2021). Cu and Cu-SWCNT Nanoparticles’ Suspension in Pulsatile Casson Fluid Flow via Darcy–Forchheimer Porous Channel with Compliant Walls: A Prospective Model for Blood Flow in Stenosed Arteries. Int. J. Mol. Sci., 22.10.3390/ijms22126494 ↗
7. Unsteady boundary layer flow of a Casson fluid due to an impulsively started moving flat plate10.1002/htj.20358 ↗
8. Casson fluid flow over an unsteady stretching surface10.1016/j.asej.2013.04.004 ↗
9. Unsteady MHD free convection flow of Casson fluid past over an oscillating vertical plate embedded in a porous medium
10. Casson fluid flow with variable thermo-physical property along exponentially stretching sheet with suction and exponentially decaying internal heat generation using the homotopy analysis method10.1016/j.jnnms.2015.02.001 ↗
11. Effect of chemical reaction on heat and mass transfer by mixed convection flow of casson fluid about a sphere with partial slip10.1166/jctn.2016.5405 ↗
12. Numerical exploration of heat transfer and Lorentz force effects on the flow of MHD Casson fluid over an upper horizontal surface of a thermally stratified melting surface of a paraboloid of revolution10.1515/ijnsns-2016-0087 ↗
13. Generalized differential quadrature analysis of unsteady three-dimensional MHD radiating dissipative Casson fluid conveying tiny particles10.1002/htj.21736 ↗
14. MHD natural convection of Sodium Alginate Casson nanofluid over a solid sphere
15. Heat transfer analysis of ethylene glycol-based Casson nanofluid around a horizontal circular cylinder with MHD effect10.1177/0954406220908624 ↗
16. Mixed convection stagnation point flow of the blood based hybrid nanofluid around a rotating sphere10.1038/s41598-021-86868-x ↗
17. Natural convection flow of Sodium Alginate based Casson nanofluid about a solid sphere in the presence of a magnetic field with constant surface heat flux10.1088/1742-6596/1366/1/012005 ↗
18. Choi, S.U., and Eastman, J.A. (1995). Enhancing Thermal Conductivity of Fluids with Nanoparticles, Argonne National Lab.10.1115/IMECE1995-0926 ↗
19. Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles10.1063/1.1341218 ↗
20. Heat transfer performance and transport properties of ZnO–ethylene glycol and ZnO–ethylene glycol–water nanofluid coolants10.1016/j.apenergy.2014.09.023 ↗
21. Experimental study of heat transfer enhancement using nanofluid in double tube heat exchanger10.1016/j.egypro.2017.12.090 ↗
22. An experimental investigation of pool boiling characteristics of alumina-water nanofluid over micro-/nanostructured surfaces10.1080/01457632.2018.1496980 ↗
23. Experimental study of nucleate pool boiling heat transfer of self-rewetting solution by surface functionalization with TiO2 nanostructure10.1002/cjce.23399 ↗
24. Experimental investigation of nucleate pool boiling heat transfer enhancement of TiO2-water based nanofluids10.1016/j.applthermaleng.2016.11.127 ↗
25. Effect of groove geometry on pool boiling heat transfer of water-titanium oxide nanofluid10.1007/s00231-018-2388-1 ↗
26. Structure, DFT calculations and heat transfer enhancement in [ZnO/PG+ H2O] C hybrid nanofluid flow as a potential solar cell coolant application in a double-tube10.1007/s10854-020-04089-w ↗
27. MHD free convection of Al2O3–water nanofluid considering thermal radiation: A numerical study10.1016/j.ijheatmasstransfer.2016.01.059 ↗
28. Numerical simulation of natural convection of Glycol-Al2O3 nanofluids from a horizontal cylinder10.1080/01457632.2019.1699303 ↗
29. A numerical study on ZnO based nanofluids behavior on natural convection10.1016/j.ijheatmasstransfer.2017.06.069 ↗
30. Numerical investigation on the single phase forced convection heat transfer characteristics of TiO2 nanofluids in a double-tube counter flow heat exchanger10.1016/j.icheatmasstransfer.2010.12.009 ↗
31. Numerical Investigation of Laminar Flow Heat Transfer of TiO2-Water Nanofluid in a Heated Pipe10.1080/01457632.2020.1818379 ↗
32. Terenzi, A., Marchetti, B., Leporini, M., Poesio, P., and Liu, J. (2019). Experimental and Numerical Study of Multiphase Flow Phenomena and Models in Oil & Gas Industry, Elsevier.10.1016/j.petlm.2019.04.004 ↗
33. Experimental and numerical investigation of natural convection in tilted square cavity filled with air10.1016/j.expthermflusci.2018.08.023 ↗
34. Numerical study of choked two-phase flow of hydrocarbons fluids through orifices10.1016/j.jlp.2013.10.014 ↗
35. Effects of different shaped nanoparticles on the performance of engine-oil and kerosene-oil: A generalized Brinkman-type fluid model with non-singular kernel10.1038/s41598-018-33547-z ↗
36. Convection heat transfer in micropolar nanofluids with oxide nanoparticles in water, kerosene and engine oil10.1016/j.molliq.2016.12.040 ↗
37. Structural impact of Kerosene-Al2O3 nanoliquid on MHD Poiseuille flow with variable thermal conductivity: Application of cooling process10.1016/j.molliq.2018.05.103 ↗
38. Heat transfer analysis of Cu–Al2O3–water and Cu–Al2O3–kerosene oil hybrid nanofluids in the presence of frictional heating: Using 3-stage Lobatto IIIA formula10.1166/jon.2019.1626 ↗
39. Numerical investigation of heat transfer enhancement with Ag-GO water and kerosene oil based micropolar nanofluid over a solid sphere
40. Numerical Solution of Heat Transfer Flow in Micropolar Nanofluids with Oxide Nanoparticles in Water and Kerosene Oil about a Horizontal Circular Cylinder
41. Thermophoresis and suction/injection roles on free convective MHD flow of Ag–kerosene oil nanofluid
42. Entropy analysis of a hydromagnetic micropolar dusty carbon NTs-kerosene nanofluid with heat generation: Darcy–Forchheimer scheme10.1007/s10973-020-09928-w ↗
43. Qasim, M., Khan, Z.H., Khan, W.A., and Ali Shah, I. (2014). MHD boundary layer slip flow and heat transfer of ferrofluid along a stretching cylinder with prescribed heat flux. PLoS ONE, 9.10.1371/journal.pone.0083930 ↗
44. Magnetohydrodynamic flow of Casson fluid over a stretching cylinder
45. Effects of radiation and magnetic field on mixed convection stagnation-point flow over a cylinder in a porous medium under local thermal non-equilibrium10.1007/s10973-019-08415-1 ↗
46. Hall and ion slip impacts on unsteady MHD convective rotating flow of heat generating/absorbing second grade fluid10.1016/j.aej.2020.10.013 ↗
47. Gyrotactic mixed bioconvection flow of a nanofluid past a circular cylinder with convective boundary condition10.1016/j.jtice.2019.02.035 ↗
48. Influence of porous circular cylinder on MHD double-diffusive natural convection and entropy generation10.1016/j.ijmecsci.2021.106625 ↗
49. Hall and ion slip effects on MHD rotating flow of elastico-viscous fluid through porous medium10.1016/j.icheatmasstransfer.2020.104494 ↗
50. Hall and ion slip effects on unsteady MHD free convective rotating flow through a saturated porous medium over an exponential accelerated plate10.1016/j.aej.2020.01.043 ↗
51. Hall and ion slip effects on MHD rotating boundary layer flow of nanofluid past an infinite vertical plate embedded in a porous medium
52. Heat and mass transfer on MHD flow of second-grade fluid through porous medium over a semi-infinite vertical stretching sheet10.1615/JPorMedia.2020023817 ↗
53. Investigations of Soret, Joule and Hall effects on MHD rotating mixed convective flow past an infinite vertical porous plate10.1016/j.joes.2019.05.002 ↗
54. Heat and Mass Transfer on MHD Free Convective Flow over an Infinite Nonconducting Vertical Flat Porous Plate10.1615/InterJFluidMechRes.2018025004 ↗
55. Heat and mass transfer on free convective flow of amicropolar fluid through a porous surface with inclined magnetic field and hall effects10.1615/SpecialTopicsRevPorousMedia.2018026943 ↗
56. Convective transport in nanofluids10.1115/1.2150834 ↗
57. Heat transfer augmentation in a two-sided lid-driven differentially heated square cavity utilizing nanofluids10.1016/j.ijheatmasstransfer.2006.09.034 ↗
58. Heat transfer enhancements in heat exchangers fitted with porous media Part I: Constant wall temperature10.1016/S1290-0729(02)00039-X ↗
59. Numerical simulation of laminar liquid film condensation in a horizontal circular minichannel10.1115/1.4005710 ↗
60. Single bubble growth in saturated pool boiling on a constant wall temperature surface10.1016/j.ijmultiphaseflow.2003.09.003 ↗
61. Partial nucleate boiling on the microscale heater maintaining constant wall temperature10.1080/18811248.2003.9715418 ↗
62. Merkin, J. (1976). Free convection boundary layer on an isothermal horizontal cylinder. Heat Transfer Conference, St. Louis, MO, USA, 9–11 August 1976, American Society of Mechanical Engineers and American Institute of Chemical Engineers.
63. Mixed convection from a horizontal circular cylinder10.1016/0017-9310(77)90086-2 ↗
64. Mixed convection boundary-layer flow from a horizontal circular cylinder in micropolar fluids: Case of constant wall temperature10.1108/09615530310456778 ↗
65. Mixed convection boundary layer flow from a horizontal circular cylinder in a micropolar fluid: Case of constant wall heat flux10.1615/InterJFluidMechRes.v31.i2.40 ↗
66. Mixed convection boundary layer flow from a horizontal circular cylinder in a nanofluid10.1108/09615531211231253 ↗
67. Mixed convection boundary-layer flow past a horizontal circular cylinder embedded in a porous medium filled with a nanofluid under convective boundary condition10.1016/j.compfluid.2013.07.030 ↗
68. Hamarsheh, A.S., Alwawi, F.A., Alkasasbeh, H.T., Rashad, A.M., and Idris, R. (2020). Heat transfer improvement in MHD natural convection flow of graphite oxide/carbon nanotubes-methanol based casson nanofluids past a horizontal circular cylinder. Processes, 8.10.3390/pr8111444 ↗
69. MHD flow and heat transfer in a Casson fluid over a nonlinearly stretching sheet with Newtonian heating10.1615/HeatTransRes.2018014771 ↗
70. Pop, I., and Ingham, D.B. (2001). Convective Heat Transfer: Mathematical and Computational Modelling of Viscous Fluids and Porous Media, Elsevier.
71. Acheson, D.J. (1991). Elementary Fluid Dynamics, Acoustical Society of America, Oxford University Press Inc.10.1121/1.400751 ↗
72. Manzoor, T., Zafar, M., Iqbal, S., Nazar, K., Ali, M., Saleem, M., Manzoor, S., and Kim, W.Y. (2020). Theoretical Analysis of Roll-Over-Web Surface Thin Layer Coating. Coatings, 10.10.3390/coatings10070691 ↗
73. Manzoor, T., Nazar, K., Zafar, M., Iqbal, S., Ali, M., Kim, W.Y., Saleem, M., and Manzoor, S. (2019). Analysis of a thin layer formation of third-grade fluid. Coatings, 9.10.3390/coatings9110741 ↗
74. MHD mixed convection in an inclined cavity containing adiabatic obstacle and filled with Cu–water nanofluid in the presence of the heat generation and partial slip10.1007/s10973-019-08340-3 ↗
75. Axisymmetric mixed convective stagnation-point flow of a nanofluid over a vertical permeable cylinder by Tiwari-Das nanofluid model10.1016/j.powtec.2016.12.058 ↗
76. Magnetohydrodynamic natural convection flow on a sphere with uniform heat flux in presence of heat generation10.1007/s00707-006-0373-0 ↗
77. Numerical solutions of partial differential equations
78. An asymptotic outer solution applied to the Keller box method10.1016/0021-9991(81)90219-9 ↗
79. Cebeci, T., and Bradshaw, P. (2012). Physical and Computational Aspects of Convective Heat Transfer, Springer Science & Business Media.
80. Molybdenum disulfide nanoparticles suspended in water-based nanofluids with mixed convection and flow inside a channel filled with saturated porous medium10.1063/1.4965162 ↗
81. Laminar separation10.1146/annurev.fl.01.010169.000401 ↗
82. Development and separation of a laminar boundary layer with an exponentially increasing pressure gradient10.1093/qjmam/34.3.383 ↗
83. The structure of two-dimensional separation10.1017/S0022112090003317 ↗
84. Boundary-layer separation on a sphere in a rotating flow10.1017/S0022112071000168 ↗