Microstructure and Oxidation Behavior of Anti-Oxidation Coatings on Mo-Based Alloys through HAPC Process: A Review
Source abstract
Abstract
Mo and Mo-based alloys are important aerospace materials with excellent high temperature mechanical properties. However, their oxidation resistance is very poor at high temperature, and the formation of volatile MoO3 will lead to catastrophic oxidation failure of molybdenum alloy components. Extensive research on the poor oxidation problem has indicated that the halide activated pack cementation (HAPC) technology is an ideal method to solve the problem. In this work, the microstructure, oxide growth mechanism, oxidation characteristics, and oxidation mechanism of the HAPC coatings were summarized and analyzed. In addition, the merits and demerits of HPAC techniques are critically examined and the future scope of research in the domain is outlined.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Metallurgical Engineering, Anhui University of Technology, Maanshan 243002, China
Funding
National Natural Science Foundation of China
References (52)
Show source-provided references
1. Hot deformation behaviour of Mo-TZM and understanding the restoration processes involved10.1016/j.actamat.2018.10.037 ↗
2. Production and characterization of TZM based TiC or ZrC reinforced composites prepared by spark plasma sintering (SPS)10.1016/j.jallcom.2018.11.383 ↗
3. Preparation of TZM alloy by aluminothermic smelting and its characterization10.1016/j.jallcom.2004.09.055 ↗
4. A study on preparation of Mo-30W alloy by aluminothermic co-reduction of mixed oxides10.1016/j.jallcom.2004.10.053 ↗
5. Ultra-high temperature oxidation behavior of micro-laminated ZrC/MoSi2 coating on C/C composite10.1016/j.corsci.2017.12.034 ↗
6. Cui, K.K., Fu, T., Zhang, Y.Y., Wang, J., Mao, H.B., and Tan, T.B. (2021). Microstructure and mechanical properties of CaAl12O19 reinforced Al2O3-Cr2O3 composites. J. Eur. Ceram. Soc., in press.10.1016/j.jeurceramsoc.2021.08.024 ↗
7. Reductive-annealing-induced changes in Mo valence states on the surfaces of MoO3 single crystals and their high temperature transport10.1016/j.cap.2019.09.001 ↗
8. Rodrigues, Oxidation state of Mo affects dissolution and visible-light photocatalytic activity of MoO3 nanostructures10.1016/j.jcat.2019.11.035 ↗
9. Oxidation and volatilization of TZM alloy in air10.1016/S0022-3115(00)00303-2 ↗
10. A study of hot deformation behavior and microstructural characterization of Mo-TZM alloy10.1016/j.jnucmat.2008.12.049 ↗
11. Effect of hot-dip siliconizing time on phase composition and microstructure of Mo-MoSi2 high temperature structural materials10.1016/j.ceramint.2018.12.018 ↗
12. Microstructure and mechanical properties of MoSi2 coating deposited on Mo substrate by hot dipping processes10.1166/jno.2019.2676 ↗
13. Cui, K., Zhang, Y., Fu, T., Hussain, S., Algarni, T.S., Wang, J., Zhang, X., and Ali, S. (2021). Effects of Cr2O3 Content on Microstructure and Mechanical Properties of Al2O3 Matrix Composites. Coatings, 11.10.3390/coatings11020234 ↗
14. Deposition and oxidation behaviour of molybdenum disilicide coating on Nb based alloys substrate by combined AIP/HAPC processes10.1016/j.ceramint.2019.02.115 ↗
15. Fracture resistance of hierarchical Cu-Mo nanocomposite thin films10.1016/j.msea.2020.139891 ↗
16. Formation of MoSi2 and Si/MoSi2 coatings on TZM (Mo-0.5Ti-0.1Zr-0.02C) alloy by hot dip silicon-plating method10.1016/j.ceramint.2021.05.020 ↗
17. Structural identification of phases in Mo–Re alloys within the range from 5 to 95% Re10.1016/S0924-0136(03)00342-X ↗
18. The role of Re in improving the oxidation-resistance of a Re modified Pt-Al coating on Mo-rich single crystal superalloy10.1016/j.jmst.2020.03.054 ↗
19. Effect of hot dip silicon-plating temperature on microstructure characteristics of silicide coating on tungsten substrate10.1016/j.ceramint.2019.10.270 ↗
20. Investigation of morphology and texture properties of WSi2 coatings on W substrate based on contact-mode AFM and EBSD10.1016/j.surfcoat.2020.125966 ↗
21. Microstructure and oxidation behavior of Si-MoSi2 functionally graded coating on Mo substrate10.1016/j.ceramint.2017.02.024 ↗
22. Synthesis WSi2 coating on W substrate by HDS method with various deposition times10.1016/j.apsusc.2020.145551 ↗
23. Evolution of surface morphology, roughness and texture of tungsten disilicide coatings on tungsten substrate10.1016/j.vacuum.2021.110297 ↗
24. Oxidation protection of tungsten alloys for nuclear fusion applications: A comprehensive review10.1016/j.jallcom.2021.161057 ↗
25. Densification and grain growth during isothermal sintering of Mo and mechanically alloyed Mo-TZM10.1016/j.actamat.2009.05.013 ↗
26. Stress design of a laminated MoSi2/Cr coating under particle impact and high temperature environment10.1016/j.ceramint.2020.01.076 ↗
27. Microstructure evolution and oxidation behavior of B modified MoSi2 coating on Nb-Si based alloys10.1016/j.corsci.2015.12.003 ↗
28. Different oxidation protection mechanisms of HAPC silicide coating on niobium alloy over a large temperature range10.1016/j.jallcom.2019.03.229 ↗
29. In-situ synthesis of MoSi2 coating on Mo substrate under carbon protection and its short-term oxidation behavior10.1016/j.surfcoat.2018.09.044 ↗
30. Effect of filler on the oxidation protective ability of MoSi2 coating for Mo substrate by halide activated pack cementation10.1016/j.matdes.2015.12.079 ↗
31. Formation of B-modified MoSi2 coating on pure Mo prepared through HAPC process10.1016/j.ijrmhm.2014.03.003 ↗
32. Preparation and characterization of MoSi2/MoB composite coating on Mo substrate10.1016/j.jallcom.2013.12.023 ↗
33. Effects of Y2O3/Y on Si-B co-deposition coating prepared through HAPC method on pure molybdenum10.1016/S1002-0721(16)60120-5 ↗
34. Development of silicide coating over molybdenum based refractory alloy and its characterization10.1016/j.jnucmat.2010.06.014 ↗
35. Formation of MoSi2 and Al doped MoSi2 coatings on molybdenum base TZM (Mo-0.5Ti-0.1Zr-0.02C) alloy10.1016/j.surfcoat.2012.01.062 ↗
36. Development of Mo(Si,Al)2-MoB composite coatings to protect TZM alloy against oxidation at 1400 °C10.1016/j.intermet.2017.12.002 ↗
37. Oxidation behavior of MoSi2 and Mo(Si, Al)2 coated Mo-0.5Ti-0.1Zr-0.02C alloy10.1016/j.intermet.2010.12.002 ↗
38. Studies on the development of protective coating on TZM alloy and its subsequent characterization10.1016/j.jmatprotec.2007.12.075 ↗
39. Microstructure and wear properties of silicide based coatings over Mo-30W alloy10.1016/j.ijrmhm.2014.01.013 ↗
40. In situ chemical vapour co-deposition of Al and Si to form diffusion coatings on TZM10.1016/j.msea.2008.03.020 ↗
41. Development of oxidation resistant coatings on Mo–30W alloy10.1016/j.ijrmhm.2008.01.005 ↗
42. Oxidation behavior of pack-cemented Si-B oxidation protection coatings for Mo-Si-B alloys at 1300 °C10.1016/j.surfcoat.2015.02.015 ↗
43. Studies on growth mechanism of intermediate layer of (Mo,W)5Si3 and interdiffusion in the (Mo,W)-(Mo,W)Si2 system prepared by pack cementation coating10.1016/j.surfin.2020.100458 ↗
44. High temperature oxidation of Mo-Si-B alloys: Effect of low and very low oxygen partial pressures10.1016/j.actamat.2010.07.034 ↗
45. The structural, mechanical and thermodynamic properties of the orthorhombic TMAl (TM=Ti, Y, Zr and Hf) aluminides from first-principles calculations10.1016/j.vacuum.2020.109742 ↗
46. The hydrogenation mechanism of PtAl and IrAl thermal barrier coatings from first-principles investigations10.1016/j.ijhydene.2020.04.290 ↗
47. Zhang, X., Fu, T., Cui, K., Zhang, Y., Shen, F., Wang, J., Yu, L., and Mao, H. (2021). Coatings The Protection, Challenge, and Prospect of Anti-Oxidation Coating on the Surface of Niobium Alloy. Coatings, 11.10.3390/coatings11070742 ↗
48. Microstructure and oxidation behavior of Mo-Si-Al coating on Nb-based alloy10.1016/j.jallcom.2017.11.339 ↗
49. CALPHAD-type modeling of the C–Hf–Mo system over the whole composition and temperature ranges10.1016/j.tca.2020.178716 ↗
50. Comparison of two kinds of Si-B-Y co-deposition coatings on an Nb-Ti-Si based alloy by pack cementation method10.1016/j.surfcoat.2017.07.013 ↗
51. Oxidation behaviour of the Mo-Si-B and Mo-Si-B-Al alloys in the temperature range of 700–1300 °C10.1016/j.intermet.2007.02.012 ↗
52. Structure and oxidation behavior of Si-Y co-deposition coatings on an Nb silicide based ultrahigh temperature alloy prepared by pack cementation technique10.1016/j.surfcoat.2009.07.031 ↗