Microstructure and Inertial Characteristics of MHD Suspended SWCNTs and MWCNTs Based Maxwell Nanofluid Flow with Bio-Convection and Entropy Generation Past a Permeable Vertical Cone
Source abstract
Abstract
In this research work, our goal is to scrutinize the case, where water-based nanofluids having single-wall and multi-wall carbon nanotubes (CNTs) flow through a vertical cone. The second law of thermodynamic is taken for the aim of scheming effective heat storage units. The body package is layered in convective heat and diluted permeable medium. The effects of Joule heating, rotary microorganisms, heat generation/absorption, chemical reactions, and heat radiation increase the novelty of the established model. By using a local similarity transformation technique, the partial differential equations (PDEs) change into a coupled differential equation. By using the numerical technique, bvp4c, to get the solution of the conservation equations and their relevant boundary conditions. The parameters appearing in the distribution analysis of the alliance are scrutinized in detail, and the consequences are depicted graphically. It can be perceived that in the situation of composed nanotubes, the velocity of fluid decreases as the magnetic field is increased.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanofluid Flow and Heat Transfer · Heat Transfer and Optimization · Heat Transfer Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mathematics, University of Lakki Marwat, Lakki Marwat 28420, Pakistan
Department of Mathematics, Faculty of Science, King Abdulaziz University, P. O. Box 80203, Jeddah 21589, Saudi Arabia
Department of Mathematics, Abdul Wali Khan University, Mardan 23200, Pakistan
Department of Mathematics and Social Sciences, Sukkur IBA University, Sukkur 65200, Pakistan
References (22)
Show source-provided references
1. Choi, S.U., and Eastman, J.A. (1995). Enhancing Thermal Conductivity of Fluids with Nanoparticles, Argonne National Lab.
2. Reduced graphene oxide dispersed nanofluids with improved photo-thermal conversion performance for direct absorption solar collectors10.1016/j.solmat.2017.01.024 ↗
3. Convective heat transfer of Titania nanofluids of different base fluids in cylindrical annulus with discrete heat source10.1002/htj.21375 ↗
4. Numerical modeling of the hydrodynamic stability in vertical annulus with heat source of different lengths
5. Sheikholeslami, M., Shah, Z., Shafee, A., Khan, I., and Tlili, T. (2019). Uniform magnetic force impact on water based nanofluid thermal behavior in a porous enclosure with ellipse shaped obstacle. Sci. Rep., 1196.10.1038/s41598-018-37964-y ↗
6. Heat Transfer enhancements of low volume concentration CNT/water nanofluid and wire coil inserts in a circular tube10.1016/j.egypro.2016.11.223 ↗
7. Thermal design exploration of a swirl flow microchannel heat sink for high heat flux applications based on numerical simulations10.1016/j.applthermaleng.2016.08.054 ↗
8. Heat transfer of aqueous suspensions of carbon nanotubes (CNT nanofluids)10.1016/j.ijheatmasstransfer.2005.07.009 ↗
9. Free convection with uniform suction or injection from a vertical cone for constant wall heat flux10.1016/0735-1933(92)90038-J ↗
10. Modelling unsteady mixed convection of a nanofluid suspended with multiple kinds of nanoparticles between two rotating disks by generalized hybrid model10.1016/j.icheatmasstransfer.2019.104275 ↗
11. Rohsenow, W.M., Hartnett, J.P., and Cho, Y.I. (1985). Handbook of Heat Transfer, McGraw-Hill Book Co.
12. Estimation of heat transfer coefficient and friction factor in the transition flow with low volume concentration of Al2O3 nano fluid flowing in a circular tube and with wisted tape insert10.1016/j.icheatmasstransfer.2009.02.011 ↗
13. Modified computational methods using effective heat capacity model for the thermal evaluation of PCM outfitted walls10.1016/j.icheatmasstransfer.2019.104278 ↗
14. Experimental observations on the heat transfer enhancement caused by natural convection during melting of solid–liquid 17 phase change materials (PCMs)10.1016/j.apenergy.2015.03.078 ↗
15. Viscosity and thermal conductivity of nanofluids containing carbon nanotubes stabilized by Chitosan10.1016/j.ijthermalsci.2010.09.008 ↗
16. Enhanced thermal conductivity of ethylene glycol with single-walled carbon nanotube inclusions10.1016/j.ijheatmasstransfer.2012.03.001 ↗
17. Interaction of magnetic field in flow of Maxwell nanofluid with convective effect10.1016/j.jmmm.2015.04.019 ↗
18. A study of entropy generation in fundamentsl convective heat transfer10.1115/1.3451063 ↗
19. The shape effects of nanoparticles suspended in HFE-7100 over wedge with entropy generation and mixed convection10.1007/s13204-015-0481-z ↗
20. Heat transfer and turbulent simulation of nanomaterial due to compound turbulator including irreversibility analysis10.1016/j.ijheatmasstransfer.2019.04.030 ↗
21. Magnetized suspended carbon nanotubes based nanofluid flow with bio-convection and entropy generation past a vertical cone10.1038/s41598-019-48645-9 ↗
22. Reforming of methanol with steam in a micro-reactor with Cu–SiO2 porous catalyst10.1016/j.ijhydene.2019.05.215 ↗