journal article·2021-09-21Open access

Rare Earth Elements Enhanced the Oxidation Resistance of Mo-Si-Based Alloys for High Temperature Application: A Review

Laihao Yu, Yingyi Zhang, Tao Fu, Jie Wang, Kunkun Cui, Fuqiang Shen

Coatings· Volume 11· Issue 9

Abstract

Traditional refractory materials such as nickel-based superalloys have been gradually unable to meet the performance requirements of advanced materials. The Mo-Si-based alloy, as a new type of high temperature structural material, has entered the vision of researchers due to its charming high temperature performance characteristics. However, its easy oxidation and even “pesting oxidation” at medium temperatures limit its further applications. In order to solve this problem, researchers have conducted large numbers of experiments and made breakthrough achievements. Based on these research results, the effects of rare earth elements like La, Hf, Ce and Y on the microstructure and oxidation behavior of Mo-Si-based alloys were systematically reviewed in the current work. Meanwhile, this paper also provided an analysis about the strengthening mechanism of rare earth elements on the oxidation behavior for Mo-Si-based alloys after discussing the oxidation process. It is shown that adding rare earth elements, on the one hand, can optimize the microstructure of the alloy, thus promoting the rapid formation of protective SiO2 scale. On the other hand, it can act as a diffusion barrier by producing stable rare earth oxides or additional protective films, which significantly enhances the oxidation resistance of the alloy. Furthermore, the research focus about the oxidation protection of Mo-Si-based alloys in the future was prospected to expand the application field.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Metallurgical Engineering, Anhui University of Technology, Maanshan 243002, China

Funding

National Natural Science Foundation of China

References (100+)

Show source-provided references
1. Pyrometallurgical recovery of zinc and valuable metals from electric arc furnace dust—A review10.1016/j.jclepro.2021.126788 ↗
2. Effect of Ti (Macro-) alloying on the high-temperature oxidation behavior of ternary Mo-Si-B alloys at 820–1300 °C10.1007/s11085-013-9375-1 ↗
3. In situ nanomechanical testing in focused ion beam and scanning electron microscopes10.1063/1.3595423 ↗
4. Overview on established and novel FIB based miniaturized mechanical testing using in-situ SEM10.3139/146.110149 ↗
5. Effects of indenter angle on micro-scale fracture toughness measurement by pillar splitting10.1111/jace.15093 ↗
6. A review of experimental approaches to fracture toughness evaluation at the micro-scale10.1016/j.matdes.2019.107762 ↗
7. The brittle-ductile transition of tungsten single crystals at the micro-scale10.1016/j.matdes.2018.04.009 ↗
8. Mo-Si-B alloys for ultrahigh-temperature structural applications10.1002/adma.201200764 ↗
9. The hotter the engine, the better10.1126/science.1179327 ↗
10. Oxidation response of additively manufactured eutectic Mo-Si-B alloys10.1088/1757-899X/882/1/012002 ↗
11. Oxidation behavior of a Mo(Si,Al)2 composite at 900–1600 °C in dry air10.1007/s10853-012-6906-0 ↗
12. Mechanical behavior of MoSi2 and MoSi2 composites10.1016/0921-5093(94)03246-7 ↗
13. Microstructure and properties of MoSi2-MoB and MoSi2-Mo5Si3 molybdenum silicides10.1016/S0921-5093(02)00193-4 ↗
14. Oxidation behavior of Moss-Ti5Si3-T2 composites at intermediate and high temperatures10.1016/j.intermet.2020.106702 ↗
15. A comparative overview of molybdenum disilicide composites10.1016/0921-5093(92)90308-N ↗
16. Toughening of MoSi2 doped by La2O3 particles10.1016/S0921-5093(02)00455-0 ↗
17. Improvement of oxidation resistance of a Mo-62Si-5B (at.%) alloy at 1250 °C and 1350 °C via an in situ pre-formed SiO2 fabricated by spark plasma sintering10.1016/j.corsci.2017.08.019 ↗
18. Effect of hot-dip siliconizing time on phase composition and microstructure of Mo-MoSi2 high temperature structural materials10.1016/j.ceramint.2018.12.018 ↗
19. Evolution kinetics and microstructure of MoSi2 and Mo5Si3 surface layers on two-phase Mo-9Si-18B alloy during pack-cementation and high-temperature oxidation10.1016/j.intermet.2003.12.009 ↗
20. On the formation of interfacial and internal voids in a-Al2O3 scales10.1007/BF01670505 ↗
21. Oxidation behaviour of particle reinforced MoSi2 composites at temperatures up to 1700 °C. Part II: Initial screening of the oxidation behaviour of MoSi2 composites10.1002/maco.200403832 ↗
22. Oxidation behaviour of particle reinforced MoSi2 composites at temperatures up to 1700 °C. Part III: Oxidation behaviour of optimised MoSi2 composites10.1002/maco.200403833 ↗
23. Direct evidence for oxygen stabilization of icosahedral phase during crystallization of Zr65Cu27.5Al7.5 metallic glass10.1063/1.125654 ↗
24. Microstructure and oxidation behavior of Si-MoSi2 functionally graded coating on Mo substrate10.1016/j.ceramint.2017.02.024 ↗
25. Effect of hot dip silicon-plating temperature on microstructure characteristics of silicide coating on tungsten substrate10.1016/j.ceramint.2019.10.270 ↗
26. Toughening strategies for MoSi2-based high temperature structural silicides10.1016/S0966-9795(00)00044-3 ↗
27. Influence of minor Fe addition on the oxidation performance of Mo-Si-B alloys10.1016/j.scriptamat.2012.08.019 ↗
28. Oxidation behavior of Mo-Si-B-(X) alloys: Macro- and microalloying (X = Cr, Zr, La2O3), JOM: The journal of the Minerals10.1007/s11837-011-0203-2 ↗
29. Oxidation behavior of Mo-Si-B alloys in wet air10.1016/j.msea.2003.12.025 ↗
30. Processing of molybdenum disilicide10.1007/BF00356804 ↗
31. Hardness and toughness of MoSi2 and MoSi2-SiC composite prepared by reactive sintering of powders10.1016/S0921-5093(98)00517-6 ↗
32. A study of the combustion synthesis of MoSi2 and MoSi2-matrix composites10.1007/BF00356442 ↗
33. MoSi2 laser cladding-a comparison between two experimental procedures: Mo-Si online combination and direct use of MoSi210.1016/S0030-3992(01)00060-3 ↗
34. Fu, T., Cui, K.K., Zhang, Y.Y., Wang, J., Zhang, X., Shen, F.Q., Yu, L.H., and Mao, H.B. (2021). Microstructure and oxidation behavior of antioxidation coatings on Mo-based alloys through HAPC process: A review. Coatings, 11.10.3390/coatings11080883 ↗
35. Microstructure and oxidation resistance of laser-remelted Mo-Si-B alloy10.1016/j.scriptamat.2007.01.025 ↗
36. Laser surface sealing and strengthening of zirconia coatings10.1016/0257-8972(91)90031-Q ↗
37. Synthesis WSi2 coating on W substrate by HDS method with various deposition times10.1016/j.apsusc.2020.145551 ↗
38. Evolution of surface morphology, roughness and texture of tungsten disilicide coatings on tungsten substrate10.1016/j.vacuum.2021.110297 ↗
39. Cui, K.K., Fu, T., Zhang, Y.Y., Wang, J., Mao, H.B., and Tan, T.B. (2021). Microstructure and mechanical properties of CaAl12O19 reinforced Al2O3-Cr2O3 composites. J. Eur. Ceram. Soc.10.1016/j.jeurceramsoc.2021.08.024 ↗
40. Novel class of nanostructured metallic glass films with superior and tunable mechanical properties10.1016/j.actamat.2021.116955 ↗
41. Thermomechanical properties of amorphous metallic tungsten-oxygen and tungsten-oxide coatings10.1016/j.matdes.2018.107565 ↗
42. The effect of reactive element additions on the selective oxidation, growth and adhesion of chromia scales10.1016/0921-5093(95)09798-8 ↗
43. Mechanically alloyed Mo-Si-B alloys with a continuous α-Mo matrix and improved mechanical properties10.1016/j.intermet.2008.04.015 ↗
44. The influence of the reactive element yttrium on the stress in alumina scales formed by oxidation10.1016/S1359-6454(96)00258-3 ↗
45. Effects of Re- and Al-alloying on mechanical properties and high-temperature oxidation of MoSi210.1016/j.jallcom.2011.12.082 ↗
46. Re effects on phase stability and mechanical properties of MoSS+Mo3Si+Mo5SiB2 alloys10.1016/j.jallcom.2012.12.047 ↗
47. Rare earth effects on adhesion of Cr2O3 oxide scale formed on surface of Co–40Cr alloy
48. Effect of surface-applied rare earth containing thin oxide film on high-temperature oxidation of Fe25Cr
49. Investigation of morphology and texture properties of WSi2 coatings on W substrate based on contact-mode AFM and EBSD10.1016/j.surfcoat.2020.125966 ↗
50. Zhang, X., Fu, T., Cui, K.K., Zhang, Y.Y., Shen, F.Q., Wang, J., Yu, L.H., and Mao, H.B. (2021). The protection, challenge, and prospect of anti-oxidation coating on the surface of niobium alloy. Coatings, 11.10.3390/coatings11070742 ↗
51. Formation of MoSi2 and Si/MoSi2 coatings on TZM (Mo-0.5Ti-0.1Zr-0.02C) alloy by hot dip silicon-plating method10.1016/j.ceramint.2021.05.020 ↗
52. Microstructure and mechanical properties of MoSi2 coating deposited on Mo substrate by hot dipping processes10.1166/jno.2019.2676 ↗
53. The oxidation behavior of oxide-dispersed β-NiAl: I. short-term performance at 1200 °C10.1023/A:1018894711276 ↗
54. The effect of lanthanum on the scales developed on thin foils of Fe20Cr5Al at very high temperatures10.1023/A:1018891211160 ↗
55. Oxidation protection of tungsten alloys for nuclear fusion applications: A comprehensive review10.1016/j.jallcom.2021.161057 ↗
56. Experimental observations in support of the dynamic-segregation theory to explain the reactive element effect10.1007/BF01046818 ↗
57. Effect of reactive element oxide inclusions on the growth kinetics of protective oxide scales10.1016/j.actamat.2007.07.007 ↗
58. Oxidation behavior of Mo-Si-B alloys at medium-to-high temperatures10.1016/j.jmst.2020.06.004 ↗
59. A study on effect of reactive and rare earth element additions on the oxidation behavior of Mo-Si-B system10.1007/s11085-013-9374-2 ↗
60. Oxidation mechanisms of lanthanum-alloyed Mo-Si-B10.1016/j.corsci.2014.07.058 ↗
61. Improvement in properties: Additives in oxidation resistance
62. Modelling the influence of reactive elements on the work of adhesion between a thermally grown oxide and a bond coat alloy10.1002/maco.200503928 ↗
63. Correlation between the microstructure, growth mechanism, and growth kinetics of alumina scales on a FeCrAlY alloy10.1007/s11661-007-9342-z ↗
64. Oxidation behavior of extruded Mo5Si3Bx–MoSi2–MoB intermetallics from 600°–1600 °C10.1016/S0966-9795(02)00034-1 ↗
65. Oxidation behavior of Mo-12.5Si-25B alloy at high temperature10.1016/j.jallcom.2007.04.269 ↗
66. Oxidation behavior of Mo5SiB2-based alloy at elevated temperatures10.1016/S0966-9795(02)00013-4 ↗
67. Microstructure, microhardness and oxidation behavior of Mo-Si-B alloys in the Moss+Mo2B+Mo5SiB2 three phase region10.1016/j.intermet.2019.106618 ↗
68. Effect of Si/B ratio on the microstructure and mechanical properties of lanthanum oxide-doped Mo-Si-B alloys10.1016/j.jallcom.2013.04.116 ↗
69. Efect of moist air and minor Zr addition on oxidation behavior of arc-melted multiphase Mo-Si-B alloys in the temperature range of 1000 °C–1300 °C10.1007/s11085-020-09968-5 ↗
70. Effect of oxygen partial pressure on the cyclic oxidation behavior of Mo76Si14B1010.1007/s11661-013-1756-1 ↗
71. Effects of the lanthanum content on the microstructure and properties of the molybdenum alloy10.1016/j.ijrmhm.2016.09.012 ↗
72. Microstructure and mechanical properties of lanthanum oxide-doped Mo-12Si-8.5B (at.%) alloys10.1016/j.jallcom.2013.04.116 ↗
73. Effects of lanthanum oxide content on mechanical properties of mechanical alloying Mo-12Si-8.5B (at.%) alloys10.1016/j.ijrmhm.2013.07.011 ↗
74. Room temperature mechanical properties and high temperature oxidation behavior of MoSi2 matrix composite reinforced by adding La2O3 and Mo5Si310.1016/j.matchar.2008.11.017 ↗
75. Ambient to high temperature fracture toughness and fatigue-crack propagation behavior in a Mo-12Si-8.5B (at.%) intermetallic10.1016/S0966-9795(01)00008-5 ↗
76. Processing and mechanical properties of a molybdenum silicide with the composition Mo-12Si-8.5B (at.%)10.1016/S0966-9795(00)00093-5 ↗
77. Bimodal α-Mo grain structure inducing excellent oxidation resistance in Mo-12Si-8.5B alloy at 1100 °C10.1016/j.ijrmhm.2021.105533 ↗
78. Enhanced oxidation resistance of Mo-12Si-8.5B alloys with ZrB2 addition at 1300 °C10.1016/j.jmst.2017.09.010 ↗
79. Unprecedented oxidation resistance at 900 °C of Mo-Si-B composite with addition of ZrB210.1016/j.ceramint.2020.02.264 ↗
80. Microstructure and oxidation resistance behavior of lanthanum oxide-doped Mo-12Si-8.5B alloys10.1016/j.ijrmhm.2011.06.003 ↗
81. Microstructure and oxidation behavior of directionally solidified Mo-Mo5SiB2 (T2)-Mo3Si alloys10.1016/j.jallcom.2007.08.064 ↗
82. Oxidation behavior of multiphase Mo5SiB2 (T2)-based alloys at high temperatures10.1016/S1003-6326(07)60256-8 ↗
83. Volume and size effects of intermetallic compounds on the high-temperature oxidation behavior of Mo-Si-B alloys10.1016/j.ijrmhm.2019.02.008 ↗
84. Constitution, oxidation and creep of eutectic and eutectoid Mo-Si-Ti alloys10.1016/j.intermet.2018.10.028 ↗
85. Effects of microstructure on the oxidation behavior of multiphase Mo-Si-B alloys10.1016/S0921-5093(02)00446-X ↗
86. Oxidation behavior of Mo-Si-B in-situ composites10.4028/www.scientific.net/SSP.127.215 ↗
87. Oxidation performance of Mo3Si with Al additions10.1016/j.corsci.2008.12.004 ↗
88. Temperature oxidation of mechanically alloyed Mo-Si-B alloys
89. High-temperature oxidation performance of Mo-Si-B alloys: Current results. developments and opportunities10.4028/www.scientific.net/AMR.278.587 ↗
90. Molybdenum alloys for high temperature applications in air10.1179/174329008X313379 ↗
91. High-temperature oxidation III. Zirconium and hafnium diborides10.1149/1.2424154 ↗
92. Oxidation of MoSi2-based composites10.1016/0921-5093(92)90325-U ↗
93. Effects of Ti, Zr, and Hf on the phase stability of Mo_ss + Mo3Si + Mo5SiB2 alloys at 1600 °C10.1016/j.actamat.2009.09.032 ↗
94. Self-propagating high-temperature synthesis of advanced ceramics MoSi2-HfB2-MoB10.1016/j.ceramint.2018.09.138 ↗
95. Fabrication and properties of HfB2-MoSi2 composites produced by hot pressing and spark plasma sintering10.1557/jmr.2006.0180 ↗
96. High-temperature oxidation and plasma torch testing of MoSi2-HfB2-MoB ceramics with single-level and two-level structure10.1016/j.corsci.2019.07.001 ↗
97. Oxidation behaviour of a pressureless sintered HfB2-MoSi2 composite10.1016/j.jeurceramsoc.2008.09.018 ↗
98. A model for the oxidation of ZrB2, HfB2 and TiB210.1016/j.actamat.2007.07.027 ↗
99. Effect of Zr addition on microstructure, hardness and oxidation behavior of arc-melted and spark plasma sintered multiphase Mo-Si-B alloys10.1007/s11661-019-05111-5 ↗
100. Anti-oxidation properties of a BN/SiC/Si3N4-ZrO2-SiO2 multilayer coating for carbon/carbon composites10.1016/j.surfcoat.2015.06.072 ↗