Effects of the Shot Peening Process on Corrosion Resistance of Aluminum Alloy: A Review
Source abstract
Abstract
The high humidity of marine atmosphere and the existence of corrosive chloride ions lead to the premature corrosion failure of aluminum alloy components. The development of surface-strengthening technology provides an opportunity to prolong their service life spans. As a mature surface-strengthening technology, the shot peening process is widely used, owing to its advantages over other strengthening technologies, including its easy operation and high production rate. The shot-peened surface integrity depends on shot peening variables that introduces the thermomechanical effect to the deformed surface layer. When the inappropriate shot peening parameters are adopted, the shot-peened surface integrity could be deteriorated, which further weakens the corrosion performance of the surface. Therefore, it is essential to optimize shot peening process variables with the consideration of the material and its application. In this paper, the strengthening mechanism of the shot peening process was firstly elaborated, and then the effects of process parameters on the surface integrity of aluminum alloy were reviewed. The relationship between the surface integrity and corrosion resistance was also revealed. Two directions, including the application of the surface temperature rise during the shot peening process and the shot-peened surface roughening, are proposed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, University of Jinan, Jinan 250022, China
Shandong Kaitai Shot Blasting Machinery Co., Ltd., Binzhou 256217, China
Shandong Measurement and Testing Center, Jinan 250014, China
Funding
Shandong Higher Education Youth Innovation and Technology Support Program · Natural Science Foundation of Shandong Province · Independent Innovation Team Foundation of Jinan
References (84)
Show source-provided references
1. Machining of aluminum alloys: A review10.1007/s00170-016-8431-9 ↗
2. Aluminium in innovative light-weight car design10.2320/matertrans.L-MZ201132 ↗
3. Residual stress relief in the aluminium alloy 707510.1080/02670836.2017.1318243 ↗
4. Development of a super-hydrophobic and bactericide organic topcoat to be applied on thermally sprayed aluminum coatings in offshore submerged components10.1016/j.porgcoat.2019.105376 ↗
5. A review on anodizing of aerospace aluminum alloys for corrosion protection10.3390/coatings10111106 ↗
6. Current status and prospect of corrosion protection technology for aluminum alloy ships
7. Fracture analysis of steam huff and puff pipeline in a well in Bohai Sea
8. Influence of environmental factors on corrosion of ship structures in marine atmosphere10.1016/j.corsci.2009.05.028 ↗
9. Research Progress on Corrosion Fatigue of Aerospace Aluminum Alloy
10. Anticorrosion property enhancement of Al–Li alloy 2A97 by lowering machined surface roughness10.1002/maco.202011846 ↗
11. Research Progress on the Influence of Machining Surface Quality on corrosion Resistance
12. Bhat, K.U., Panemangalore, D.B., Kuruveri, S.B., John, M., and Menezes, P.L. (2022). Surface Modification of 6xxx Series Aluminum Alloys. Coatings, 12.10.3390/coatings12020180 ↗
13. Improvement of abrasion resistance in artificial seawater and corrosion resistance in NaCl solution of 7075 aluminum alloy processed by laser shock peening10.1016/j.optlaseng.2016.10.016 ↗
14. Research Status and Prospect of Surface Strengthening Technology for Automotive Parts
15. Effect of shot peening on fatigue properties of pre-corroded aluminum alloy
16. Meyer, D., Hettig, M., and Mensching, N. (2021). Pulsed Mechanical Surface Treatment—An Approach to Combine the Advantages of Shot Peening, Deep Rolling, and Machine Hammer Peening. J. Manuf. Mater. Process., 5.10.3390/jmmp5030098 ↗
17. Vibration-Assisted Ball Burnishing10.3390/encyclopedia1020038 ↗
18. Maamoun, A.H., Elbestawi, M.A., and Veldhuis, S.C. (2018). Influence of Shot Peening on AlSi10Mg Parts Fabricated by Additive Manufacturing. J. Manuf. Mater. Process., 2.10.3390/jmmp2030040 ↗
19. Lei, C., Chen, X., Li, Y., Chen, Y., and Yang, B. (2019). Enhanced Corrosion Resistance of SA106B Low-Carbon Steel Fabricated by Rotationally Accelerated Shot Peening. Metals, 9.10.3390/met9080872 ↗
20. Enhanced corrosion resistance of the surface modified Ti-13Nb-13Zr alloy by ultrasonic shot peening10.1016/j.corsci.2021.109597 ↗
21. A review on the application of peening processes for surface treatment10.1088/1757-899X/114/1/012002 ↗
22. Finite Element Simulation of residual stress field of 2024 Aluminum Alloy after random multi-shot peening
23. Review on Shot Peening Strengthening Mechanism of Metallic Materials
24. Thermal stability of residual stresses and work hardening of shot peened tungsten cemented carbide10.1016/j.jmatprotec.2016.09.013 ↗
25. On the shot peening surface coverage and its assessment by means of finite element simulation: A critical review and some original developments10.1016/j.apsusc.2012.07.017 ↗
26. Investigation on the effect of shot peening coverage on the surface integrity10.1016/j.apsusc.2019.05.281 ↗
27. Effects of severe shot peening on the surface state of AW 7075 Al alloy
28. John, M., Kalvala, P.R., Misra, M., and Menezes, P.L. (2021). Peening techniques for surface modification: Processes, properties, and applications. Materials, 14.10.3390/ma14143841 ↗
29. Surface hardening of aluminum alloy by shot peening treatment with Zn based ball10.1016/j.msea.2012.02.043 ↗
30. Effect of shot peening using ultra-fine particles on fatigue properties of 5056 aluminum alloy under rotating bending10.1016/j.msea.2015.11.076 ↗
31. Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years Later10.1007/s11837-016-1820-6 ↗
32. Surface Integrity of Gear and Development Trend of Anti-Fatigue Manufacturing Technology
33. Effect of machining-induced surface integrity on the corrosion behavior of Al–Li alloy 2A97 in sodium chloride solution10.1002/maco.201810380 ↗
34. Comparative Study on Electrochemical Behavior of Al-Li Alloy 2A97 Machined Surfaces in Sodium Chloride Solution10.1109/ACCESS.2019.2941746 ↗
35. Clauer, A.H. (2019). Laser shock peening, the path to production. Metals, 9.10.3390/met9060626 ↗
36. Laser peening process and its impact on materials properties in comparison with shot peening and ultrasonic impact peening10.3390/ma7127925 ↗
37. Relation between roughness and processing conditions of AISI 316L stainless steel treated by ultrasonic shot peening10.1016/j.triboint.2014.07.013 ↗
38. Ding, X., Kang, Y., Li, D., Wang, X.C., and Zeng, D.P. (2017). Experimental investigation on surface quality processed by self-excited oscillation pulsed waterjet peening. Materials, 10.10.3390/ma10090989 ↗
39. Effect of shot peening on corrosion resistance of 6082 aluminum alloy (in Chinese)
40. Enhancing surface layer properties of an aircraft aluminum alloy by shot peening using response surface methodology10.1016/j.matdes.2015.06.065 ↗
41. Experimental investigation and fatigue life prediction for 7475-T7351 aluminum alloy with and without shot peening-induced residual stresses10.1016/j.actamat.2011.03.013 ↗
42. Influence of different shot peening treatments on surface state and fatigue behavior of al 6063 alloy10.1016/j.engfracmech.2017.03.017 ↗
43. Study on hardness and wear resistance of shot peened AA7075-T6 aluminum alloy10.1088/2631-8695/abea0a ↗
44. Role of ultrasonic shot peening on low cycle fatigue behavior of 7075 aluminum alloy10.1016/j.ijfatigue.2017.06.033 ↗
45. Gao, Z., Liao, K., and Chen, J. (2021). Surface Characteristic Function of Al Alloy after Shot Peening. Coatings, 11.10.3390/coatings11020160 ↗
46. Effect of shot peening on surface roughness of 7075 aluminum alloy
47. Residual stress field induced by shot peening based on random-shots for 7075 aluminum alloy10.1016/S1003-6326(12)61717-8 ↗
48. Simulation and Experimental Study on Effect of Shot Peening on Surface Roughness of 7075-T651 Aluminum Alloy
49. Influence of severe shot peening on the surface state and ultra-high-cycle fatigue behavior of an AW 7075 aluminum alloy10.1007/s11665-017-2692-9 ↗
50. Numerical simulation and experiment of shot peening strengthening of al-li alloy
51. Residual stress near single shot peening impingements determined by nanoindentation and numerical simulations10.1007/s10853-014-8792-0 ↗
52. Shot Peening and its Effect on Gearing
53. Influence of ceramic peening on fatigue properties of 2024HDT aluminum alloy
54. Zeng, W., and Yang, J. (2020). Quantitative representation of mechanical behaviour of the surface hardening layer in shot-peened nickel-based superalloy. Materials, 13.10.3390/ma13061437 ↗
55. Comparative Experimental study on different Surface strengthening processes of 7075 Aluminum Alloy
56. Influence of Surface Nanocrystallization and Partial Amorphization Induced by Ultrasonic Shot Peening on Surface Properties of 7075 Aluminum Alloy10.1007/s11665-020-05219-5 ↗
57. Avcu, Y.Y., Gönül, B., Yetik, O., Sönmez, F., Cengiz, A., Guney, M., and Avcu, E. (2021). Modification of Surface and Subsurface Properties of AA1050 Alloy by Shot Peening. Materials, 14.10.3390/ma14216575 ↗
58. Effect of shot peening duration on mechanical properties and microstructure of 5052 al-mg alloy
59. Softening effects induced by shot peening for an aluminum-lithium alloy10.1007/s11661-019-05506-4 ↗
60. Salt Spray Corrosion Resistance of SSM319s Aluminum Alloy with Surface Blast Treatment
61. Effect of Shot peening and Stress Factors on Denudation Behavior of 2E12-T3 Aluminum Alloy
62. Optimization of USSP duration for enhanced corrosion resistance of AA707510.1016/j.ultras.2018.08.011 ↗
63. A comparison of AA2024 and AA7150 subjected to ultrasonic shot peening: Microstructure, surface segregation and corrosion10.1016/j.surfcoat.2018.01.072 ↗
64. Microstructure, corrosion behaviour and thermal stability of AA 7150 after ultrasonic shot peening10.1016/j.surfcoat.2020.126127 ↗
65. Influence of peening on the corrosion properties of AISI 304 stainless steel10.1016/j.corsci.2009.08.008 ↗
66. Shot peening influence on corrosion resistance of AE21 magnesium alloy
67. Effect of rotating shot peening on stress corrosion resistance of 7b04-t6 aluminum alloy
68. Influence of surface treatments on surface layer properties, fatigue and corrosion fatigue performance of AA7075 T7310.1016/j.matdes.2012.04.056 ↗
69. Influence of ultrasonic shot peening on corrosion behavior of 7075 aluminum alloy10.1016/j.jallcom.2017.06.310 ↗
70. Evaluation of corrosion resistance of AA6082-T651 aluminium alloy after laser shock peening by means of cyclic polarisation and ElS methods10.1016/j.corsci.2012.03.019 ↗
71. Influence of shot peening on failure of an aluminum alloy exposed to aggressive aqueous environments10.1007/s11665-012-0450-6 ↗
72. Effect of High Intensity Laser Shock on electrochemical Corrosion Behavior of Plasma Arc Welding joints of 7075 Aluminum Alloy
73. Investigating the effects of bulk and surface severe plastic deformation on the fatigue, corrosion behaviour and corrosion fatigue of AA508310.1016/j.surfcoat.2014.06.026 ↗
74. TEM evaluation of steel nanocrystalline surfaces obtained by severe shot peening10.1016/j.surfcoat.2021.127238 ↗
75. Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys10.1179/026708408X334087 ↗
76. Investigation of ultrafine grained AA1050 fabricated by accumulative roll bonding10.1016/j.msea.2014.07.032 ↗
77. Enhancing the structural performance of lightweight metals by shot peening10.1002/adem.201801140 ↗
78. The effects of ultrasonic peening on chemical corrosion behavior of aluminum 707510.1007/s00170-016-9795-6 ↗
79. Effect of laser shot peening on microstructure and stress corrosion resistance of 2195 Al-Li alloy
80. Improving Corrosion Resistance Properties of Nickel-Aluminum Bronze (NAB) Alloys via Shot Peening Treatment10.2320/matertrans.M2019031 ↗
81. Novel combination of indicators to compare the corrosion behaviors of Al, Al–Li alloy 2A97, and other Al alloys10.1002/maco.202112520 ↗
82. Comparative investigations on the electrochemical behaviors among Al and aluminum alloys10.1088/2053-1591/abc5e0 ↗
83. Surface nanocrystallization of aluminium alloy by controlled ball impact technique10.1016/j.surfcoat.2012.08.069 ↗
84. Literature review of numerical simulation and optimisation of the shot peening process