Effect of Graphene Coating on the Heat Transfer Performance of a Composite Anti-/Deicing Component
Source abstract
Abstract
The thermal conductivity of a graphene coating for anti-/deicing is rarely studied. This paper presents an improved anti-/deicing efficiency method for composite material anti-/deicing by using the heat-transfer characteristic of a graphene coating. An anti-/deicing experiment was conducted using the centrifugal force generated by a helicopter rotor. Results showed that the graphene coating can accelerate the internal heat transfer of the composite material, thereby improving the anti-icing and deicing efficiency of the helicopter rotor. The spraying process parameters, such as coating thickness and spraying pressure, were also studied. Results showed that reducing coating thickness and increasing spraying pressure are beneficial in preparing a graphene coating with high thermal conductivity. This study provides an experimental reference for the application of a graphene coating in anti-/deicing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Graphene research and applications · Surface Modification and Superhydrophobicity · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Virtual Reality Technology, School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China
Funding
Defense Industrial Technology Development Program · State Key Laboratory of Virtual Reality Technology Independent Subject
References (43)
Show source-provided references
1. Helicopter rotor icing protection methods10.4050/JAHS.32.34 ↗
2. Aircraft icing model considering both rime ice property variability and runback water effect10.1016/j.ijheatmasstransfer.2016.08.086 ↗
3. New 3-D ice accretion method of hovering rotor including effects of centrifugal force10.1016/j.ast.2015.10.018 ↗
4. A route towards superhydrophobic graphene surfaces: Surface-treated reduced graphene oxide spheres10.1039/c3ta11434a ↗
5. Fabrication of a superhydrophobic carbon nanotube coating with good reusability and easy repair ability10.1016/j.colsurfa.2013.12.066 ↗
6. Anti-icing performance of superhydrophobic surfaces10.1016/j.apsusc.2011.02.057 ↗
7. Frost formation and anti-icing performance of a hydrophobic coating on aluminum10.1016/j.expthermflusci.2014.09.003 ↗
8. Experimental investigation of viscous drag reduction of superhydrophobic nano-coating in laminar and turbulent flows10.1016/j.expthermflusci.2013.08.003 ↗
9. Durability of a lubricant-infused electrospray silicon rubber surface as an anti-icing coating10.1016/j.apsusc.2015.02.051 ↗
10. Superhydrophobic graphene/nafion nanohybrid films with hierarchical roughness10.1021/jp207818b ↗
11. Buschhorn, S.T., Kessler, S.S., Lachmann, N., Gavin, J., Wardle, B.L., and Thomas, G. (, 2013). Electrothermal icing protection of aerosurfaces using conductive polymer nanocomposites. Proceedings of the 54th AIAA Structures, Structural Dynamics, and Materials (SDM) Conference, Boston, MA, USA.10.2514/6.2013-1729 ↗
12. Recent advances in superhydrophobic nanomaterials and nanoscale systems10.1166/jnn.2014.9194 ↗
13. Numerical simulation of an airfoil electrothermal anti-icing system10.1177/0954410012463525 ↗
14. Surrogate-based optimization of electrothermal wing anti-icing systems10.2514/1.C032072 ↗
15. Ding, L., Chang, S., and Leng, M. (2016, January 10–12). Transient characteristics of an electrothermal anti-icing process based on the improved messinger model. Proceedings of the 2016 IEEE International Conference on Aircraft Utility Systems (AUS), Beijing, China.10.1109/AUS.2016.7748052 ↗
16. Aircraft anti-icing and de-icing techniques and modeling10.2514/3.47027 ↗
17. Numerical simulation and experimental validation of ultrasonic de-icing system for wind turbine blade10.1016/j.apacoust.2016.07.004 ↗
18. Sandorff, P.E. (1985). Beam balancer electro-impulse deicing systems. (4,501,398), U.S. Patent.
19. Electroimpulse deicing—Electrodynamic solution by discrete elements10.2514/3.45801 ↗
20. Measurement of scattering rate and minimum conductivity in graphene10.1103/PhysRevLett.99.246803 ↗
21. Graphene/polyurethane nanocomposites for improved gas barrier and electrical conductivity10.1021/cm100477v ↗
22. Exergy analysis of a shell-and-tube heat exchanger using graphene oxide nanofluids10.1016/j.expthermflusci.2016.12.004 ↗
23. The thermal conductivity-dependant drag reduction mechanism of water droplets controlled by graphene/silicone rubber composites10.1016/j.expthermflusci.2017.03.021 ↗
24. Flexible, transparent single-walled carbon nanotube transistors with graphene electrodes10.1088/0957-4484/21/42/425201 ↗
25. High-performance graphene-based transparent flexible heaters10.1021/nl202311v ↗
26. Self-assembled graphene/carbon nanotube hybrid films for super capacitors10.1021/jz9003137 ↗
27. Carbon-based supercapacitors produced by activation of graphene10.1126/science.1200770 ↗
28. Conductive nanomaterials for printed electronics10.1002/smll.201303000 ↗
29. Rapid and versatile photonic annealing of graphene inks for flexible printed electronics10.1002/adma.201502866 ↗
30. Ammonia generation via a graphene-coated nickel catalyst10.3390/coatings7060072 ↗
31. Atmospheric-pressure plasma jet processed Pt-decorated reduced graphene oxides for counter-electrodes of dye-sensitized solar cells10.3390/coatings6040044 ↗
32. Radio-frequency-transparent, electrically conductive graphene nanoribbon thin films as deicing heating layers10.1021/am404203y ↗
33. Composites of graphene nanoribbon stacks and epoxy for joule heating and deicing of surfaces10.1021/acsami.5b11131 ↗
34. Passive anti-icing and active deicing films10.1021/acsami.6b03060 ↗
35. Numerical study of magnetohydrodynamics generalized couette flow of eyring-powell fluid with heat transfer and slip condition10.1108/HFF-04-2015-0131 ↗
36. Rashidi, S., Esfahani, J.A., and Ellahi, R. (2017). Convective heat transfer and particle motion in an obstructed duct with two side by side obstacles by means of DPM model. Appl. Sci., 7.10.3390/app7040431 ↗
37. Two phase simulation and sensitivity analysis of effective parameters on combined heat transfer and pressure drop in a solar heat exchanger filled with nanofluid by RSM10.1016/j.molliq.2016.05.031 ↗
38. Enhancement of heat transfer and heat exchanger effectiveness in a double pipe heat exchanger filled with porous media: Numerical simulation and sensitivity analysis of turbulent fluid flow10.1016/j.applthermaleng.2016.08.116 ↗
39. Numerical investigation and sensitivity analysis of effective parameters on combined heat transfer performance in a porous solar cavity receiver by response surface methodology10.1016/j.ijheatmasstransfer.2016.10.008 ↗
40. Electromagnetohydrodynamic (EMHD) peristaltic flow of solid particles in a third-grade fluid with heat transfer10.1051/meca/2016061 ↗
41. Miller, F.P., Vandome, A.F., and McBrewster, J. (2010). Civil Aviation Administration of China, Alphascript Publishing.
42. Electronic confinement and coherence in patterned epitaxial graphene10.1126/science.1125925 ↗
43. Thermal conductivity of graphene nanoribbons10.1063/1.3246155 ↗