Development and Characterization of Anticorrosion and Antifriction Properties for High Performance Polyurethane/Graphene Composite Coatings
Source abstract
Abstract
This work contributes to the development and characterization of the corrosion resistance and antifriction properties of high performance polyurethane (PU)/graphene (Gr) composite coating. In this study, PU composite coatings containing 0, 2, 4 and 8 wt.% of Gr were prepared and evaluated using various corrosion and mechanical tests, namely electrochemical impedance spectroscopy, salt spray tests, cross-cut tape tests and dynamic mechanical analysis. Antifriction properties of the coatings were evaluated using a tribometer with a ball-on-disc mode at room temperature. The corrosion resistance and adhesion property of the PU coatings were found to be enhanced by adding 4 and 8 wt.% of Gr. The coefficient of friction revealed that the antifriction properties of the PU/Gr composite coatings were 61% lower than those of the conventional coating when the Gr content was increased to 8 wt.%.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Engineering Science and Ocean Engineering, National Taiwan University, Taipei 10617, Taiwan
Funding
Ministry of Science and Technology, Taiwan
References (67)
Show source-provided references
1. Effect of nano-ZnO particles on the corrosion behavior of alkyd-based waterborne coatings10.1016/j.porgcoat.2008.07.023 ↗
2. Effect of nanoparticles on the anticorrosion and mechanical properties of epoxy coating10.1016/j.surfcoat.2009.06.048 ↗
3. Effect of nano-sized titanium powder addition on corrosion performance of epoxy coatings10.1016/j.surfcoat.2007.01.042 ↗
4. The role of a zinc phosphate pigment in the corrosion of scratched epoxy-coated steel10.1016/j.corsci.2008.11.015 ↗
5. Influence of polyaniline and ceria nanoparticle additives on corrosion protection of a UV-cure coating on carbon steel10.1016/j.corsci.2014.03.031 ↗
6. Sandwiched polydopamine (PDA) layer for titanium dioxide (TiO2) coating on magnesium to enhance corrosion protection10.1016/j.corsci.2015.03.020 ↗
7. Enhancement of barrier and corrosion protection performance of an epoxy coating through wet transfer of amino functionalized graphene oxide10.1016/j.corsci.2015.11.033 ↗
8. Communication—Multi-Layer Boron Nitride Nanosheets as Corrosion-Protective Coating Fillers10.1149/2.0301602jes ↗
9. Effects of combined surface treatments of aluminium nanoparticle on its corrosion resistance before and after inclusion into an epoxy coating10.1016/j.porgcoat.2016.09.010 ↗
10. Preparation, characterization and electrochemical corrosion studies on environmentally friendly waterborne polyurethane/Na+-MMT clay nanocomposite coatings10.1016/j.eurpolymj.2008.05.037 ↗
11. Enhancement of corrosion protection performance of epoxy coating by introducing new hydrogenphosphate compound10.1016/j.porgcoat.2017.03.014 ↗
12. Anticorrosive performance of waterborne epoxy coatings containing water-dispersible hexagonal boron nitride (h-BN) nanosheets10.1016/j.apsusc.2016.11.141 ↗
13. Novel anti-corrosion coatings from rubber-modified polybenzoxazine-based polyaniline composites10.1016/j.apsusc.2017.05.083 ↗
14. Synthesize and characterization of a novel anticorrosive cobalt ferrite nanoparticles dispersed in silica matrix (CoFe2O4-SiO2) to improve the corrosion protection performance of epoxy coating10.1016/j.apsusc.2016.03.129 ↗
15. Electrochemical Investigations of the Corrosion Protection Properties of an Epoxy-Ester Coating Filled with Cerium Acetyl Acetonate Anticorrosive Pigment10.1149/2.0231713jes ↗
16. Effect of carbon nanotubes on the corrosion resistance of water-borne acrylic coatings10.1016/j.porgcoat.2017.04.043 ↗
17. Multiwall carbon nanotubes-reinforced epoxy hybrid coatings with high electrical conductivity and corrosion resistance prepared via electrostatic spraying10.1016/j.porgcoat.2015.10.006 ↗
18. Effect of carbon nano-tubes on the corrosion resistance of alkyd coating immersed in sodium chloride solution10.1016/j.porgcoat.2015.04.003 ↗
19. High-performance polystyrene/graphene-based nanocomposites with excellent anti-corrosion properties10.1039/C3PY00825H ↗
20. Novel anticorrosion coatings prepared from polyaniline/graphene composites10.1016/j.carbon.2012.06.043 ↗
21. Synergistic effects of hydrophobicity and gas barrier properties on the anticorrosion property of PMMA nanocomposite coatings embedded with graphene nanosheets10.1039/C3PY01178J ↗
22. Self-aligned graphene as anticorrosive barrier in waterborne polyurethane composite coatings10.1039/C4TA02262A ↗
23. A comparative study on fabrication of a highly effective corrosion protective system based on graphene oxide-polyaniline nanofibers/epoxy composite10.1016/j.corsci.2018.01.046 ↗
24. Corrosion Resistance of Graphene-Reinforced Waterborne Epoxy Coatings10.1016/j.jmst.2015.12.017 ↗
25. Reinforcement of graphene and its derivatives on the anticorrosive properties of waterborne polyurethane coatings10.1016/j.compscitech.2016.04.017 ↗
26. Silanized graphene oxide reinforced organofunctional silane composite coatings for corrosion protection10.1016/j.porgcoat.2016.07.008 ↗
27. Fabrication of graphene oxide–alumina hybrids to reinforce the anti-corrosion performance of composite epoxy coatings10.1016/j.apsusc.2015.06.026 ↗
28. Distinctive roles of silane coupling agents on the corrosion inhibition performance of graphene oxide in epoxy coatings10.1016/j.porgcoat.2017.05.008 ↗
29. Excellent corrosion protection performance of epoxy composite coatings filled with amino-silane functionalized graphene oxide10.1016/j.surfcoat.2017.03.050 ↗
30. Investigating the effect of SiO2-graphene oxide hybrid as inorganic nanofiller on corrosion protection properties of epoxy coatings10.1016/j.surfcoat.2017.01.013 ↗
31. Corrosion Protective Properties of Silane Functionalized Graphene Oxide Film on AA2024-T3 Aluminum Alloy10.1149/2.1051613jes ↗
32. Graphene Containing Composite Coatings as a Protective Coatings against Hydrogen Embrittlement in Quenching & Partitioning High Strength Steel10.1149/2.0551605jes ↗
33. Corrosion behavior of Cu during graphene growth by CVD10.1016/j.corsci.2014.08.026 ↗
34. Graphene and graphene oxide and their uses in barrier polymers10.1002/app.39628 ↗
35. The thermal and mechanical properties of a polyurethane/multi-walled carbon nanotube composite10.1016/j.carbon.2006.04.005 ↗
36. Advances in the science and technology of carbon nanotubes and their composites: A review10.1016/S0266-3538(01)00094-X ↗
37. Cathodic delamination of polyurethane/multiwalled carbon nanotube composite coatings from steel substrates10.1016/j.porgcoat.2016.05.002 ↗
38. Excellent tribological and anti-corrosion performance of polyurethane composite coatings reinforced with functionalized graphene and graphene oxide nanosheets10.1039/C5RA10494G ↗
39. Comparative tribological and corrosion resistance properties of epoxy composite coatings reinforced with functionalized fullerene C60 and grapheme10.1016/j.surfcoat.2015.12.056 ↗
40. Achieving high performance corrosion and wear resistant epoxy coatings via incorporation of noncovalent functionalized grapheme10.1016/j.carbon.2016.12.044 ↗
41. Influence of oxidized graphene nanoplatelets and [DMIM][NTf2] ionic liquid on the tribological performance of an epoxy-PTFE coating10.1016/j.triboint.2016.02.005 ↗
42. Identical steady tribological performance of graphene-oxide-strengthened polyurethane/epoxy interpenetrating polymer networks derived from graphene nanosheet10.1016/j.polymer.2015.03.036 ↗
43. The properties of MWCNT/polyurethane conductive composite coating prepared by electrostatic spraying10.1016/j.porgcoat.2015.10.018 ↗
44. Dispersion of single wall carbon nanotubes by in situ polymerization under sonication10.1016/S0009-2614(02)01326-X ↗
45. ASTM International (2011). ASTM Standard, B117-03, Standard Practice for Operating Salt Spray (Fog) Apparatus, ASTM International.
46. McCafferty, E. (2010). Introduction to Corrosion Science, Springer.10.1007/978-1-4419-0455-3 ↗
47. Application of electrochemical impedance spectroscopy to study the degradation of polymer-coated metals10.1016/0300-9440(95)00581-1 ↗
48. Boron nitride nanosheets reinforced waterborne polyurethane coatings for improving corrosion resistance and antifriction properties10.1016/j.eurpolymj.2018.04.042 ↗
49. Corrosion protective performances of commercial low-VOC epoxy/urethane coatings on hot-rolled 1010 mild steel10.1016/S0300-9440(97)00095-7 ↗
50. Corrosion Protection Studies of Crude Glycerol-Based Waterborne Polyurethane Coating on Steel Substrate10.1149/2.0921602jes ↗
51. Determination of water uptake and diffusion of Cl− ion in epoxy primer on aluminum alloys in NaCl solution by electrochemical impedance spectroscopy10.1016/S0300-9440(03)00010-9 ↗
52. Organic coating capacitance measurement by EIS: Ideal and actual trends10.1016/S0013-4686(99)00139-5 ↗
53. Utilizing the structural memory effect of layered double hydroxides for sensing water uptake in organic coatings10.1016/j.porgcoat.2004.07.001 ↗
54. Influence of sol-gel process parameters on the protection properties of sol–gel coatings applied on AA202410.1016/j.surfcoat.2014.02.038 ↗
55. The effect of mixture of mercaptobenzimidazole and zinc phosphate on the corrosion protection of epoxy/polyamide coating10.1016/j.porgcoat.2015.04.020 ↗
56. Use of electrochemical impedance spectroscopy for the study of corrosion protection by polymer coatings10.1007/BF00262955 ↗
57. The role of adhesion in corrosion protection by organic coatings
58. The barrier properties of paint coatings10.1016/0033-0655(91)80001-Y ↗
59. Studies on adhesion characteristics and corrosion behaviour of vinyltriethoxysilane/epoxy coating protective system on aluminium10.1016/j.apsusc.2009.12.100 ↗
60. Advances in corrosion protection by organic coatings: What we know and what we would like to know10.1016/j.porgcoat.2016.04.030 ↗
61. ASTM International (2009). ASTM Standard, D3359, Standard Test Methods for Measuring Adhesion by Tape Test, ASTM International.
62. Tribology of polymers: Adhesion, friction, wear, and mass-transfer10.1016/j.triboint.2005.07.016 ↗
63. Effect of porosity on the damping properties of modified epoxy composites filled with fly ash10.1016/j.scriptamat.2007.05.019 ↗
64. Viscoelasticity in carbon nanotube composites10.1038/nmat1293 ↗
65. Sound absorption and viscoelastic property of acoustical automotive nonwovens and their plasma treatment10.1007/s12221-010-0782-5 ↗
66. The relationships between tribological behaviour and heat-transfer capability of Ti6Al4V alloys10.1016/j.wear.2006.12.041 ↗
67. Fabrication of exfoliated graphene-based polypropylene nanocomposites with enhanced mechanical and thermal properties10.1016/j.polymer.2011.06.045 ↗