Preparation and Thermophysical Properties of New Multi-Component Entropy-Stabilized Oxide Ceramics for Thermal Barrier Coatings
Source abstract
Abstract
Five kinds of multi-component entropy-stabilized oxide ceramics were prepared by a solid-state reaction method for thermal barrier coatings, namely La0.125Y0.125Yb0.125Gd0.125Zr0.5O1.75 (LaYYbGdZr), Y0.125Yb0.125Gd0.125Ta0.125Zr0.5O1.875 (YYbGdTaZr), La0.1Y0.1Yb0.1Gd0.1Ta0.1Zr0.5O1.85 (LaYYbGdTaZr), Y0.125Yb0.125Gd0.125Ta0.125Hf0.25Zr0.25O1.875 (YYbGdTaHfZr), and La0.1Y0.1Yb0.1Gd0.1Ta0.1Hf0.25Zr0.25O1.85 (LaYYbGdTaHfZr). Many properties of the materials were studied, such as their microscopic morphology, crystal structure, thermophysical properties, and ablation resistance. The results show that the oxide ceramics synthesized in this paper have a uniform single-phase defect fluorite structure, and can still maintain this structure after high-temperature treatment at 1500 °C. The YYbGdTaHfZr coatings had the lowest thermal conductivity (0.61~0.89 W·m–1·K–1), which was much lower than that of YSZ. The ceramic blocks also exhibited excellent thermal expansion properties. The thermal expansion coefficient of LaYYbGdTaZr could reach 11.09 × 10−6 K−1 (1400 °C), which was slightly higher than that of 8YSZ (11.0 × 10−6 K−1). The antioxidant ablation results proved that the YYbGdTaHfZr coating showed the best heat-insulating property. All the results showed that the YYbGdTaHfZr coating is a promising thermal barrier coating.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Chemical Engineering, University of Chinese Academy of Sciences, Beijing 100039, China
State Key Laboratory of Multi-Phase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
Beijing Power Machinery Research Institute, Beijing 100074, China
References (42)
Show source-provided references
1. Thermal Barrier Coatings for Gas-Turbine Engine Applications10.1126/science.1068609 ↗
2. Protective Coatings in the Gas Turbine Engine
3. Mechanisms controlling the durability of thermal barrier coatings10.1016/S0079-6425(00)00020-7 ↗
4. Thermal Barrier Coatings: Current Status, Search, and Analysis10.1007/s11106-018-9958-0 ↗
5. The Tetragonal-Monoclinic Transformation in Zirconia: Lessons Learned and Future Trends10.1111/j.1551-2916.2009.03278.x ↗
6. Entropy-stabilized oxides10.1038/ncomms9485 ↗
7. Recent Progress in High-entropy Alloys10.3166/acsm.31.633-648 ↗
8. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
9. Gao, M.C., Yeh, J.-W., Liaw, P.K., and Zhang, Y. (2016). High-Entropy Alloys: Fundamentals and Applications, Springer.10.1007/978-3-319-27013-5 ↗
10. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
11. Alloy Design Strategies and Future Trends in High-Entropy Alloys10.1007/s11837-013-0761-6 ↗
12. Multicomponent high-entropy Zr-Y-Yb-Ta-Nb-O oxides for next-generation thermal barrier coating applications10.1111/jace.18053 ↗
13. Preparation and properties of CMAS resistant bixbyite structured high-entropy oxides RE2O3 (RE = Sm, Eu, Er, Lu, Y, and Yb): Promising environmental barrier coating materials for Al2O3f/Al2O3 composites
14. A five-component entropy-stabilized fluorite oxide10.1016/j.jeurceramsoc.2018.04.063 ↗
15. Ta2O5–Y2O3–ZrO2 system: Experimental study and preliminary thermodynamic description10.1016/j.jeurceramsoc.2010.09.009 ↗
16. Opportunities for TBCs in the ZrO2–YO1.5–TaO2.5 system10.1016/j.surfcoat.2006.11.011 ↗
17. Phase Stability and Physical Properties of Cubic and Tetragonal ZrO2 in the System ZrO2-Y2O3-Ta2O510.1111/j.1151-2916.1991.tb04302.x ↗
18. Levi Phase equilibria in the ZrO2-YO1.5-TaO2.5 system at 1500 °C10.1016/j.jeurceramsoc.2017.06.031 ↗
19. High-entropy pyrochlores with low thermal conductivity for thermal barrier coating materials10.1007/s40145-019-0342-4 ↗
20. Kim, K., and Kim, W. (2021). Effect of Heat Treatment on Microstructure and Thermal Conductivity of Thermal Barrier Coating. Materials, 14.10.3390/ma14247801 ↗
21. Effect of microstructure evolution and crystal structure on thermal properties for plasma-sprayed RE2SiO5 (RE = Gd, Y, Er) environmental barrier coatings10.1016/j.jmst.2020.11.077 ↗
22. The influence of bondcoat and topcoat mechanical properties on stress development in thermal barrier coating systems10.1016/j.actamat.2009.01.017 ↗
23. Preparation and Thermal Properties of Rare Earth Tantalates (RETaO4) High-Entropy Ceramics
24. Mechanical and thermal properties of simultaneously substituted pyrochlore compounds (Ca2Nb2O7)x(Gd2Zr2O7)1−x10.1016/j.jeurceramsoc.2014.10.009 ↗
25. Thermal barrier coating materials10.1016/S1369-7021(05)70934-2 ↗
26. Effect of lattice defects on thermal conductivity of Ti-doped, Y2O3-stabilized ZrO210.1016/j.actamat.2013.05.038 ↗
27. Thermal conductivity of doped polysilicon layers10.1109/84.946782 ↗
28. Microstructure and thermal properties of RETaO4 (RE = Nd, Eu, Gd, Dy, Er, Yb, Lu) as promising thermal barrier coating materials10.1016/j.scriptamat.2016.08.019 ↗
29. Low thermal conductivity without oxygen vacancies in equimolar YO1.5 + TaO2.5- and YbO1.5 + TaO2.5-stabilized tetragonal zirconia ceramics10.1016/j.actamat.2010.04.040 ↗
30. Charge-Induced Disorder Controls the Thermal Conductivity of Entropy-Stabilized Oxides10.1002/adma.201805004 ↗
31. Tailored microstructure of zirconia and hafnia-based thermal barrier coatings with low thermal conductivity and high hemispherical reflectance by EB-PVD10.1023/B:JMSC.0000017759.50800.d7 ↗
32. On the minimum limit to thermal conductivity of multi-atom component crystalline solid solutions based on impurity mass scattering10.1016/j.scriptamat.2017.05.045 ↗
33. Ceramic materials for thermal barrier coatings10.1016/S0955-2219(03)00129-8 ↗
34. High-entropy (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Ce2O7: A potential thermal barrier material with improved thermo-physical properties10.1007/s40145-021-0563-1 ↗
35. Materials Design for the Next Generation Thermal Barrier Coatings10.1146/annurev.matsci.33.011403.113718 ↗
36. Modelling of TBC system failure: Stress distribution as a function of TGO thickness and thermal expansion mismatch10.1016/j.engfailanal.2004.12.027 ↗
37. Pauling’s Electronegativity Equation and a New Corollary Accurately Predict Bond Dissociation Enthalpies and Enhance Current Understanding of the Nature of the Chemical Bond10.1021/jo020650g ↗
38. A novel lattice energy calculation technique for simple inorganic crystals10.1016/j.physb.2016.10.025 ↗
39. Crack-healing behaviour of MoSi2 dispersed Yb2Si2O7 environmental barrier coatings10.1016/j.ceramint.2022.06.258 ↗
40. High entropy defective fluorite structured rare-earth niobates and tantalates for thermal barrier applications10.1007/s40145-020-0368-7 ↗
41. Dingwell, Thermophysical properties and cyclic lifetime of plasma sprayed SrAl12O19 for thermal barrier coating applications10.1111/jace.17319 ↗
42. Failure of plasma sprayed nano-zirconia-based thermal barrier coatings exposed to molten CaO-MgO-Al2O3-SiO2 deposits10.1111/jace.16498 ↗