Review of Physical and Mechanical Properties, Morphology, and Phase Structure in Cr3C2-NiCr Composite Coatings Sprayed by HVOF Method
Source abstract
Abstract
This review paper presents a detailed analysis of the influence of high-velocity oxygen–fuel (HVOF) spraying parameters on the microstructure formation and performance characteristics of Cr3C2-NiCr coatings. Key HVOF parameters, including the spray distance, oxygen-to-fuel ratio, powder feed rate, and spraying temperature, are examined in relation to their impact on coating properties. Structural parameters such as density, porosity, adhesive strength, and microhardness, which determine the mechanical behavior of the coating, are analyzed. Special attention is paid to wear resistance mechanisms, adhesion to the substrate, and resistance to fatigue failure. Additionally, the thermal stability of the coatings, their coefficient of thermal expansion, and oxidation resistance are investigated. This study also evaluates the morphology and phase composition of the coatings under different HVOF spraying conditions. An overview of modern diagnostic techniques, such as electron microscopy and spectroscopy, is provided. Compared to traditional surface treatment methods, HVOF spraying offers superior coating density, higher adhesion strength, and enhanced wear and corrosion resistance, making it an effective solution for extending the service life of components. Based on the findings, this paper highlights promising applications of Cr3C2-NiCr coatings in the aviation, power engineering, and mechanical engineering industries, where high wear resistance and thermal stability are crucial.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The Research Institute “Natural Sciences, Nanotechnology and New Materials”, Khoja Akhmet Yassawi International Kazakh-Turkish University, Turkestan 161200, Kazakhstan
International School of Engineering, Daulet Serikbayev East Kazakhstan Technical University, Ust-Kamenogorsk 070002, Kazakhstan
PlasmaScience LLP, Ust-Kamenogorsk 070010, Kazakhstan
Funding
Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan
References (100+)
Show source-provided references
1. Pulsed Laser Re-Melting Supersonic Plasma Sprayed Cr₃C₂-NiCr Coatings for Regulating Microstructure, Hardness, and Corrosion Properties10.1016/j.surfcoat.2021.127258 ↗
2. Microstructure and Performance of Nb-Bearing Ni60A- Cr3C2 Coatings Manufactured by Laser Cladding10.1080/02670844.2019.1631510 ↗
3. Microstructural Characteristics and Corrosion Behavior of HVAF- and HVOF-Sprayed Fe-Based Coatings10.1016/j.surfcoat.2016.11.088 ↗
4. Research on Remanufacturing Strategy for 45 Steel Gear Using H13 Steel Powder Based on Laser Cladding Technology10.1016/j.jmapro.2019.12.009 ↗
5. Analysis of D-gun Sprayed Coating on Medium Carbon Steel10.1016/j.matpr.2019.07.699 ↗
6. Romanchenko, O., Porkuian, O., Kharlamov, Y., Sokolov, V., and Krol, O. (2022). Research of Features of Oxide Coatings Deposition by D-gun Spraying. International Conference Innovation in Engineering, Springer International Publishing.10.1007/978-3-031-09382-1_27 ↗
7. Dry Sliding Wear Behaviors of Fe-based Amorphous Metallic Coating Synthesized by D-gun Spray10.1016/j.jnoncrysol.2020.120018 ↗
8. Comparative Studies on Oxidation Behaviour of Cobalt-based D-gun Coatings on Boiler Steel10.1016/j.surfcoat.2023.130055 ↗
9. Singh, S., Raman, R.K.S., Berndt, C.C., and Singh, H. (2021). Influence of Cold Spray Parameters on Bonding Mechanisms: A Review. Metals, 11.10.3390/met11122016 ↗
10. A Brief Review on Cold Spray Coating Process10.1016/j.matpr.2020.01.482 ↗
11. A Comprehensive Review on Sustainable Cold Spray Additive Manufacturing: State of the Art, Challenges and Future Directions10.1016/j.jclepro.2021.127606 ↗
12. Janka, L. (2018). Thermally Sprayed Cr3C2-NiCr Coatings: Improving the Abrasion Resistance, Tampere University of Technology.
13. Hydrogen-Induced Embrittlement and Degradation of Zirconium Alloys in Nuclear Reactors: A Review
14. Effect of Trace Nickel Addition on Microstructure, Corrosion Resistance and Hydrogen Absorption of Zr-4 Alloy
15. State of the Art of HVOF Coating Investigations-A Review10.4031/002533205787443908 ↗
16. Development of Metal-Ceramic Composite Coatings for Zirconium Alloys in Nuclear Reactors
17. Advances in Protective Coating Technology for Zirconium Alloys Used in Nuclear Applications
18. Comparison of the High Burn-Up Corrosion on M5 and Low Tin Zircaloy-410.1520/JAI12404 ↗
19. Effects of Oxide and Hydrogen on the Behavior of Zircaloy-4 Cladding during the Loss of the Coolant Accident (LOCA)10.1016/j.nucengdes.2006.02.012 ↗
20. Hydrogen Enhanced Degradation and Oxide Effects in Zirconium Alloys for Nuclear Applications10.1016/j.ijhydene.2011.04.002 ↗
21. Accident Tolerant Nuclear Fuels and Cladding Materials10.1007/s11837-017-2701-3 ↗
22. Hydrogen in Zirconium Alloys: A Review10.1016/j.jnucmat.2019.02.042 ↗
23. Current Status of Materials Development of Nuclear Fuel Cladding Tubes for Light Water Reactors10.1016/j.nucengdes.2017.02.031 ↗
24. Hydrogen Embrittlement and High-Temperature Oxidation of Zirconium Alloys in Nuclear Reactors
25. Development of Metal-Ceramic Composite Coatings to Prevent Hydrogen Uptake and Oxidation of Zirconium Alloys
26. Pierson, H.O. (1996). Carbides of Group IV: Titanium, Zirconium, and Hafnium Carbides, William Andrew Publishing.10.1016/B978-081551392-6.50005-2 ↗
27. (2002). A Technology Roadmap for Generation IV Nuclear Energy Systems, USDOE.
28. Berger, L.M., Hermel, W., Vuoristo, P., Mäntylä, T., Lengauer, W., and Ettmayer, P. (1996., January 7–11). Structure, Properties and Potentials of WC-Co, Cr3C2-NiCr and TiC-Ni-Based Hardmetal-Like Coatings. Proceedings of the Thermal Spray 1996: International Thermal Spray Conference, Cincinnati, OH, USA.10.31399/asm.cp.itsc1996p0089 ↗
29. Cr3C2-NiCr and WC-Ni Thermal Spray Coatings as Alternatives to Hard Chromium for Erosion-Corrosion Resistance10.1016/j.surfcoat.2007.06.048 ↗
30. Thermally-Sprayed WC-Based Cermet Coatings for Corrosion Resistance Applications10.1007/s11837-018-3131-6 ↗
31. Creation of Modified Cr₃C₂-NiCr Hardmetal Coating Microstructures Through Novel Processing10.1016/j.jallcom.2020.153868 ↗
32. Comparative Study of the Dry Sliding Wear Behavior of HVOF-Sprayed WC-(W, Cr)2C-Ni and WC-CoCr Hardmetal Coatings10.1016/j.wear.2013.11.001 ↗
33. HVAF vs. Oxygenated HVAF Spraying: Fundamental Understanding to Optimize Cr3C2-NiCr Coatings for Elevated Temperature Erosion Resistant Applications10.1016/j.jmatprotec.2022.117735 ↗
34. Thermal Stability of Nanostructured Cr3C2-NiCr Coatings10.1361/105996301770349385 ↗
35. Steam and Air Oxidation Behavior of Thermal Spray Chromium Carbide-Based Composite Coatings10.1016/j.ijrmhm.2022.106088 ↗
36. Long-Term Carbide Development in High-Velocity Oxygen Fuel/High-Velocity Air Fuel Cr3C2-NiCr Coatings Heat Treated at 900 °C10.1361/10599630421442 ↗
37. Characterization and High-Temperature Fretting Wear Resistance of HVOF-Sprayed Cr3C2-NiCr, CoCrWC and CoCrWNiC Hardfacing Coatings10.1007/s11666-022-01431-y ↗
38. High-Temperature Oxidation of HVOF Thermally Sprayed NiCr-Cr3C2 Coatings: Microstructure and Kinetics10.1007/s10853-015-9238-z ↗
39. Application of Hardmetals as Thermal Spray Coatings10.1016/j.ijrmhm.2014.09.029 ↗
40. Structural Characteristics and Wear, Oxidation, Hot Corrosion Behaviors of HVOF Sprayed Cr3C2-NiCr Hardmetal Coatings10.1016/j.surfcoat.2023.129319 ↗
41. The Tribological and Electrochemical Behavior of HVOF-Sprayed Cr3C2-NiCr Ceramic Coating on Carbon Steel10.1016/j.ceramint.2014.12.102 ↗
42. Precipitation Phenomenon in Nanostructured Cr3C2-NiCr Coatings10.1016/S0921-5093(00)01383-6 ↗
43. Role of Heat Treatments in the Improvement of the Sliding Wear Properties of Cr3C2-NiCr Coatings10.1016/S0257-8972(02)00148-2 ↗
44. Aligizaki, K.K., and Pawlowski, L. (2008). Surface Engineering for Corrosion and Wear Resistance, Wiley.
45. Mattox, D.M. (2010). Handbook of Physical Vapor Deposition (PVD) Processing, William Andrew. [2nd ed.].10.1016/B978-0-8155-2037-5.00008-3 ↗
46. Ohring, M. (2002). Materials Science of Thin Films: Deposition and Structure, Academic Press. [2nd ed.].10.1016/B978-012524975-1/50012-4 ↗
47. Pierre, A.C. (2020). Introduction to Sol-Gel Processing, Springer Nature.10.1007/978-3-030-38144-8 ↗
48. Pelton, J.F., and Koffskey, J.M. (1964). Coating Composition, Method of Application, and Product Thereof. (3150938 A), US Patent.
49. Plasma- and Vacuum-Plasma-Sprayed Cr3C2 Composite Coatings10.1016/0040-6090(81)90637-4 ↗
50. Comparison of Properties of Cr3C2-NiCr Coatings Thermally Sprayed from Pre-Alloyed and Mechanically Mixed Powders10.1016/0040-6090(84)90279-7 ↗
51. Detonation Spraying of Cr3C2-NiCr Coatings and Their Properties10.1007/s11666-021-01301-z ↗
52. Investigation of Oxidation Behaviors of Coated Zircaloy as Accident-Tolerant Fuel with CrAlN and CrAlSiN Coatings in High-Temperature Steam10.1016/j.corsci.2020.108896 ↗
53. Evaluation of Wear Resistance of CrN, CrAlN, and TiAlN Coatings Deposited by Multi-Arc Ion Plating on Spinning Components
54. Optimization of the Laser Remelting Process for HVOF-Sprayed Stellite 6 Wear Resistant Coatings10.1016/j.optlastec.2015.09.005 ↗
55. Micro-Arc Oxidation for Improving High-Temperature Oxidation Resistance of Additively Manufacturing Ti2AlNb10.1016/j.surfcoat.2022.128719 ↗
56. Anodic Processes in Plasma Electrolytic Oxidation of Aluminum in Alkaline Solutions10.1016/j.electacta.2003.11.027 ↗
57. Calcium Phosphate Coatings for Bio-Implant Applications: Materials, Performance Factors, and Methodologies10.1016/j.mser.2009.05.001 ↗
58. Review of the Biocompatibility of Micro-Arc Oxidation Coated Titanium Alloys10.1016/j.matdes.2015.07.086 ↗
59. Mechanical Properties Optimization of Cr3C2-NiCr Coatings Produced by Compact Plasma Spray Process10.1016/j.surfcoat.2023.129570 ↗
60. Changes in Adhesion of CrN Coatings on Zr-1%Nb Alloy Substrates Preliminary Irradiated with High-Intensity Pulsed Ion Beams10.1615/HighTempMatProc.2022043388 ↗
61. Effects of Process Parameters on Molten Particle Speed and Surface Temperature and the Properties of HVOF CrC-NiCr Coatings10.1016/S0257-8972(00)00873-2 ↗
62. Microstructural Characterization and Abrasive Wear Performance of HVOF Sprayed Cr3C2-NiCr Coating10.1016/j.surfcoat.2005.10.005 ↗
63. Robotti, P., and Zappini, G. (2012). Thermal Plasma Spray Deposition of Titanium and Hydroxyapatite on Polyaryletheretherketone Implants. PEEK Biomaterials Handbook, William Andrew Publishing.10.1016/B978-1-4377-4463-7.10009-0 ↗
64. Protection of Zirconium by Alumina- and Chromia-Forming Iron Alloys under High-Temperature Steam Exposure10.1016/j.jnucmat.2013.03.006 ↗
65. Long-Term Compositional/Microstructural Development of Cr3C2-NiCr Coatings at 500 °C, 700 °C and 900 °C10.1016/j.ijrmhm.2016.05.010 ↗
66. Desirability-Based Multi-Criteria Optimization of HVOF Spray Experiments to Manufacture Fine Structured Wear-Resistant 75Cr3C2-25(NiCr20) Coatings10.1007/s11666-009-9383-5 ↗
67. Evaluation of Cyclic Hot Corrosion Behavior of Detonation Gun Sprayed Cr3C2-25% NiCr Coatings on Nickel- and Iron-Based Superalloys10.1016/j.surfcoat.2008.09.031 ↗
68. Role of Micro-Factors on Microstructure and on the Tribological Performance of HVOF Coatings: A Review10.1088/1757-899X/1017/1/012010 ↗
69. Microstructural Influence on Erosion Behavior of Thermal-Spray Coatings10.1017/S1431927605502514 ↗
70. Friction and Wear Behavior of Chromium Carbide Coatings10.1016/0257-8972(87)90111-3 ↗
71. Slurry Erosion Behavior of HVOF Sprayed Coatings on Hydro Turbine Steel: A Review10.1088/1757-899X/1033/1/012064 ↗
72. Slurry Erosive Wear Evaluation of HVOF-Spray Cr2O3 Coating on Some Turbine Steels10.1007/s11666-012-9795-5 ↗
73. Sarin, V.K., Mari, D., Llanes, L., and Nebel, C. (2014). Coatings by Thermal Spray. Comprehensive Hard Materials, Elsevier.
74. The Chromium-Nickel-Carbon (Cr-Ni-C) Phase Diagram10.1007/s11669-999-0011-3 ↗
75. A Study of Cr3C2-Based HVOF-and HVAF-Sprayed Coatings: Microstructure and Carbide Retention10.1007/s11666-017-0578-x ↗
76. Sliding wear behavior of HVOF and HVAF sprayed Cr3C2-based coatings10.1016/j.wear.2017.04.001 ↗
77. Novel utilization of liquid feedstock in high velocity air fuel (HVAF) spraying to deposit solid lubricant reinforced wear resistant coatings10.1016/j.jmatprotec.2021.117203 ↗
78. Rakhadilov, B., Muktanova, N., Kengesbekov, A., and Magazov, N. (2025). Use of Computational Fluid Dynamics (CFD) Methods to Analyze Combustion Chamber Processes at HVOF Spraying and Their Comparison with Experimental Data. Modeling, 6.10.3390/modelling6010004 ↗
79. Microstructure and cavitation–silt erosion behavior of high-velocity oxygen–fuel (HVOF) sprayed Cr3C2-NiCr coating10.1016/j.surfcoat.2013.03.020 ↗
80. Evaluation of sprayed chromium carbide coatings for gas-cooled reactor applications10.1016/0040-6090(78)90227-4 ↗
81. Development of several new nickel aluminide and chromium carbide coatings for use in high temperature nuclear reactors10.1016/0040-6090(83)90304-8 ↗
82. Steam oxidation resistance of plasma sprayed chromium-containing coatings at 1200 °C10.1002/maco.201810156 ↗
83. Review of thermal spray coating applications in the steel industry: Part 1—Hardware in steel making to the continuous annealing process10.1007/s11666-010-9518-8 ↗
84. The 2016 Thermal Spray Roadmap10.1007/s11666-016-0473-x ↗
85. Rakhadilov, B., Muktanova, N., Kakimzhanov, D., Satbayeva, Z., Kassenova, L., and Magazov, N. (2024). Investigation of the Influence of Powder Fraction on Tribological and Corrosion Characteristics of 86WC-10Co-4Cr Coating Obtained by HVOF Method. Coatings, 14.10.3390/coatings14060651 ↗
86. Abrasive wear maps for High Velocity Oxy Fuel (HVOF) sprayed WC-12Co and Cr3C2-25NiCr coatings10.1016/j.triboint.2017.04.037 ↗
87. Effect of heat treatment on friction and abrasive wear behavior of WC-12Co and Cr3C2-25NiCr coatings10.1016/j.triboint.2017.10.017 ↗
88. Tribological behavior of HVOF sprayed WC-12Co, WC-10Co-4Cr and Cr3C2-25NiCr coatings10.1016/j.triboint.2016.09.025 ↗
89. Abrasive wear behavior of WC–CoCr and Cr3C2-20(NiCr) deposited by HVOF and detonation spray processes10.1016/j.surfcoat.2004.10.136 ↗
90. Comparative Study of Thermally Sprayed Coatings Under Different Types of Wear Conditions for Hard Chromium Replacement10.1007/s11249-011-9791-9 ↗
91. The erosion-oxidation behavior of HVOF Cr3C2-NiCr cermet coating10.1016/0043-1648(94)90100-7 ↗
92. High temperature erosion of Cr3C2-NiCr thermal spray coatings—The role of phase microstructure10.1016/j.surfcoat.2008.10.008 ↗
93. Xie, M., Lin, Y., Ke, P., Wang, S., Zhang, S., Zhen, Z., and Ge, L. (2017). Influence of Process Parameters on High Velocity Oxy-Fuel Sprayed Cr3C2-25%NiCr Coatings. Coatings, 7.10.3390/coatings7070098 ↗
94. Engineering HVOF-Sprayed Cr3C2-NiCr Coatings: The Effect of Particle Morphology and Spraying Parameters on the Microstructure, Properties, and High Temperature Wear Performance10.1007/s11666-012-9833-3 ↗
95. Structure and wear behavior of HVOF sprayed Cr3C2-NiCr and WC–Co coatings10.1016/S0261-3069(03)00059-1 ↗
96. Sliding and Abrasive Wear Behavior of HVOF- and HVAF-Sprayed Cr3C2-NiCr Hardmetal Coatings10.1016/j.wear.2016.03.034 ↗
97. High temperature wear performance of HVOF-sprayed Cr3C2-WC-NiCoCrMo and Cr3C2-NiCr hardmetal coatings10.1016/j.apsusc.2017.04.132 ↗
98. Zhou, Z., Duan, D., Li, S., Sun, D., Yong, J., Jiang, Y., He, W., and Xu, J. (2023). Microstructure and High-Temperature Properties of Cr3C2-NiCr Nanoceramic Coatings Prepared by HVAF. Coatings, 13.10.3390/coatings13101741 ↗
99. Selvam Kevin, P., Tiwari, A., Seman, S., Beer Mohamed, S.A., and Jayaganthan, R. (2020). Erosion-Corrosion Protection Due to Cr3C2-NiCr Cermet Coating on Stainless Steel. Coatings, 10.10.3390/coatings10111042 ↗
100. Rakhadilov, B., Muktanova, N., Seitkhanova, A., Kakimzhanov, D., and Dautbekov, M. (2024). Investigation of the Influence of the Oxygen Flow Rate on the Mechanical, Structural and Operational Properties of 86WC-10Co-4Cr Coatings, as Determined Using the High-Velocity Oxyfuel Spraying Method. Coatings, 14.10.3390/coatings14101275 ↗