Comparative Study of Anti-Corrosion Properties and Lifespan Prediction Model for Inorganic Zinc-Rich Coating and Thermal-Spray Zinc Coating
Source abstract
Abstract
On the basis of guaranteeing the reliability of the coating, thermal-spray zinc coating has been verified by the industry to have a lifespan of more than 20 years. It is an anti-corrosion coating with excellent performance. Inorganic zinc-rich coating being a new coating technology has a certain degree of influence on its popularization and application in the field of anti-corrosion; this is due to the lack of relevant comparison data on its anti-corrosion performance and service life. It is necessary to compare and analyze the service life and corrosion resistance of the two coatings, so as to obtain the best application scenarios for the two coatings and provide a reference for the selection of the most economical coating. Based on coating reliability, 7500 h of accelerated salt-spray tests of inorganic zinc-rich coating and of the thermal-spray coating of steel structures were carried out. Electrochemical and salt-spray tests on inorganic zinc-rich coating and thermal-spray zinc coating were carried out. The micro-corrosion morphology, corrosion rate and corrosion mechanism of the two coatings and the factors affecting the corrosion rate were obtained. An interfacial corrosion-thinning and weight-loss equation was established to predict the service life of inorganic zinc-rich coating by comparing it with that of the thermal-spray zinc coating salt-spray test; they suggested that inorganic zinc-rich coating has a longer service life. The results are of practical guiding significance for the selection of a zinc coating and the rapid selection and design of a supporting scheme, and can also provide a reference for the service-life prediction of other types of coatings.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580, China
National Engineering Research Center for Coatings, CNOOC Changzhou Paint and Coatings Industry Research Institute Co., Ltd., Changzhou 213016, China
References (35)
Show source-provided references
1. Corrosion protection technology for construction sites welded joints of a hot-dip galvanized steel bridge
2. Comparison of corrosion resistance among Thermal Zinc-spraying coating, Cold Thermal Zinc-spraying coating and Zinc-rich paint coating
3. Research Progress of Coating Life Prediction and Reliability Evaluation
4. Corrosion protection and assessment of weathering steel highway struc tures10.1016/j.jcsr.2010.04.012 ↗
5. Performance assessment of specialist conductive paint for catholic protection of steel in reinforced concrete structures10.1016/j.conbuildmat.2019.07.344 ↗
6. Failure Probability of the TBCs Induced by Interface Oxidation and Its Influencing Factors with the Consideration of Interface Morphology
7. Reliability and Design Analysis of Coatings Used in Passive Containment Vessel of Nuclear Power Plant
8. Effect of Zn and Mg alloying on microstructure and anticorrosion mechanisms of Al-Si based coatings for high strength steel10.1016/j.corsci.2018.10.037 ↗
9. Markov approach to early diagnostics, reliability assessment, residual life and optimal mainte nance of pipeline systems10.1016/j.strusafe.2015.05.006 ↗
10. Comparison on corrosion behavior of arc sprayed and zinc-rich coatings10.1016/j.surfcoat.2013.07.046 ↗
11. Relationship between microstructure and corrosion per formance of AA2050-T8 aluminium alloy after excimer laser surface melting10.1016/j.corsci.2010.03.003 ↗
12. Corrosion behavior of a Zn/Zn-Al double coating in 5%NaCl solution10.20964/2018.12.85 ↗
13. Developing Mg–Zn surface alloy by friction surface allosying: In vitro degradation studies in simulated body fluids10.1007/s12613-020-2053-9 ↗
14. Characterization of zinc-rich powder coatings by EIS and Raman spectroscopy10.1016/S0257-8972(02)00147-0 ↗
15. Effect of the direct current electric field on the initial corrosion of steel in simulated industrial atmospheric environment10.1016/j.corsci.2015.07.029 ↗
16. In situ investigation of sacrificial behaviour of hot dipped AlSi coating in su phate and chloridesolutions10.1016/j.corsci.2013.01.018 ↗
17. A new approach for parameter estimation of finite Weibull mixture distributions for reliability modeling10.1016/j.apm.2012.04.023 ↗
18. Low-Temperature Stress Corrosion Cracking of Stainless Steels in the Atmosphere in the Presence of Chloride Deposits10.5006/1.3319115 ↗
19. Modeling the rate of corrosion of carbon steel using activated diethanolamine solutions for CO2 absorption10.1016/j.cjche.2020.03.006 ↗
20. Investigation of erosion behavior of 304 stainless steel under solid–liquid jet flow impinging at 30°10.1007/s12182-020-00473-7 ↗
21. Corrosion Behavior of Field-Exposed Zinc in a Tropical Marine Atmosphere10.5006/1177 ↗
22. An electrochemical investigation on the effect of the chloride content on CO2 corrosion of API-X100 steel10.1016/j.corsci.2012.06.032 ↗
23. Morphological and microstructural properties of two-phase Ni–Cu films electrodeposited at different electrolyte temperatures10.1016/j.jallcom.2012.10.071 ↗
24. Corrosion product film formed on the 90/10 copper-nickel tube in natural seawater: Composition/structure and formation mechanism10.1016/j.corsci.2014.11.028 ↗
25. Copper-nickel alloys modified with thin surface films: Corrosion behavior in the presence of chlorideions10.1016/j.corsci.2010.09.041 ↗
26. Investigation of corrosion protection afforded by inorganic anticorrosive coatings comprising micaceous iron oxide and zinc dust10.1179/1743278212Y.0000000060 ↗
27. Preparation of graphene nanoplate added zinc-rich epoxy coatings for en hanced sacrificial anode-based corrosion protection10.1016/j.corsci.2019.108120 ↗
28. Resistance of zinc thermal sprayed coat ings on different corrosive environments10.1007/s10973-006-7798-5 ↗
29. Incorporation of electroconductive carbon fibers to achieve en hanced anti-corrosion performance of zinc rich coatings10.1016/j.jcis.2020.02.002 ↗
30. Research on Zn-Al15 thermal spray metal coating and its organic painting composite system protection performance10.1016/j.proeng.2011.12.632 ↗
31. Dhakal, D.R., Kshetri, Y.K., Chaudhary, B., Kim, T.-H., Lee, S.W., Kim, B.S., Song, Y., Kim, H.S., and Kim, H.H. (2022). Particle-Size-Depend ent Anticorrosion Performance of the Si3N4-Nanoparticle-Incorporated Electroless Ni-P Coating. Coatings, 12.10.3390/coatings12010009 ↗
32. Mechanistic study of ammonium-induced corrosion of AZ31 magne sium alloy in sulfate solution10.1016/j.jmst.2020.02.074 ↗
33. Microstructural evolution and mechanical, and corrosion property evaluation of Cu–30Ni alloy formed by Direct Metal Deposition process10.1016/j.jallcom.2011.03.091 ↗
34. Experiment and design methods of composite scarf repair for primary-load bearing structures10.1016/j.compositesa.2016.05.011 ↗
35. Accelerated tests, a necessary complement of electrochemical assays to evaluate anti-corrosive coatings10.1007/s10800-019-01324-z ↗