A Review of Research on Improving Wear Resistance of Titanium Alloys
Source abstract
Abstract
Titanium alloy is widely used as oil drill pipe material because of its light weight, high strength, good toughness, corrosion resistance, fatigue resistance, and good process performance. However, due to its low hardness, poor wear resistance, serious oxidation at high temperature (700 °C), and difficulty in lubrication, in oil and gas field exploration and development drilling, especially in deep wells, high displacement wells, horizontal wells, and highly deviated wells, wear and tear are prone to occur. The application and development of titanium alloys are greatly limited. This paper introduces the research status of the common surface modification technologies of titanium alloys, such as laser cladding, magnetron sputtering, plasma spraying, micro arc oxidation, etc. It points out the improvement effect of various modification technologies on the wear resistance and high-temperature oxidation resistance of titanium alloys and discusses the advantages and disadvantages of various modification technologies. A proposed method for enhancing the wear resistance and high-temperature oxidation resistance of titanium alloys was finally introduced, and its potential for future development was investigated.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
No. 3 Oil Production Plant, PetroChina Changqing Oilfifield Company, Yinchuan 750006, China
School of Material Science and Engineering, Xi’an Shiyou University, Xi’an 710065, China
State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, China
State Key Laboratory of Tribology in Advanced Equipment, Tsinghua University, Beijing 100084, China
Nation Center for Materials Service Safety, University of Science and Technology Beijing, Beijing 100083, China
Henan International Joint Laboratory of Dynamics of Impact and Disaster of Engineering Structures, Nanyang Institute of Technology, Nanyang 473004, China
Petroleum Systems Engineering, Faculty of Engineering and Applied Science, University of Regina, Regina, SK S4S 0A2, Canada
Shaanxi Coal Industry New Energy Technology Co., Ltd., Xi’an 710199, China
China Railway First Survey and Design Institute Group Co., Ltd., Xi’an 710043, China
Funding
National Natural Science Foundation of China · Youth Innovation Team Construction in Shaanxi Universities · Young Scientific Research and Innovation Team of Xi’an Shiyou University · Open Research Fund from the State Key Laboratory of Rolling and Automation, Northeastern University · Tribology Science Fund of State Key Laboratory of Tribology in Advanced Equipment · Opening Project Fund of Materials Service Safety Assessment Facilities · Henan International Joint Laboratory of Dynamics of Impact and Disaster of Engineering Structures, Nanyang Institute of Technology · China Scholarship Council Foundation
References (76)
Show source-provided references
1. Simulation study on leakage acoustic source characteristics of gas well tubing and casing
2. Surface damage mitigation of Ti6Al4V alloy via thermal oxidation for oil and gas exploitation application: Characterization of the microstructure and evaluation of the surface performance10.1039/C6RA28421C ↗
3. Microarc oxidation coatings formed on Ti6Al4V in Na2SiO3 system solution: Microstructure, mechanical and tribological properties10.1016/j.surfcoat.2005.10.044 ↗
4. Tribological properties of titanium alloys10.1016/0043-1648(91)90249-T ↗
5. Kinetic aspects of aluminium titanate layer formation on titanium alloys by plasma electrolytic oxidation10.1016/S0169-4332(02)00848-6 ↗
6. Research and development of titanium alloy OCTG application in energy industry
7. Application of titanium alloy in oil & gas exploration and development
8. Research progress of surface modification technology of TC4 titanium alloy
9. Effects of graphene nanosheets on the ceramic coatings formed on Ti6Al4V alloy drill pipe by plasma electrolytic oxidation10.1016/j.jallcom.2019.03.060 ↗
10. Effect of titanium on dry sliding wear behavior of hot forged P/M low alloy steels10.1016/j.matpr.2020.01.481 ↗
11. Surface hardening of laser melting deposited 12CrNi2 alloy steel by enhanced plasma carburizing via hollow cathode discharge10.1016/j.surfcoat.2020.125976 ↗
12. Microstructure and Mechanical Properties of Gear Steels After High Temperature Carburization10.1016/S1006-706X(13)60227-7 ↗
13. Preparation of Metakaolin Based Geopolymer and Its Three-dimensional Pore Structural Characterization10.1007/s11595-015-1187-5 ↗
14. Double Glow Plasma Hydrogen-Free Carburizing on the Surface of Purity Titanium10.4028/www.scientific.net/AMR.314-316.108 ↗
15. Suppression of hydrogen absorption into 304L austenitic stainless steel by surface low temperature gas carburizing treatment10.1016/j.ijhydene.2019.07.112 ↗
16. Carbothermal Reduction of Titania in Different Gas Atmospheres10.1007/s11663-008-9205-z ↗
17. Improving the Wear Resistance of VT22 Titanium Alloy by Anodic Plasma Electrolytic Boriding10.3103/S1068375521040098 ↗
18. Effect of surface nanocrystallization on low-temperature gas carburization for AISI 316L austenitic stainless steel10.1016/j.ijpvp.2020.104053 ↗
19. Microstructure and Wear Resistance of Low Pressure Nitrided Layer on TC4 Titanium Alloy Surface
20. Characteristics of surface layers on Ti6Al4V alloy borided with CeO2 near the transition temperature10.1016/j.jallcom.2018.07.365 ↗
21. Influence of nickel silicides presence on hardness, elastic modulus and fracture toughness of gas-borided layer produced on Nisil-alloy10.1016/S1003-6326(21)65537-1 ↗
22. Microstructure, growth kinetics and some mechanical properties of boride layers produced on pure titanium by molten-salt boriding10.1007/s11665-017-2884-3 ↗
23. Influence of niobium and molybdenum addition on microstructure and wear behavior of laser-borided layers produced on Nimonic 80A-alloy10.1016/S1003-6326(19)64942-3 ↗
24. Characteristics and wear performance of borided Ti6Al4V alloy10.1016/j.surfcoat.2008.03.011 ↗
25. Equal channel angular extrusion of TB2 alloy under different die designs by finite element method10.1016/S1875-5372(14)60128-4 ↗
26. Quasi-static and dynamic forced shear deformation behaviors of Ti-5Mo-5V-8Cr-3Al alloy10.1016/j.msea.2017.03.005 ↗
27. Surface characterization and diffusion model of pack borided TB2 titanium alloy10.1016/j.ceramint.2018.07.060 ↗
28. Effects of La2O3 on electrolytic boronising of titanium10.1179/1743294414Y.0000000358 ↗
29. Effect of RE on accelerating the kinetics of boride layer growth on titanium alloy10.1016/j.jallcom.2020.156091 ↗
30. Experimental investigations of TB2 alloy by pack boriding with rare-earth oxides10.1080/09500839.2019.1587182 ↗
31. Corrosion and wear properties of TB2 titanium alloy borided by pack boriding with La2O310.1016/S1003-6326(22)65839-4 ↗
32. Surface modification of titanium alloys for combined improvements in corrosion and wear resistance10.1016/S0257-8972(98)00580-5 ↗
33. Enhancing the wear resistance of a cemented carbide/titanium alloy under magnetofluid lubrication via the magnetic response
34. Advanced ferrogels with high magnetic response and wear resistance using carbon nanotubes
35. The influence of plasma nitriding on microstructure and properties of CrN and CrNiN coatings on Ti6Al4V by magnetron sputtering10.1016/j.vacuum.2016.11.033 ↗
36. Characterization and in vitro biocompatibility study of Ti-Si-N nanocomposite coatings developed by using physical vapor deposition
37. In-Situ fabrication of gradient titanium oxide ceramic coating on laser surface textured Ti6Al4V alloy with improved mechanical property and wear performance10.1016/j.vacuum.2020.109327 ↗
38. Bio-tribology properties of imitation shark skin morphology on Ti6A14V surface
39. Feasibility study of micro-groove cross hatched surface texturing on Ti6Al4V for improved biotribological performance in metal-onpolymer hip implant10.1080/17515831.2019.1606582 ↗
40. Debris trapping and space-varying contact via surface texturing for enhanced noise performance10.1016/j.wear.2017.11.013 ↗
41. Tribological behaviour of textured titanium under abrasive wear10.1080/02670844.2018.1512233 ↗
42. Tribological properties of dimple-textured titanium alloys under dry sliding contact10.1016/j.surfcoat.2016.11.045 ↗
43. A tribological study of the petaloid surface texturing for Co-Cr-Mo alloy artificial joints10.1016/j.apsusc.2015.01.215 ↗
44. The combined effect of surface texturing and DLC coating on the functional properties of internal combustion engines10.1016/j.triboint.2018.06.034 ↗
45. Effect of laser surface texturing(LST) on tribological behavior of double glow plasma surface zirconizing coating on Ti6Al4V alloy10.1016/j.surfcoat.2019.04.038 ↗
46. Investigation of friction and vibration performance of lithium complex grease containing nano-particles on rolling bearing10.1016/j.triboint.2020.106761 ↗
47. On enhancing wear resistance of titanium alloys by laser cladded WC-Co composite coatings10.1016/j.ijrmhm.2022.105902 ↗
48. Superior extreme pressure properties of different layer LDH nanoplatelets used as boundary lubricants10.1016/j.apsusc.2020.147203 ↗
49. Enhancing wear-resistance of Cu nanowires filled polyetheretherketone-based composites under water lubrication conditions via magnetic response to tribofilm10.1016/j.triboint.2020.106601 ↗
50. Evaluation of MQL broaching AISI 1045 steel with sesame oil containing nano-particles under best concentration10.1016/j.jclepro.2021.128888 ↗
51. A new approach of the Oliver and Pharr model to fit the unloading curve from instrumented indentation testing10.1557/jmr.2017.120 ↗
52. Controllable synthesis and friction reduction of ZnFe2O4@C microspheres with diverse core-shell architectures10.1016/j.triboint.2020.106614 ↗
53. Evolution behavior of liquid film in the heataffected zone of laser cladding non-weldable nickel-based superalloy10.1016/j.jallcom.2020.158463 ↗
54. Laser surface remelting of plasma sprayed nanostructured Al2O3-13wt%TiO2 coatings on titanium alloy10.1016/j.jallcom.2010.04.215 ↗
55. The select of internal architecture for porous Ti alloy scaffold: A compromise between mechanical properties and permeability10.1016/j.matdes.2020.108754 ↗
56. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
57. 3DPrinted Topological MoS2/MoSe2 Heterostructures for Macroscale Superlubricity10.1021/acsami.1c09524 ↗
58. Optimization of bionic textured parameter to improve the tribological performance of AISI 4140 self-lubricating composite through response surface methodology10.1016/j.triboint.2021.107104 ↗
59. Bioinspired Smart Coating with Superior Tribological Performance10.1021/acsami.7b03986 ↗
60. PTFE Tribology and the Role of Mechanochemistry in the Development of Protective Surface Films10.1021/acs.macromol.5b00452 ↗
61. Chemisorption mechanism of defluorinated fluorine on bcc Fe surface during formation of PTFE transfer film10.1016/j.apsusc.2021.150777 ↗
62. Improved the elevated temperature mechanical properties of Al-Si alloy deposited with Al-Si coating by magnetron sputtering10.1016/j.vacuum.2018.01.013 ↗
63. The plasma characteristics in high power pulsed impulsed magnetron sputtering (hipims) and its effect on films properties
64. Structure and tribological behavior of chromium-carbon coatings obtained by magnetron sputtering10.1134/S0031918X1902008X ↗
65. A significant improvement of the wear resistance of Ti-6Al-4V alloy by a combined method of magnetron sputtering and plasma electrolytic oxidation (PEO)10.1016/j.surfcoat.2018.12.025 ↗
66. Effect of roughness on electrochemical and pitting corrosion of Ti-6Al-4V alloy in 12 wt.% HCl solution at 35 °C10.1016/j.jmrt.2019.11.044 ↗
67. Improvement of high temperature oxidation resistance of micro arc oxidation coated AlTiNbMo0.5Ta0.5Zr high entropy alloy10.1016/j.matlet.2019.127192 ↗
68. Growth mechanisms of Ca- and P-richMAO films in Ti-15Zr-xMo alloys for osseointegrative implants10.1016/j.surfcoat.2018.02.099 ↗
69. Synthesis, corrosion, and wear resistance of a black microarc oxidation coating on pure titanium10.1016/j.surfcoat.2020.125454 ↗
70. Wear and coating removal mechanism of alumina/titania nanocomposite layer fabricated by plasma electrolysis10.1016/j.surfcoat.2011.02.058 ↗
71. Fabrication and wear resistance of hard micro arc oxidation coatings on Ti alloys
72. Characterization of plasma electrolytic oxidation film on biomedical high niobiumcontaining β-titanium alloy10.1016/j.surfcoat.2018.08.025 ↗
73. Correlations between the growth mechanism and properties of micro-arc oxidation coatings on titanium alloy: Effects of electrolytes10.1016/j.surfcoat.2017.03.021 ↗
74. Characterization of oxide films produced by plasma electrolytic oxidation of a Ti-6Al-4V alloy10.1016/S0257-8972(00)00719-2 ↗
75. Control of the physical properties of anodic coatings obtained by plasma electrolytic oxidation on Ti6Al4V alloy10.1016/j.surfcoat.2015.10.052 ↗
76. Characterization of ta-C film on micro arc oxidation coated titanium alloy in simulated seawater10.1016/j.diamond.2021.108483 ↗