Microstructure, Mechanical Properties, and Reinforcement Mechanism of Second-Phase Reinforced TiC-Based Composites: A Review
Source abstract
Abstract
TiC ceramics have the characteristics of high melting point and density, and titanium reserves on earth are extremely large; therefore, TiC ceramics are considered ultra-high temperature materials with great research value. However, the development of TiC-based ultra-high temperature composites has been seriously hindered by their poor mechanical properties. At present, improvement of the mechanical properties of TiC is mainly accomplished by adding a second phase. In this paper, the research status of modified elements-, nitrides-, and metal-reinforced TiC matrix composites is presented. The microstructure, phase composition, and toughening mechanism of TiC matrix composites reinforced by a second phase are described. The influence of the reaction products on the matrix during the toughening process is also discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Metallurgical Engineering, Anhui University of Technology, Maanshan 243002, China
School of Civil Engineering and Architecture, Anhui University of Technology, Maanshan 243002, China
Funding
Anhui Province Science Foundation for Excellent Young Scholars · National Natural Science Foundation of China
References (78)
Show source-provided references
1. Microstructure, mechanical properties, and reinforcement mechanism of carbide toughened ZrC-based ultra-high temperature ceramics: A review
2. Microstructure and Mechanical Properties of CaAl12O19 reinforced Al2O3-Cr2O3 composites10.1016/j.jeurceramsoc.2021.08.024 ↗
3. Oxidation protection of tungsten alloys for nuclear fusion applications: A comprehensive review10.1016/j.jallcom.2021.161057 ↗
4. Fu, T., Shen, F., Zhang, Y., Yu, L., Cui, K., Wang, J., and Zhang, X. (2022). Oxidation protection of high-temperature coatings on the surface of Mo-Based alloys-A Review. Coatings, 12.10.3390/coatings12020141 ↗
5. A novel ZrB2–VB2–ZrC composite fabricated by reactive spark plasma sintering10.1016/j.msea.2018.06.008 ↗
6. Phase evolution during spark plasma sintering of novel Si3N4-doped TiB2–SiC composite10.1016/j.matchar.2018.08.043 ↗
7. Reactive spark plasma sintering of TiB2-SiC-TiN novel composite10.1016/j.ijrmhm.2019.02.022 ↗
8. Co-reinforcing of mullite-TiN-CNT composites with ZrB2 and TiB2 compounds10.1016/j.ceramint.2019.07.072 ↗
9. Mao, H., Shen, F., Zhang, Y., Wang, J., Cui, K., Wang, H., Lv, T., Fu, T., and Tan, T. (2021). Microstructure and Mechanical Properties of Carbide Reinforced TiC-Based Ultra-High Temperature Ceramics: A Review. Coatings, 11.10.3390/coatings11121444 ↗
10. Effects of spark plasma sintering temperature on densification, hardness and thermal conductivity of titanium carbide10.1016/j.ceramint.2018.05.071 ↗
11. Microstructure and thermomechanical characteristics of spark plasma sintered TiC ceramics doped with nano-sized WC10.1016/j.ceramint.2018.10.125 ↗
12. Spark plasma sintering of TiC-SiCw ceramics10.1016/j.ceramint.2019.06.236 ↗
13. Ab InitioStudy of Phase Equilibria in TiCx10.1103/PhysRevLett.88.015505 ↗
14. Effect of cooling rate on the nucleation and growth of large TiC particles in Ti-Mo steel10.1016/j.jallcom.2020.153650 ↗
15. First-principles investigation of solution mechanism of C in TM-Si-C matrix as the potential high-temperature ceramics10.1111/jace.18254 ↗
16. Design of TiC nanoparticles and their morphology manipulating mechanisms by stoichiometric ratios: Experiment and first-principle calculation10.1016/j.matdes.2019.107951 ↗
17. Growth Mechanism of TiCx during Self-Propagating High-Temperature Synthesis in an AlTiC System10.1021/cg9010983 ↗
18. Carbide stoichiometry in TiCx and Cu-TiCx produced by self-propagating high-temperature synthesis10.1016/S1359-6462(01)01205-2 ↗
19. Two-way coupled simulation of a flow laden with metallic particulates in overexpanded TIC nozzle10.1016/j.ijheatfluidflow.2009.09.001 ↗
20. Fabrication and characteristics of a HfC/TiC multilayer coating by a vacuum plasma spray process to protect C/C composites against oxidation10.1016/j.corsci.2020.109068 ↗
21. Preparation, mechanical properties and enhanced wear resistance of TiC-Fe composite cermet coating10.1016/j.ijrmhm.2021.105672 ↗
22. Spark plasma sintering of TiC ceramic with tungsten carbide as a sintering additive10.1016/j.jeurceramsoc.2013.04.017 ↗
23. Microstructure and mechanical properties of TiC-TiB2 composite cermet tool materials at ambient and elevated temperature10.1016/j.ceramint.2015.10.165 ↗
24. Investigation of morphology and texture properties of WSi2 coatings on W substrate based on contact-mode AFM and EBSD10.1016/j.surfcoat.2020.125966 ↗
25. Development of a processing route for carbon allotrope-based TiC porous nanocomposites10.1016/j.jeurceramsoc.2017.04.016 ↗
26. Preparation of TiC ceramics from hot Ti-bearing blast furnace slag: Carbothermal reduction, supergravity separation and spark plasma sintering10.1016/j.jeurceramsoc.2021.12.047 ↗
27. Improvement in mechanical/physical properties of TiC-based ceramics sintered at 1500 °C for inert matrix fuels10.1016/j.scriptamat.2015.11.024 ↗
28. Preparation of high-purity TiSi2 and eutectic Si-Ti alloy by separation of Si-Ti alloy for clean utilization of Ti-bearing blast furnace slag10.1016/j.seppur.2021.118473 ↗
29. The Ti3SiC2 Maxphases as promising materials for high temperature applications: Formation under various synthesis conditions10.1016/j.matchemphys.2021.124625 ↗
30. Preparation and properties of reactive plasma sprayed TiC-Ti5Si3-Ti3SiC2/Al coatings from Ti-Si-C-Al mixed powders10.1016/j.matchemphys.2021.124772 ↗
31. Microstructure evolution and growth mechanism of Si-MoSi2 composite coatings on TZM (Mo-0.5Ti-0.1Zr-0.02 C) alloy10.1016/j.jallcom.2021.162403 ↗
32. Temperature dependent photoluminescence of surfactant assisted electrochemically synthesized ZnSe nanostructures10.1016/j.jallcom.2018.11.375 ↗
33. Synthesis of Ti3SiC2from TiC and Si and its toughening mechanism with incorporated carbon fibers10.1016/j.ceramint.2021.06.038 ↗
34. Fabrication of in situ elongated β-Sialon grains bonded to tungsten carbide via two-step spark plasma sintering10.1016/j.ceramint.2021.06.154 ↗
35. Improving oxidation resistance of TZM alloy by deposited Si-MoSi2 composite coating with high silicon concentration10.1016/j.ceramint.2022.04.080 ↗
36. Study on repairing mechanism of wind quenching slag powder in heavy metal contaminated soil by XRD and SEM
37. Solid solution formation during spark plasma sintering of ZrB2-TiC-graphite composites10.1016/j.ceramint.2019.09.287 ↗
38. Beneficial role of carbon black on the properties of TiC ceramics10.1016/j.ceramint.2020.06.125 ↗
39. Mechanism analysis of formaldehyde degradation by hot braised slag modified activated carbon based on XRF and XRD
40. Strengthening of TiC ceramics sintered by spark plasma via nano-graphite addition10.1016/j.ceramint.2020.01.291 ↗
41. Evolution of surface morphology, roughness and texture of tungsten disilicide coatings on tungsten substrate10.1016/j.vacuum.2021.110297 ↗
42. Microstructure and oxidation resistance of Si-MoSi2 ceramic coating on TZM (Mo-0.5Ti-0.1Zr-0.02C) alloy at 1500 °C10.1016/j.surfcoat.2021.128037 ↗
43. Microstructural, mechanical and friction properties of nano-graphite and h-BN added TiC-based composites10.1016/j.ceramint.2020.08.068 ↗
44. Physical, mechanical and microstructural characterization of TiC-ZrN ceramics10.1016/j.ceramint.2020.05.292 ↗
45. Densification enhancement of spark plasma sintered TiB2 ceramics with low content AlN additive10.1016/j.ceramint.2020.05.278 ↗
46. Influence of the Gangue Compositions on the Reduction Swelling Index of Hematite Briquettes10.1007/s11663-021-02177-8 ↗
47. Spectroscopic analysis of activated carbon mixed with steel slag composite material in sintering flue gas of desulfurization and denitration
48. A novel spark plasma sintered TiC-ZrN-C composite with enhanced flexural strength10.1016/j.ceramint.2020.08.073 ↗
49. MicroRNA-16 via Twist1 inhibits EMT induced by PM2.5 exposure in human hepatocellular carcinoma10.1515/med-2019-0078 ↗
50. TiC-modified CNTs as reinforcing fillers for isotropic graphite produced from mesocarbon microbeads10.1016/j.carbon.2021.10.037 ↗
51. Spectroscopic analysis of reinforcing-flame retardant mechanism of modified steel slag-mineral powder composite rubber filler
52. Study on preparation stage and mechanism of modified desulfurization ash-based eco rubber by X-ray diffraction
53. Characterization of spark plasma sintered TiC-Si3N4ceramics10.1016/j.ijrmhm.2020.105444 ↗
54. Investigation of AlN addition on the microstructure and mechanical properties of TiB2 ceramics10.1016/j.ceramint.2019.05.196 ↗
55. Characterization of TaC-based fibrous-monolithic ceramics made of fibers with different core/shell volume ratios and orientations10.1016/j.msea.2020.138935 ↗
56. Study on composite activating mechanism of alkali steel slag cementations materials by XRD and FTIR10.1039/D3JA00222E ↗
57. Microstructural and mechanical characterization of spark plasma sintered TiC ceramics with TiN additive10.1016/j.ceramint.2020.04.215 ↗
58. Mechanical and wear properties of TiN films on differently pretreated TiCN-based cermets10.1016/j.apsusc.2021.151180 ↗
59. Mechanical damage-free surface planarization of single-crystal diamond based on carbon solid solution into nickel10.1016/j.diamond.2021.108390 ↗
60. Study on reinforcement mechanism of composite rubber using modified desulfurization ash replacing partial carbon black by FTIR and XRD
61. Strengthening of novel TiC-AlN ceramic with in-situ synthesized Ti3Al intermetallic compound10.1016/j.ceramint.2020.02.213 ↗
62. Effect of interface on mechanical properties and formability of Ti/Al/Ti laminated composites10.1016/j.jmrt.2021.07.021 ↗
63. In-situ formation of TiN during the hot-pressing of TiC-AlN ceramics10.1016/j.ceramint.2021.04.074 ↗
64. Effective separation and recovery of valuable metals from waste Ni-based batteries: A comprehensive review10.1016/j.cej.2022.135767 ↗
65. Plasma spraying Ti-Al-C based composite coatings from Ti/Al/graphite agglomerates: Synthesis, characterization and reaction mechanism10.1016/j.vacuum.2022.111036 ↗
66. Effect of Ti and Al ratio on glass forming ability and crystallization behavior of Zr-Cu-Al-Ti alloy powders10.1016/j.tca.2022.179163 ↗
67. Nanocrystalline matrix TiC-Al3Ti and TiC-Al3Ti-Al composites produced by reactive hot-pressing of milled powders10.1016/j.apt.2014.02.014 ↗
68. Effect of Ni addition on the densification of TiC: A comparative study of conventional and microwave sintering10.1016/j.ijrmhm.2019.105165 ↗
69. A novel fabrication technique of toughened TiC-based solid solution cermets using mechanochemical synthesis10.1007/s10853-020-04939-2 ↗
70. Sintering, mechanical, and oxidation properties of TiC-Ni-Mo cermets obtained from ultra-fine TiC powders10.1016/j.jallcom.2018.04.124 ↗
71. Influence of Mo contents on microstructures and mechanical properties of (Ti,W,Mo)(CN)-Ni cermets10.1016/j.ceramint.2018.11.236 ↗
72. Deposition of Ti-Zr-O-N films by reactive magnetron sputtering of Zr target with Ti ribbons10.1016/j.surfcoat.2020.126737 ↗
73. Role of nano-diamond addition on the characteristics of spark plasma sintered TiC ceramics10.1016/j.diamond.2020.107828 ↗
74. Synergistic effects of Si3N4 and CNT on densification and properties of TiC-based ceramics10.1016/j.ceramint.2021.01.157 ↗
75. The effect of hydroxyapatite nanoparticles on electrochemical and mechanical performance of TiC/N coating fabricated by plasma electrolytic saturation method10.1016/j.surfcoat.2020.125817 ↗
76. A microstructural approach to the chemical reactions during the spark plasma sintering of novel TiC-BN ceramics10.1016/j.ceramint.2020.03.148 ↗
77. TiC-Al composites with nanocrystalline matrix produced by consolidation of milled powders10.1016/j.apt.2014.03.018 ↗
78. Sintering, mechanical, electrical and oxidation properties of ceramic intermetallic TiC-Ti3Al composites obtained from nano-TiC particles10.1016/j.ceramint.2016.03.102 ↗