Modulation of Thermal Insulation and Mechanical Property of Silica Aerogel Thermal Insulation Coatings
Source abstract
Abstract
In this paper, high-performance silica aerogel (SiO2 aerogel) thermal insulation coatings were obtained and profited from the excellent thermal insulation capability of SiO2 aerogel. The comprehensive properties and thermal insulation mechanism of the coatings were investigated via Scanning Electron Microscope (SEM), Fourier Transform Infrared Spectroscopy (FT-IR), contact angle, and temperature difference tests. Results showed that there was a contradiction between thermal insulation and mechanical property in this coating after the addition amount and proportion of silica aerogel, hollow glass microsphere, glass fibers, aqueous acrylic emulsion, and dispersing agents were optimized carefully. When the mass ratio of hollow glass to SiO2 aerogel microspheres was 1:1, the overall performance of the coating was the best with thermal conductivity of 0.050 W/(m·K) and adhesive strength of 1024 kPa.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aerogels and thermal insulation · Surface Modification and Superhydrophobicity · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
CNOOC Energy Technology & Servicers Limited Key Laboratory of Corrosion Protection for Offshore Oil Industry, Changzhou 213016, China
CNOOC Changzhou Paint & Coating Industry Research Institute Co., Ltd., Changzhou 213016, China
Department of Materials Science, Fudan University, Shanghai 200082, China
Funding
Key Projects of CNOOC Energy Development Co., Ltd. · Changzhou Leading Innovative Talents Introduction and Cultivation Project · Jiangsu Postdoctoral Research Funding Program
References (38)
Show source-provided references
1. Heat recovery optimization in a Steam-Assisted Gravity Drainage (SAGD) plant10.1016/j.energy.2016.06.006 ↗
2. Energy efficiency and emissions intensity of SAGD10.1016/j.fuel.2013.07.073 ↗
3. A materials science perspective of midstream challenges in the utilization of heavy crude oil10.1021/acsomega.1c06399 ↗
4. Evaluation of steam circulation strategies for SAGD startup10.2118/143655-PA ↗
5. Detection of corrosion under insulation on aerospace structures via pulsed eddy current thermography10.1016/j.ast.2021.107317 ↗
6. Research on thermal performance and hygrothermal behavior of timber-framed walls with different external insulation layer: Insulation Cork Board and anti-corrosion pine plate10.1016/j.jobe.2019.101069 ↗
7. Corrosion of new-generation steel in outer oil pipeline environments10.1007/s11665-016-2404-x ↗
8. The effect of corrosion on the structural reliability of steel offshore structures10.1016/j.corsci.2005.04.004 ↗
9. Design features of offshore oil production platforms influence their susceptibility to biocorrosion10.1007/s00253-017-8356-8 ↗
10. Role of asphaltene and resin in oil field emulsions10.1016/S0920-4105(99)00024-8 ↗
11. Development of thermal insulating materials on natural base for thermal insulation systems10.1016/j.proeng.2013.04.162 ↗
12. Comparison of the thermal properties of different insulating materials10.4028/www.scientific.net/AMR.899.381 ↗
13. Progress in thermal insulation coatings
14. Thermal conductivity of silica aerogel thermal insulation coatings10.1007/s10765-019-2565-6 ↗
15. Quantitative analysis of silica aerogel-based thermal insulation coatings10.1016/j.porgcoat.2015.07.019 ↗
16. Improving thermal insulation of TC4 using YSZ-based coating and SiO2 aerogel10.1016/j.pnsc.2015.03.006 ↗
17. Dispersion properties of aerogel slurry and application of its coatings in thermal insulation engineering
18. Negative thermal expansion HfV2O7 nanostructures for alleviation of thermal stress in nanocomposite coatings10.1021/acsami.1c10867 ↗
19. Development of silica aerogel and hollow glass microspheres based heat-insulating coatings
20. Effects of infrared opacifiers on properties of silicate thermal insulating coatings
21. Hydrophobic composite aerogels with high mechanical strength and low high-temperature thermal conductivities10.1021/jp804855v ↗
22. Preparation and studies on the interaction at the organic-inorganic interface of KH550 modified SiO2
23. FTIR studies of nitrogen doped carbon nanotubes10.1016/j.diamond.2005.08.013 ↗
24. Thermal insulation coatings containing sepiolite mineral fibers and their performance10.4028/www.scientific.net/AMR.178.318 ↗
25. Advances in effect of fiber species on improving mechanical and thermal insulation properties of silica aerogel
26. Mechanical property of silica aerogels reinforced with isocyanate
27. Synthesis and characterization of SiO2 composite aerogels enhanced by the self growing nano-fibers
28. He, P., Ruan, H.D., Wang, C.Y., and Lu, H. (2021). Mechanical properties and thermal conductivity of thermal insulation board containing recycled thermosetting polyurethane and thermoplastic. Polymers, 13.10.3390/polym13244411 ↗
29. Facile synthesis silica aerogel composites via ambient-pressure drying without surface modification or solvent exchange10.1016/j.vacuum.2019.109117 ↗
30. Preparation and characterization of glass fiber/polyimide/sio2 composite aerogels with high specific surface area10.1007/s10853-018-2553-4 ↗
31. Corrosion resistance of chromium-containing refractories in molten alkali-free borosilicate glass E10.1007/s11148-016-9926-5 ↗
32. Guo, J.Y., Deng, X.H., Wang, H.Z., and Zhou, L.Y. (2021). Modeling and simulation of vacuum low pressure carburizing process in gear steel. Coatings, 11.10.3390/coatings11081003 ↗
33. A Molecular dynamics study of the thermal conductivity of nanoporous silica aerogel, obtained through negative pressure rupturing10.1016/j.jnoncrysol.2012.03.007 ↗
34. A study of the effects of pigments and fillers on the properties of anticorrosive paints10.1108/03699420610652377 ↗
35. A study on the thermal performance of exterior walls covered with a recently patented silica-aerogel-based insulating coating10.1016/j.buildenv.2014.06.017 ↗
36. Liu, T.W., Wang, Z., Li, G.Z., Shi, G.P., and Zhao, X. (2018, January 1–4). Mechanical properties and thermal conductivity of lightweight thermal insulation composites. Proceedings of the IOP Conference Series: Materials Science and Engineering, Xi’an, China.10.1088/1757-899X/474/1/012038 ↗
37. Xing, Z., Ke, H., Wang, X., Zheng, T., Qiao, Y., Chen, K., Zhang, X., Zhang, L., Bai, C., and Li, A.Z. (2020). Investigation of the thermal conductivity of resin-based lightweight composites filled with hollow glass microspheres. Polymers, 12.10.3390/polym12030518 ↗
38. Laboratory tests with liquid nano-ceramic thermal insulation coating10.1016/j.proeng.2015.10.059 ↗