A Comprehensive Review of Cathodic Arc Evaporation Physical Vapour Deposition (CAE-PVD) Coatings for Enhanced Tribological Performance
Source abstract
Abstract
In the realm of industries focused on tribology, such as the machining industry, among others, the primary objective has been tribological performance enhancement, given its substantial impact on production cost. Amid the variety of tribological enhancement techniques, cathodic arc evaporation physical vapour deposition (CAE-PVD) coatings have emerged as a promising solution offering both tribological performance enhancement and cost-effectiveness. This review article aims to systematically present the subject of CAE-PVD coatings in light of the tribological performance enhancement. It commences with a comprehensive discussion on substrate preparation, emphasizing the significant effect of substrate roughness on the coating properties and the ensuing tribological performance. The literature analysis conducted revealed that optimum tribological performance could be achieved with an average roughness (Ra) of 0.1 µm. Subsequently, the article explores the CAE-PVD process and the coating’s microstructural evolution with emphasis on advances in macroparticles (MPs) formation and reduction. Further discussions are provided on the characterization of the coatings’ microstructural, mechanical, electrochemical and tribological properties. Most importantly, crucial analytical discussions highlighting the impact of deposition parameters namely: arc current, temperature and substrate bias on the coating properties are also provided. The examination of the analyzed literature revealed that the optimum tribological performance can be attained with a 70 to 100 A arc current, a substrate bias ranging from −100 to −200 V and a deposition temperature exceeding 300 °C. The article further explores advancements in coating doping, monolayer and multilayer coating architectures of CAE-PVD coatings. Finally, invaluable recommendations for future exploration by prospective researchers to further enrich the field of study are also provided.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Applied Science, University of Quebec at Chicoutimi, Saguenay, QC G7H 2B1, Canada
DK SPEC Company, 1060, Chemin Olivier, St.-Nicolas, Levis, QC G7A 2M8, Canada
Department of Mechanical Engineering, École de Technologie Superieure (ETS), Montreal, QC H3C 1K3, Canada
Funding
Natural Sciences and Engineering Research Council of Canada
References (100+)
Show source-provided references
1. Muhammed, M., Javidani, M., Heidari, M., and Jahazi, M. (2023). Enhancing the Tribological Performance of Tool Steels for Wood-Processing Applications: A Comprehensive Review. Metals, 13.10.3390/met13081460 ↗
2. Implications of cryogenic treatment on microstructure, phase formation, mechanical and tribological properties of tungsten carbide cutting bits with varying cobalt content for mining applications10.1016/j.ijrmhm.2023.106421 ↗
3. Investigation of the Tribological and Mechanical Properties of Boron Steels in Terms of Potential Usage in Agricultural Applications
4. Multilayer coatings on tools for woodworking10.1016/j.wear.2011.05.048 ↗
5. Hard coatings for woodworking tools--a review
6. The influence of technical characteristics of wood milling tools on its wear performance10.1007/s10086-017-1656-x ↗
7. A review of tribological properties and deposition methods for selected hard protective coatings10.1016/j.triboint.2022.107919 ↗
8. Topographical orientation effects on friction and wear in sliding DLC and steel contacts, part 1: Experimental10.1016/j.wear.2015.02.014 ↗
9. Boriding temperature effect on micro-abrasion wear resistance of borided tool steel10.1115/1.4044859 ↗
10. Warcholinski, B., and Gilewicz, A. (2022). Surface Engineering of Woodworking Tools, a Review. Appl. Sci., 12.10.3390/app122010389 ↗
11. Effect of Single and Double Austenitization Treatments on the Microstructure and Hardness of AISI D2 Tool Steel10.1016/j.matpr.2015.07.145 ↗
12. Heidari, M. (2019). Improvement of the Cutting Tool Life for the Primary Transformation of Wood. [Ph.D. Thesis, Laval University].
13. Effects of deep cryogenic treatment on microstructure, impact toughness and wear resistance of an AISI D6 tool steel10.1016/j.wear.2020.203382 ↗
14. Performance of cryogenically treated HSS tools10.1016/j.wear.2006.01.017 ↗
15. Cryogenic Treatment of Metal—A Review10.1016/j.matpr.2018.10.324 ↗
16. Lowcost automated control for steel heat treatments10.1016/j.applthermaleng.2016.11.177 ↗
17. Evaluation of factors influencing deep cryogenic treatment that affect the properties of tool steels
18. Wear analysis of treated Duplex Stainless Steel material by carburizing process—A review10.1016/j.matpr.2020.02.608 ↗
19. Innovative anti-wear coatings on cutting tools for wood machining10.1016/j.surfcoat.2006.06.013 ↗
20. Microstructure and tribological behaviour of liquid nitrocarburised tool steels10.1016/S0257-8972(02)00566-2 ↗
21. Taguchi Optimization and Flame Hardening Experimental Investigation on Eglin Steel10.1088/1757-899X/988/1/012099 ↗
22. Effect of Microstructure on Hardness and Wear Properties of 45 Steel after Induction Hardening10.1002/srin.202000540 ↗
23. Electron beam surface treatment of tool steels10.1016/j.vacuum.2016.10.022 ↗
24. Optimization of Shot Peening Effective Parameters on Surface Hardness Improvement10.1007/s12540-020-00758-x ↗
25. Prabhudev, K.H. (1988). Handbook of Heat Treatment of Steels, Tata McGraw_Hill Education.
26. Thomas, G.W.G., Digges, G., and Rosenberg, S.J. (1966). Heat Treatment and Properties of Iron and Steel.
27. Influence of chromium content on the dry machining performance of cathodic arc evaporated TiAlN coatings10.1016/S0043-1648(02)00290-9 ↗
28. On the cutting of wood for joinery applications10.1177/0954405414534431 ↗
29. Quality Evaluation of the Coatings and Its Influence on the Wood Machining Tool Wear
30. Cutting with coated tools: Coating technologies, characterization methods and performance optimization10.1016/j.cirp.2012.05.006 ↗
31. Holmberg, K., and Mathews, A. (2009). Coatings Tribology—Properties, Mechanisms, Techniques and Application in Surface Engineering, Elsevier. [2nd ed.].
32. Enhancement of toughness and wear resistance by CrN/CrCN multilayered coatings for wood processing10.1016/j.surfcoat.2018.03.027 ↗
33. Performance of PVD AlTiCrN coating during machining of austenitic stainless steel10.1179/1743294413Y.0000000130 ↗
34. Effect of substrate surface roughness on the characteristics of CrN hard film10.1016/0254-0584(95)01636-9 ↗
35. Mattox, D.M. (2007). Handbook of Physical Vapor Deposition (PVD) Processing, Elsevier Science & Technology Books.
36. Baptista, A., Silva, F.J.G., Porteiro, J., Míguez, J.L., and Pinto, G. (2018). Sputtering Physical Vapour Deposition (PVD) Coatings: A Critical Review on Process Improvement and Market Trend Demands. Coatings, 8.10.3390/coatings8110402 ↗
37. Physical vapor deposition technology for coated cutting tools: A review10.1016/j.ceramint.2020.04.168 ↗
38. Tool coatings for wood machining: Problems and prospects
39. Effect of ultrasonic peening on the surface properties of nano-layered CrN/CrAlN coating deposited by CAPVD method on D3 tool steel10.1016/j.surfin.2021.101618 ↗
40. Jacob, A. (2015). Effect of Micro-blasting on Characteristics and Machining Performance of PVD AlTiN Coated Cutting Tools, National Institute of Technology. Master of Technology.
41. Grundas, S. (2011). Advances in Induction and Microwave Heating of Mineral and Organic Materials, IntechOpen.10.5772/562 ↗
42. Improving the mechanical and anti-wear properties of AlTiN coatings by the hybrid arc and sputtering deposition10.1016/j.surfcoat.2019.125022 ↗
43. Effect of C doping on structure and properties of TiAlCrN coatings by filter cathode vacuum arc deposition10.1016/j.vacuum.2022.111093 ↗
44. Multilayer coatings for improved performance10.1016/0257-8972(94)02407-3 ↗
45. Cathodic arc plasma deposition
46. Review of cathodic arc deposition technology at the start of the new millennium10.1016/S0257-8972(00)00879-3 ↗
47. Investigation of the structure and phase composition of the microdroplets formed during the deposition of PVD coatings10.1016/j.surfcoat.2022.128574 ↗
48. Warcholinski, B., Gilewicz, A., Myslinski, P., Dobruchowska, E., and Murzynski, D. (2020). Structure and Properties of AlCrN Coatings Deposited Using Cathodic Arc Evaporation. Coatings, 10.10.3390/coatings10080793 ↗
49. Effect of Coating Thickness on the Properties of TiN coatings Deposited on Tool Steels Using Cathodic Arc PVD Technique10.1142/S0218625X08011524 ↗
50. Reduction of droplet emission in random arc technology10.1016/0257-8972(91)90150-U ↗
51. Reducing the macroparticle content of cathodic arc evaporated TiN coatings10.1016/j.surfcoat.2003.08.086 ↗
52. Deposition of chromium nitride coatings using vacuum arc plasma in increased negative substrate bias voltage10.1016/j.vacuum.2015.04.008 ↗
53. Specific features of the structure and properties of arc-PVD coatings depending on the spatial arrangement of the sample in the chamber10.1016/j.vacuum.2022.111047 ↗
54. Investigation of the influence of the features of the deposition process on the structural features of microparticles in PVD coatings10.1016/j.vacuum.2022.111144 ↗
55. An analysis of macroparticle-related defects on CrCN and CrN coatings in dependence of the substrate bias voltage10.1016/j.vacuum.2011.04.023 ↗
56. effect of arc current on mechanical properties of alcrn coatings deposited using cathodic arc evaporation
57. Cathodic arc evaporation as a coating technique10.1179/sur.1988.4.4.335 ↗
58. Gotman, I., and Gutmanas, E.Y. (2014). Titanium nitride-based coatings on implantable medical devices. Adv. Biomater. Devices Med., 53–73.
59. Ferreira, A.A., Silva, F.J.G., Pinto, A.G., and Sousa, V.F.C. (2021). Characterization of thin chromium coatings produced by pvd sputtering for optical applications. Coatings, 11.10.3390/coatings11020215 ↗
60. Internal stresses in PVD coated tool composites10.1515/amm-2016-0225 ↗
61. Microstructural evolution during film growth10.1116/1.1601610 ↗
62. Effect of surface finishing such as sand-blasting and CrAlN hard coatings on the cutting edge’s peeling tools’ wear resistance10.1016/j.wear.2009.01.045 ↗
63. Experimental study of tribological and mechanical properties of TiN coating on AISI 52100 bearing steel10.1177/1687814018802882 ↗
64. Effect of substrate bias voltage on the properties of CrCN and CrN coatings deposited by cathodic arc evaporation10.1016/j.vacuum.2012.04.039 ↗
65. Pre-, intermediate, and post-treatment of hard coatings to improve their performance for forming and cutting tools10.1016/j.surfcoat.2015.07.003 ↗
66. Influence of substrate roughness on structure and mechanical property of TiAlN coating fabricated by cathodic arc evaporation10.1016/j.phpro.2011.06.075 ↗
67. Effect of cathodic arc PVD parameters on roughness of TiN coating on steel substrate10.1016/j.cap.2009.07.007 ↗
68. Effect of substrate roughness and PVD deposition temperatures on hardness and wear performance of AlCrN-coated WC-Co10.1016/j.surfcoat.2022.128304 ↗
69. Effect of Substrate Surface Roughness On Adhesion Of Titanium Nitride Coatings Deposited By Physical Vapour Deposition Technique10.1088/1757-899X/981/4/042022 ↗
70. Effect of substrate roughness on adhesion and tribological properties of nc-TiAlN/a-Si3N4 nanocomposite coatings deposited by cathodic arc PVD process10.1179/1743294415Y.0000000005 ↗
71. The effect of droplets in arc evaporated TiAlTaN hard coatings on the wear behavior10.1016/j.surfcoat.2014.01.010 ↗
72. Method and surface roughness aspects for the design of DLC coatings10.1016/j.wear.2005.09.029 ↗
73. Effects of surface roughness of substrate on properties of Ti/TiN/Zr/ZrN multilayer coatings10.1016/S1003-6326(15)63623-8 ↗
74. Nanoindentation and Tribological Behavior of TiN-TiCN-TiAlN Multilayer Coatings on AISI D3 Tool Steel10.1007/s11665-021-06533-2 ↗
75. Improvement of PVD coated inserts cutting performance, through appropriate mechanical treatments of substrate and coating surface10.1016/S0257-8972(01)01485-2 ↗
76. Influence of substrate roughness on the scratch adhesion of titanium nitride coatings10.1016/0257-8972(93)90295-Y ↗
77. Influence of post-deposition annealing temperature on morphological, mechanical and electrochemical properties of CrN/CrAlN multilayer coating deposited by cathodic arc evaporation- physical vapor deposition process10.1016/j.surfcoat.2022.128090 ↗
78. Effects of ceramic-based CrN, TiN, and AlCrN interlayers on wear and friction behaviors of AlTiSiN + TiSiN PVD coatings10.1016/j.ceramint.2021.04.015 ↗
79. Surface effects on the growth, adhesion and properties of reactively deposited hard coatings10.1016/0257-8972(95)02652-5 ↗
80. Ar + H2 plasma etching for improved adhesion of PVD coatings on steel substrates10.1016/j.vacuum.2011.10.028 ↗
81. Reactive sputtering in the ABSTM system10.1016/0257-8972(93)90023-H ↗
82. Microstructure and mechanical properties of Ti-Al-Cr-N films: Effect of current of additional anode10.1016/j.apsusc.2019.04.023 ↗
83. Nanostructured hard coatings deposited by cathodic arc deposition: From concepts to applications10.1016/j.surfcoat.2011.06.015 ↗
84. Twenty-five years of progress in vacuum arc research and utilization10.1109/27.650894 ↗
85. Grosfils, P., and Lutsko, J.F. (2021). Impact of Surface Roughness on Crystal Nucleation. Crystals, 11.10.3390/cryst11010004 ↗
86. Study of The Structure and Properties of Thick Vacuum Condensates of Nickel, Tita-nium, Tungsten, Aluminium Oxide and Zirconium Dioxide
87. Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings10.1116/1.1312732 ↗
88. Engineering with surface coatings: The role of coating microstructure10.1016/0257-8972(89)90065-0 ↗
89. A structure zone diagram including plasma-based deposition and ion etching10.1016/j.tsf.2009.10.145 ↗
90. CrAlN coatings deposited by cathodic arc evaporation at different substrate bias10.1016/j.tsf.2006.01.061 ↗
91. Anders, A. (2008). Cathodic Arc Plasma Deposition: From Fractal Spots to Energetic Condensation, Springer.10.1007/978-0-387-79108-1 ↗
92. Cathodic arc deposition of (Al,Cr)2O3: Macroparticles and cathode surface modifications10.1016/j.surfcoat.2011.09.028 ↗
93. SEM image analysis of droplet formation during metal ion etching by a steered arc discharge10.1016/S0257-8972(97)00137-0 ↗
94. Ti0·33Al0.67 cathode surface modifications and the effect on the mechanical and electrochemical properties of AlTiN coating10.1016/j.vacuum.2016.05.016 ↗
95. Characterisation and performance of partially filtered arc TiAlN coatings10.1016/S0257-8972(01)01448-7 ↗
96. Study of the growth mechanisms of chromium nitride films deposited by vacuum ARC evaporation10.1016/S0040-6090(96)09164-X ↗
97. Transport of plasma streams in a curvilinear plasma-optics system
98. Effects of deposition parameters on the texture of chromium films deposited by vacuum arc evaporation10.1016/S0040-6090(96)08891-8 ↗
99. Effects of nitrogen partial pressure and pulse bias voltage on (Ti,Al)N coatings by arc ion plating10.1016/S0257-8972(02)00895-2 ↗
100. Influence of deposition parameters on hard Cr–Al–N coatings deposited by multi-arc ion plating10.1016/j.apsusc.2011.11.127 ↗