Research and Application Progress of High-Entropy Alloys
Source abstract
Abstract
With the continuous improvement of global technological levels and the increasing demand for high-performance alloy materials in national economic construction, the traditional single principal component alloy is increasingly unable to meet people’s increasing service needs. High-entropy alloys play an important role in aerospace, mechanical manufacturing, biomedicine, energy development and other engineering fields because of their unique physical, chemical and mechanical properties. Based on the concept of high-entropy alloys, the high-entropy effect, lattice distortion effect, sluggish diffusion effect and cocktail effect of high-entropy alloys are represented in this paper. The common preparation methods of high-entropy alloys are summarized according to the classification of melting-casting method, mechanical alloying method and coating method. The strength and toughness, wear resistance, corrosion resistance, high temperature resistance, fatigue resistance, radiation resistance and magnetic properties of the high-entropy alloys are discussed. The application prospect of high-entropy alloys is summarized, and the future research and development direction of high-entropy alloys are prospected on this basis.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Electrical and Control Engineering, Liaoning Technical University, Huludao 125105, China
Intelligent Manufacturing Electronic Assembly Research Institute, Nanchang Institute of Technology, Nanchang 330044, China
Institution of Innovation and Entrepreneurship, Liaoning Institute of Science and Engineering, Jinzhou 121013, China
Funding
Talent Introduction Program of Liaoning Technical University
References (94)
Show source-provided references
1. Mixed-up metals make for stronger, tougher, stretchier alloys10.1038/533306a ↗
2. Research Progress and Prospect of High-Entropy Alloy Materials10.15302/J-SSCAE-2023.03.016 ↗
3. Novel multicomponent amorphous alloys10.4028/www.scientific.net/JMNM.13.27 ↗
4. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
5. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
6. Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-Valloys with multiprincipal metallic elements10.1007/s11661-006-0234-4 ↗
7. Nanostructured high-entropy alloys with multiple principalelements novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
8. Development of high entropy alloys: A review
9. Cr-Mo-V-W: A new refractory and transition metalhigh-entropy alloy system10.1016/j.scriptamat.2018.08.045 ↗
10. Microstructure and mechanical property of a novel ReMoTaW high-entropy alloy with high density10.1016/j.ijrmhm.2018.05.006 ↗
11. Influence of Cr substitution and temperature on hierarchicalphase decomposition in the AlCoFeNi high entropy alloy10.1038/s41598-018-33922-w ↗
12. Phase equilibria, mechanical properties and design of quaternary refractory high entropy alloys10.1016/j.matdes.2018.06.003 ↗
13. Alloying effect on phase stability, elastic and thermodynamic properties of Nb-Ti-V-Zr high entropy alloy10.1016/j.intermet.2018.08.003 ↗
14. Melts of CrCoNi-based high-entropy alloys: Atomic diffusion andelectronic/atomic structure from ab initio simulation10.1063/1.5045216 ↗
15. Recent progress in high entropy alloys10.3166/acsm.31.633-648 ↗
16. Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0218-9 ↗
17. Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0283-0 ↗
18. Thermodynamic analysis of the simple microstructure of AlCrFeNiCu high-entropy alloy with multi-principal elements10.1016/S1006-7191(08)60092-7 ↗
19. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
20. Determination of the transition to the high entropy regime for alloys of refractory elements10.1016/j.jallcom.2012.04.053 ↗
21. Entropy-driven phase stability and slow diffusion kinetics in an Al0.5CoCrCuFeNi high entropy alloy10.1016/j.intermet.2012.07.001 ↗
22. Absence of long-range chemical ordering in equimola FeCoCrNi10.1063/1.4730327 ↗
23. High-Entropy Alloys: A Critical Review10.1080/21663831.2014.912690 ↗
24. Anomalous decrease in X-ray diffraction intensities of CuNiAlCoCrFeSi alloy systems with multi-principal elements10.1016/j.matchemphys.2007.01.003 ↗
25. Physical Properties of high entropy alloys10.3390/e15125338 ↗
26. Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
27. Tracer diffusion in the Ni-CoCrFeMn system: Transitionfrom a dilute solid solution to a high entropy alloy10.1016/j.scriptamat.2018.09.011 ↗
28. Irradiation effects in high entropy alloys and 316H stainless steel at 300 degrees C10.1016/j.jnucmat.2018.08.031 ↗
29. Experimental and numerical studies on the sluggish diffusion in face centered cubic Co-Cr-Cu-Fe-Ni high-entropy alloys10.1016/j.jmst.2018.02.003 ↗
30. Ni tracer diffusion in CoCrFeNi and CoCrFeMnNi highentropy alloys10.1016/j.jallcom.2016.07.239 ↗
31. Interdiffusion in the FCC-structured Al-Co-Cr-Fe-Ni high entropy alloys: Experimental studies and numerical simulations10.1016/j.jallcom.2016.03.046 ↗
32. High thermal stability and sluggish crystallization kinetics of high-entropy bulk metallic glasses10.1063/1.4955060 ↗
33. Alloyed pleasures: Multimetallic cocktails
34. Phase prediction, microstructure and high hardness of novel light-weight high entropy alloys10.1016/j.jmrt.2018.06.010 ↗
35. The role of Nb on the high temperature oxidation behavior of CoCrFeMnNbxNi high-entropy alloys10.1016/j.corsci.2019.07.012 ↗
36. Cu assisted stabilization and nucleation of L12 precipitates in Al0.3CuFeCrNi2fcc-based high entropy alloy10.1016/j.actamat.2017.02.053 ↗
37. Study of the microstructure of high-entropy alloys AlFeCuCoNiCrTix10.4028/www.scientific.net/AMM.66-68.894 ↗
38. Effect of alloying elements on microstructure and properties of multiprincipal elements high-entropy alloys10.1016/j.jallcom.2008.07.124 ↗
39. Effect of rare earth Y addition on the microstructure and mechanical properties of high entropy AlCoCrCuNiTi alloys10.1016/j.matdes.2009.09.016 ↗
40. Effect of aging temperature on microstructure and properties of AlCoCrCuFeNi high-entropy alloy10.1016/j.intermet.2008.08.012 ↗
41. Microstructure and mechanical properties of twinned Al0.5CrFeNiCo0.3Co0.2 high entropy alloy processed by mechanical alloying and spark plasma sintering10.1016/j.matdes.2013.08.099 ↗
42. Experimental and simulated data about microstructure and phase composition of a NiCrCoTiV high-entropy alloy prepared by vacuum hot-pressing sintering10.1016/j.vacuum.2015.11.007 ↗
43. Structure formation and properties of sputter deposited Nbx-CoCrCuFeNi high entropy alloy thin films10.1016/j.jallcom.2015.06.097 ↗
44. Formation of core–shell structure in high entropy alloy coating by laser cladding10.1016/j.apsusc.2015.12.059 ↗
45. Solid-solution CrCoCuFeNi high-entropy alloy thin films synthesized by sputter deposition10.1080/21663831.2015.1048904 ↗
46. Microstructure and compressive properties of multicomponent Alx(TiVCrMnFeCoNiCu) (100-x) high-entropy alloys10.1016/j.msea.2006.11.049 ↗
47. First demonstration of promising selective electron beam melting method for utilizing high-entropy alloys as engineering materials10.1016/j.matlet.2015.06.046 ↗
48. Synthesis and characterization of nanocrystal line AlFeTiCrZnCu high entropy solid solution by mechanical alloying10.1016/j.jallcom.2007.05.104 ↗
49. Effect of Fe on microstructure and properties ofAlCoCrFexNi(x=1.5, 2.5) high entropy alloy coatings prepared by laser cladding10.1016/j.intermet.2020.106722 ↗
50. Thermal stability and oxidation resistance of FeCrxCoNiB high-entropy alloys coatings by laser cadding10.1016/j.surfcoat.2018.12.072 ↗
51. Dry sliding wear behavior of laser clad TiVCrAlSi high entropy alloy coatings on Ti-6Al-4V substrate
52. Evolution in microstructure and corrosion behavior of AlCoCrxFeNi high-entropy alloy coatings fabricated by laser cladding10.1016/j.jallcom.2018.10.091 ↗
53. Micro structure characterization and corrosion behavior of AlCoCrFeNiTix high-entropy alloy coatings fabricated by laser cladding10.1016/j.surfcoat.2019.01.044 ↗
54. Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering10.1016/j.surfcoat.2004.08.023 ↗
55. Characteristics of TiVCrAlZr multi-element nitride film sprepared by reactive sputtering10.1016/j.nimb.2010.05.039 ↗
56. Multi-component nitride coatings derived from Ti-Al-Cr-Si-V target in RF magnetron sputter10.1016/j.surfcoat.2006.11.041 ↗
57. Effects of substrate temperature and post-annealing on microstructure and properties of (AlCrNbSiTiV)N coatings10.1016/j.tsf.2009.06.020 ↗
58. Influence of substrate bias, deposition temperature and post-deposition annealing on the structure and properties of multi-principal-component (AlCrMoSiTi)N coatings10.1016/j.surfcoat.2007.12.014 ↗
59. Effects of nitriding on the microstructure and properties of VAlTiCrMo high-entropy alloy coatings by sputtering technique10.1016/j.jallcom.2020.153836 ↗
60. Ultrahigh hardness and high electrical resistivity in nano-twinned, nanocrystalline high-entropy alloy films10.1016/j.apsusc.2018.01.050 ↗
61. Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating10.1002/adem.200300507 ↗
62. Plasma-sprayed high entropy alloys: Microstructure and properties of AlCoCrFeNi and MnCoCrFeNi10.1007/s11661-014-2644-z ↗
63. Phase evolution and solidification cracking sensibility in laser remelting treatment of the plasma-sprayed CrMnFeCoNi high entropy alloy coating10.1016/j.matdes.2019.108040 ↗
64. Wear behavior of HVOF-sprayed Al0.6TiCrFeCoNi high entropy alloy coatings at different temperatures10.1016/j.surfcoat.2018.11.052 ↗
65. Electrochemical preparation and magnetic study of Bi-Fe-Co-Ni-Mn high entropy alloy10.1016/j.electacta.2008.06.036 ↗
66. Electrochemical deposition and microstructural characterization of AlCrFeMnNi and AlCrCuFeMnNi high entropy alloy thin films10.1016/j.apsusc.2015.07.142 ↗
67. Microstructure and corrosion performance of AlFeCoNiCu high entropy alloy coatings by addition of grapheme oxide10.1016/j.mtla.2019.100459 ↗
68. Microstructure and wear properties of CuNiSiTiZr high-entropy alloy coatings on TC11 titanium alloy produced by electrospark-computer numerical control deposition process10.1016/j.surfcoat.2015.10.013 ↗
69. Microstructural features and tensile behaviors of the Al0.5CrCuFeNi2 high-entropy alloys by cold rolling and subsequent annealing10.1016/j.matdes.2015.09.092 ↗
70. Strength enhancement and density reduction by the addition of Al in CrFeMoV based high-entropy alloy fabricated through powder metallurgy10.1016/j.matdes.2018.07.023 ↗
71. High-entropy alloy: Challenges and prospects10.1016/j.mattod.2015.11.026 ↗
72. Ultra-strong nanostructured CrMnFeCoNi high entropy alloys10.1016/j.matdes.2020.108895 ↗
73. Ultrahigh-strength and ductile superlattice alloys with nanoscale disordered interfaces10.1126/science.abb6830 ↗
74. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
75. A comparative study on the tribocorrosion behaviors of AlFeCrNiMo high entropy alloy coatings and 304 stainless steel10.1016/j.mtcomm.2020.101261 ↗
76. Microstructure and wear behavior ofAlxCo1.5CrFeNi1.5Tiy high-entropy alloys10.1016/j.actamat.2011.06.041 ↗
77. Corrosion behavior of Hf0.5Nb0.5Ta0.5Ti1.5Zr refractory high-entropy in aqueous chloride solutions10.1016/j.elecom.2018.11.009 ↗
78. Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr, Ti) high entropy alloys10.1016/j.matdes.2016.12.036 ↗
79. Synthesis and characterization of FeCoNiCrCu high-entropy alloy coating by laser cladding10.1016/j.matdes.2010.12.001 ↗
80. Activation energy and high temperature oxidation behavior of multi-principal element alloy10.1002/adem.201700182 ↗
81. Effect of Al content on the oxidation behavior of Y/Hf-doped AlCoCrFeNi high-entropy alloy10.1016/j.corsci.2020.108691 ↗
82. Oxidation behavior of a refractory NbCrMo0.5Ta0.5TiZr alloy10.1007/s10853-012-6582-0 ↗
83. Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys10.1016/j.actamat.2012.06.046 ↗
84. Enhancing the radiation tolerance of high-entropy alloys via atomic-scale chemical heterogeneities10.1016/j.actamat.2022.118662 ↗
85. Simulations of primary damage in a high entropy alloy: Probing enhanced radiation resistance10.1016/j.actamat.2021.116951 ↗
86. Chemical ordering effect on the radiation resistance of a CoNiCrFeMn high-entropy alloy10.1016/j.commatsci.2022.111764 ↗
87. Electronic effects on the radiation damage in high-entropy alloys10.1016/j.actamat.2022.118511 ↗
88. Research overview of high entropy alloy
89. Novel CoFeAlMn high-entropy alloys with excellent soft magnetic properties and high thermal stability10.1016/j.jmst.2023.01.010 ↗
90. Study on a new high-entropy alloy Nd20Pr20La20Fe20Co10Al10 with hard magnetic properties10.1016/j.jallcom.2021.160640 ↗
91. A novel high-entropy alloy with an exceptional combination of soft magnetic properties and corrosion resistance10.1007/s40843-022-2171-5 ↗
92. Development of a novel (Ni40Fe30Co20Al10)90Ti10 high-entropy alloy with excellent photocatalytic performance10.1016/j.matlet.2020.128817 ↗
93. High-entropy (FeCoNiCuZn)WO4 photocatalysts-based fibrous membrane for efficient capturing and upcycling of plastic10.1016/j.cej.2023.144134 ↗
94. Experimental and theoretical investigation of high-entropy alloy/support as a catalyst for reduction reactions10.1016/j.jechem.2023.02.042 ↗