Overview of Friction and Wear Performance of Sliding Bearings
Source abstract
Abstract
Sliding bearings are critical components of the internal combustion engine. Friction and wear occur in the contact area between the shaft and the bearing. Significant wear can occur in poor working conditions or after a long service time, leading to the failure of the sliding bearing and affecting the reliability of the machinery. It is essential to investigate the wear performance of sliding bearings, understand their wear mechanism, predict their service life, and select wear-resistant materials and surface treatments. This paper reviews the current status and prospects of sliding bearing wear research, focusing on the classification of sliding bearing wear tests, wear testing machines, wear test research, wear prediction models, and future research prospects.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Lubricants and Their Additives · Tribology and Wear Analysis · Gear and Bearing Dynamics Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Marine Engineering College, Dalian Maritime University, Dalian 116026, China
College of Transportation Engineering, Dalian Maritime University, Dalian 116026, China
Navigation College, Dalian Maritime University, Dalian 116026, China
Xinyu Key Laboratory of Materials Technology and Application for Intelligent Manufacturing, Xinyu University, Xinyu 338004, China
Ocean School, Yantai University, Yantai 264005, China
Funding
Dalian High-Level Talents Innovation Support Program · Fundamental Research Funds for the Central Universities · Natural Science Foundation of Liaoning Province
References (95)
Show source-provided references
1. Influence of tribology on global energy consumption, costs and emissions10.1007/s40544-017-0183-5 ↗
2. Orthogonal experimental design applied for wear characterization of aluminum/Csf metal composite fabricated by the thixomixing method10.1007/s12289-015-1246-7 ↗
3. Dry sliding friction and wear characterization of in situ TiC/Al-Cu-3.7-Mg-1.3 nanocomposites with nacre-like structures10.1016/j.jmrt.2019.11.005 ↗
4. Wear performance of oil lubricated silicon nitride sliding against various bearing steels10.1016/S0043-1648(03)00045-0 ↗
5. Corrosion and wear resistant electrodeposited composite coatings10.1016/j.electacta.2004.11.067 ↗
6. Investigation of exchange coupling and microwave properties of hard/soft (SrNi0.02Zr0.01Fe11.96O19)/(CoFe2O4)x nanocomposites10.1016/j.mtnano.2022.100186 ↗
7. Thermal evolution of exchange interactions in lightly doped barium hexaferrites10.1016/j.jmmm.2016.10.151 ↗
8. Darwish, M.A., Zubar, T.I., Kanafyev, O.D., Zhou, D., Trukhanova, E.L., Trukhanov, S.V., Trukhanov, A.V., and Henaish, A.M. (2022). Combined effect of microstructure, surface energy, and adhesion force on the friction of PVA/ferrite spinel nanocomposites. Nanomaterals, 12.10.3390/nano12121998 ↗
9. Lubricant effects on white etching cracking failures in thrust bearing rig tests10.1080/10402004.2018.1453571 ↗
10. Tribological performances of highly dispersed graphene oxide derivatives in vegetable oil10.1016/j.triboint.2018.05.004 ↗
11. A comparative study on the dry sliding wear properties of TC4 and TC11 alloys at different sliding velocities10.1088/2053-1591/ab5bdc ↗
12. Effects of PEEK’s surface roughness on seizure behaviors of PEEK/steel pairs under oil-lubricated sliding contacts10.1299/mej.17-00015 ↗
13. Friction and wear properties of lead-free aluminum alloy bearing material with molybdenum disulfide layer by a reciprocating test10.1016/j.triboint.2012.07.017 ↗
14. Effect of Material Hardness on Water Lubrication Performance of Thermoplastic Polyurethane under Sediment Environment10.1007/s11665-021-05912-z ↗
15. Effect of TiC and graphite reinforcement on hardness and wear behaviour of copper alloy B-RG10 composites fabricated through powder metallurgy10.1007/s42791-022-00043-5 ↗
16. Impact of Surface Alloying of Nickel on Microstructure, Hardness and Wear on Aluminium–12% Silicon Alloy10.1007/s12666-019-01692-2 ↗
17. Diode laser surface treatment of bearing steel for improved sliding wear performance10.1016/j.ijleo.2019.163357 ↗
18. Tribological behaviour of sintered 316L stainless steel impregnated with MoS2 plain bearing10.1016/j.wear.2007.11.014 ↗
19. Friction behaviours of molybdenum-based coatings under fretting condition10.1504/IJSURFSE.2011.041400 ↗
20. Friction and wear of highly stressed thermoplastic bearings under dry sliding conditions10.1016/0043-1648(95)06812-0 ↗
21. Study on tribological behavior of zinc phosphate impregnated graphite under oil lubrication condition10.1115/1.4051586 ↗
22. Effect of duration of rubbing and normal load on friction coefficient for polymer and composite materials10.1108/00368791111154931 ↗
23. Friction and wear properties of Cu and Fe-based P/M bearing materials10.1007/BF02916482 ↗
24. Zhao, L., Li, J., Yang, Q., Wang, Y., Zhang, X., Li, H., Yang, Z., Xu, D., and Liu, J. (2022). Study on Friction and Wear Properties of New Self-Lubricating Bearing Materials. Crystals, 12.10.3390/cryst12060834 ↗
25. A study of reliability evaluation of main bearings for multicylinder diesel engines10.4271/2016-01-0494 ↗
26. Sliding wear of YTZP ceramic against steel: Observations on ceramic transfer and wear transition10.1007/BF00353025 ↗
27. A study on the wear behavior of tin-based journal bearing under different working conditions10.1108/ILT-04-2019-0123 ↗
28. An experimental study of axial misalignment effect on seizure load of journal bearings10.1016/j.triboint.2018.11.014 ↗
29. Diagnostic method and application of low speed sliding bearing wear fault10.1088/1757-899X/772/1/012028 ↗
30. A study on diesel engine crankshaft bearing failure analysis with consideration of bearing lubrication10.1108/ILT-06-2021-0231 ↗
31. Fabrication of AlTiN coatings deposited on the ultrasonic rolling textured substrates for improving coatings adhesion strength10.1016/j.apsusc.2021.149394 ↗
32. Metal-containing nanomaterials as lubricant additives: State-of-the-art and future development10.1007/s40544-019-0261-y ↗
33. Dispersion stability and lubrication mechanism of nanolubricants: A review
34. WS2 nanoparticles anti-wear and friction reducing properties on rough surfaces in the presence of ZDDP additive10.1016/j.triboint.2016.05.042 ↗
35. Tribological effects of fullerene (C60) nanoparticles added in mineral lubricants according to its viscosity10.1007/s12541-010-0070-8 ↗
36. Tribological properties of Al2O3 nanoparticles as lubricating oil additives10.1016/j.ceramint.2013.12.050 ↗
37. Synthesis of monodispersed ZnAl2O4 nanoparticles and their tribology properties as lubricant additives10.1016/j.materresbull.2012.09.013 ↗
38. A study on the tribological characteristics of graphite nano lubricants10.1007/s12541-009-0013-4 ↗
39. Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining10.1016/j.jclepro.2013.10.048 ↗
40. WS 2 nanoparticles–potential replacement for ZDDP and friction modifier additives10.1039/C4RA01795A ↗
41. Engineered silica nanoparticles as additives in lubricant oils10.1088/1468-6996/16/5/055005 ↗
42. Sharma, A. (2021). High entropy alloy coatings and technology. Coatings, 11.10.3390/coatings11040372 ↗
43. Wang, Q., Han, P., Yin, S., Niu, W.J., Zhai, L., Li, X., and Han, Y. (2021). Current research status on cold sprayed amorphous alloy coatings: A review. Coatings, 11.10.3390/coatings11020206 ↗
44. A review on tribology of polymer composite coatings10.1007/s40544-020-0446-4 ↗
45. A novel wear-resistant FeCoNiCrAl0. 5Ti0. 5 coating fabricated by laser cladding technology10.1016/j.matlet.2022.132393 ↗
46. Microstructure and high-temperature wear behavior of CoCrFeNiWx high-entropy alloy coatings fabricated by laser cladding10.1016/j.triboint.2022.107574 ↗
47. Li, W., Guo, W., Zhang, H., Xu, H., Chen, L., Zeng, J., and Ding, Z. (2022). Influence of Mo on the Microstructure and Corrosion Behavior of Laser Cladding FeCoCrNi High-Entropy Alloy Coatings. Entropy, 24.10.3390/e24040539 ↗
48. Liu, R., Zhang, M., Yu, J., Yang, Q., and Gao, S. (2022). Microstructural Transformation and High-Temperature Aluminum Corrosion Properties of Co-Based Alloy Coating Prepared by Laser Cladding. Coatings, 12.10.3390/coatings12050603 ↗
49. The effects of graphite filler on the tribological properties of polydopamine/PTFE coatings10.1007/s11249-016-0777-5 ↗
50. The role of surface topography in the evolving microstructure and functionality of tribofilms of an epoxy-based nanocomposite10.1016/j.wear.2016.06.012 ↗
51. A study on the tribological behavior of surface texturing on babbitt alloy under mixed or starved lubrication10.1007/s11249-014-0410-4 ↗
52. A mixed lubrication model for studying tribological behaviors of surface texturing10.1016/j.triboint.2015.03.027 ↗
53. The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact10.1016/j.apsusc.2013.02.013 ↗
54. Optimization tools in the analysis of micro-textured lubricated devices10.1080/17415970600573452 ↗
55. Tribology Properties of Textured Surface with Ring-shape Pits
56. Effect of geometric micro-groove texture patterns on tribological performance of stainless steel10.1007/s11771-018-3740-9 ↗
57. Experimental study on hydrodynamic effect of orientation micro-pored surfaces10.1007/s11431-010-4265-0 ↗
58. Wang, J., Zhang, J., Lin, J., and Ma, L. (2018). Study on lubrication performance of journal bearing with multiple texture distributions. Appl. Sci., 8.10.3390/app8020244 ↗
59. Hou, Q., Yang, X., Cheng, J., Wang, S., Duan, D., Xiao, J., and Li, W. (2020). Optimization of performance parameters and mechanism of bionic texture on friction surface. Coatings, 10.10.3390/coatings10020171 ↗
60. An experimental investigation of dimple effect on the stribeck curve of journal bearings10.1007/s11249-007-9217-x ↗
61. Development of cutting tools with microscale and nanoscale textures to improve frictional behavior10.1016/j.precisioneng.2008.07.005 ↗
62. Lubrication properties of textured polydimethylsiloxane surfaces with different roughness
63. Investigation of the tribological properties of Cu-based porous bearings10.1108/00368791211208723 ↗
64. Design of Accelerated Life Test for Sleeve Bearing of Construction Equipment Based on Wear Prediction10.1080/10402004.2019.1570409 ↗
65. Tribological properties of polyimide-modified UHMWPE for bushing materials of seawater lubricated sliding bearings10.1016/j.triboint.2017.06.011 ↗
66. Tribological behaviour of tin-based materials and brass in oil lubricated conditions10.1016/j.matdes.2007.02.018 ↗
67. A study on tribological behaviour of tin-based bearing material in dry sliding10.1016/j.matdes.2005.05.016 ↗
68. Analysis of wear parameters for AA6063–TiC composites using Taguchi technique
69. Brykov, M.N., Akrytova, T.O., Osipov, M.J., Petryshynets, I., Puchy, V., Efremenko, V.G., and Hesse, O. (2021). Abrasive Wear of High-Carbon Low-Alloyed Austenite Steel: Microhardness, Microstructure and X-ray Characteristics of Worn Surface. Materials, 14.10.3390/ma14206159 ↗
70. Xiao, H., Wang, X., Li, H., Luo, J., and Feng, S. (2019). An inductive debris sensor for a large-diameter lubricating oil circuit based on a high-gradient magnetic field. Appl. Sci., 9.10.3390/app9081546 ↗
71. Enhanced lubrication effect of gallium-based liquid metal with laser textured surface10.1016/j.triboint.2018.08.037 ↗
72. Use of wavelet transform and fuzzy system theory to distinguish wear particles in lubricating oil for bearing diagnosis10.1002/1520-6416(20010115)134:1<36::AID-EEJ5>3.0.CO;2-L ↗
73. In situ collection and analysis of oil debris based on multi-physical field synthesis effect10.1080/02533839.2019.1708803 ↗
74. Wear Debris Analysis of Seizure Behaviors of PEEK Materials in Oil10.2474/trol.11.623 ↗
75. Ferrographic analysis of failure process in a full-scale journal bearing10.1016/0043-1648(92)90123-P ↗
76. The use of automated image analysis for the study of wear particles in oil-lubricated tribological systems10.1016/0043-1648(91)90155-N ↗
77. Application of dielectric spectroscopy for engine lubricating oil degradation monitoring10.1016/j.sna.2011.03.033 ↗
78. Quantitative analysis for monitoring formulation of lubricating oil using terahertz time-domain transmission spectroscopy10.1088/0256-307X/29/4/043901 ↗
79. Lubricating oil conditioning sensors for online machine health monitoring–A review10.1016/j.triboint.2017.01.015 ↗
80. A data-driven failure prognostics method based on mixture of Gaussians hidden Markov models10.1109/TR.2012.2194177 ↗
81. Consideration of the multizone hydrodynamic friction, the misalignment of axes, and the contact compliance of a shaft and a bush of sliding bearings10.3103/S1068366617030163 ↗
82. Numerical assessment of frictional heating in sliding bearings for seismic isolation10.1080/13632469.2014.924890 ↗
83. Three-dimensional finite element simulation of nonlinear dynamic rotor systems of a turbocharger10.1115/1.2827448 ↗
84. A multiscale-approach for wear prediction in journal bearing systems–from wearing-in towards steady-state wear
85. Experimental study on wear life of journal bearings in the rotor system subjected to torque10.1139/tcsme-2019-0035 ↗
86. Wang, B., Zheng, M., and Zhang, W. (2020). Analysis and prediction of wear performance of different topography surface. Materials, 13.10.3390/ma13225056 ↗
87. Tribological behavior prediction of friction materials for ultrasonic motors using Monte Carlo-based artificial neural network10.1002/app.47157 ↗
88. Wear volume prediction with artificial neural networks10.1016/S0301-679X(00)00115-8 ↗
89. Experimental study and prediction using ANN on mass loss of hybrid composites10.1108/00368791211218669 ↗
90. Artificial neural network prediction of fretting wear behavior of structural steel, En 24 against bearing steel, En 3110.1007/s11665-007-9100-9 ↗
91. Prediction on tribological behaviour of composite PEEK-CF30 using artificial neural networks10.1016/j.jmatprotec.2007.02.019 ↗
92. Application of a neural network model for prediction of wear properties of ultrahigh molecular weight polyethylene composites10.1155/2015/315710 ↗
93. Research on image classification method of strip steel surface defects based on improved Bat algorithm optimized BP neural network10.3233/JIFS-210374 ↗
94. Method for identifying the impact load condition of thin-walled structure damage based on PSO-BP neural network10.1177/00368504221079184 ↗
95. Calculation of reliability function and remaining useful life for a Markov failure time process