Corrosion, Wear, and Antibacterial Behaviors of Hydroxyapatite/MgO Composite PEO Coatings on AZ31 Mg Alloy by Incorporation of TiO2 Nanoparticles
Source abstract
Abstract
Plasma electrolytic oxidation (PEO) is a promising surface treatment for generating a thick, adherent coating on valve metals using an environmentally friendly alkaline electrolyte. In this study, the PEO method was used to modify the surface of AZ31 Mg alloy. The composite coatings were formed in a phosphate-based electrolyte containing hydroxyapatite nanoparticles (NPs) and different concentrations (1, 2, 3, and 4 g/L) of TiO2 NPs. The results showed that the incorporation of TiO2 NPs in the composite coatings increased the porosity, coating thickness, surface roughness, and surface wettability of the coatings. The corrosion-resistance results of coatings in simulated body fluid (SBF) were tested for up to 72 h and all coatings showed superior corrosion resistance compared to the bare substrate. Among samples containing TiO2, the sample containing 1 g/L TiO2 had the highest inner layer resistance (0.51 kΩ·cm2) and outer resistance (285 kΩ·cm2) and the lowest average friction coefficient (395.5), so it had the best wear and corrosion resistance performance. The antibacterial tests showed that the higher the concentration of TiO2 NPs, the lower the adhesion of bacteria, resulting in enhanced antibacterial properties against S. aureus. The addition of 4 g/L of TiO2 NPs to the electrolyte provided an antibacterial rate of 97.65% for the coating.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Engineering, Bu-Ali Sina University, Hamedan 65178-38695, Iran
Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada
Department of Nanotechnology and Advanced Materials Engineering, Sejong University, Seoul 05006, Republic of Korea
Funding
Bu-Ali Sina University
References (100+)
Show source-provided references
1. High damping metals for engineering applications10.1016/0025-5416(69)90033-0 ↗
2. Protective coatings on magnesium and its alloys—A critical review10.1016/S0925-8388(01)01899-0 ↗
3. Development of anodic film on Mg alloy AZ91D10.1016/j.surfcoat.2006.04.015 ↗
4. Preparation and properties of composite MAO/ECD coatings on magnesium alloy10.1016/j.colsurfb.2012.07.040 ↗
5. Surface characterization of bioceramic coatings on Zr and its alloys using plasma electrolytic oxidation (PEO): A review10.1016/j.surfin.2021.101283 ↗
6. Biomedical coatings on magnesium alloys—A review10.1016/j.actbio.2012.04.012 ↗
7. Effect of KOH concentration on the microstructure and electrochemical properties of MAO-coated Mg alloy10.1007/s11665-015-1645-4 ↗
8. Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids10.1016/j.actbio.2009.04.041 ↗
9. Alternative conversion coatings to chromate for the protection of magnesium alloys10.1016/j.corsci.2014.03.021 ↗
10. Corrosion product layers on magnesium alloys AZ31 and AZ61: Surface chemistry and protective ability10.1016/j.apsusc.2015.04.189 ↗
11. Impressive strides in amelioration of corrosion and wear behaviors of Mg alloys using applied polymer coatings on PEO porous coatings: A review10.1016/j.jma.2022.01.015 ↗
12. Review of magnesium-based biomaterials and their applications10.1016/j.jma.2018.02.003 ↗
13. Effect of particles addition to solution of plasma electrolytic oxidation (PEO) on the properties of PEO coatings formed on magnesium and its alloys: A review10.1016/j.jma.2020.05.001 ↗
14. Magnesium-based composites and alloys for medical applications: A review of mechanical and corrosion properties10.1016/j.jallcom.2019.04.080 ↗
15. Fabrication of functionalized coating with a unique flowery-flake structure for an effective corrosion performance and catalytic degradation10.1016/j.cej.2021.129737 ↗
16. Influence of concentrations of KOH and Na2SiO3 electrolytes on the electrochemical behavior of ceramic coatings on 6061 Al alloy processed by plasma electrolytic oxidation10.1007/s40195-016-0384-3 ↗
17. Tribological performance of PEO-WC nanocomposite coating on Mg Alloys deposited by Plasma Electrolytic Oxidation10.1016/j.triboint.2016.02.029 ↗
18. Effect of ceramics coating using sol-gel processing on corrosion resistance and age hardening of AZ80 magnesium alloy substrate10.1016/j.surfcoat.2013.04.004 ↗
19. Preparations of TiO2 film coated on foam nickel substrate by sol-gel processes and its photocatalytic activity for degradation of acetaldehyde10.1016/S1001-0742(07)60013-8 ↗
20. Atmospheric pressure plasma enhanced chemical vapor deposition of SiOx films for improved corrosion resistant properties of AZ31 magnesium alloys10.1016/j.surfcoat.2015.11.004 ↗
21. Preparation of highly oriented titania nanosheet thin films by electrophoretic deposition10.1016/j.tsf.2009.05.058 ↗
22. PVD-Grown photocatalytic TiO2 thin films on PVDF substrates for sensors and actuators applications10.1016/j.tsf.2008.06.024 ↗
23. N-doped titania-based nanofiber thin films synthesized via a hydrothermal route and their photo-induced properties under visible light
24. Recent progress in surface modification of metals coated by plasma electrolytic oxidation: Principle, structure, and performance10.1016/j.pmatsci.2020.100735 ↗
25. A review of recent work on discharge characteristics during plasma electrolytic oxidation of various metals10.1080/09506608.2018.1466492 ↗
26. Excellent plasma electrolytic oxidation coating on AZ61 magnesium alloy under ordinal discharge mode10.1016/j.jma.2021.01.003 ↗
27. Plasma electrolytic oxidation of Ti-25Nb-xTa alloys in solution containing Ca and P ions10.1016/j.surfcoat.2020.125916 ↗
28. Advances in microarc oxidation coated AZ31 Mg alloys for biomedical applications10.1016/j.corsci.2014.11.001 ↗
29. Surface characterization and corrosion behavior of calcium phosphate-base composite layer on titanium and its alloys via plasma electrolytic oxidation: A review paper10.1016/j.msec.2015.07.058 ↗
30. Effect of RE on PEO Effect of cerium and lanthanum additives on plasma electrolytic oxidation of AZ31 magnesium alloy10.1016/S1002-0721(12)60428-1 ↗
31. Monetta, T., Parnian, P., and Acquesta, A. (2020). Recent advances in the control of the degradation rate of PEO treated magnesium and its alloys for biomedical applications. Metals, 10.10.3390/met10070907 ↗
32. Duty cycle influence on the corrosion behavior of coatings created by plasma electrolytic oxidation on AZ31B magnesium alloy in simulated body fluid10.1016/j.corcom.2021.09.005 ↗
33. Anionic assisted incorporation of WO3 nanoparticles for enhanced electrochemical properties of AZ31 Mg alloy coated via plasma electrolytic oxidation10.1016/j.jallcom.2022.165445 ↗
34. Improving surface characteristics of PEO coatings of Mg and its alloys with zirconia nanoparticles: A review10.1016/j.apsadv.2021.100131 ↗
35. The effect of in-situ reactive incorporation of MoOx on the corrosion behavior of Ti-6Al-4 V alloy coated via micro-arc oxidation coating10.1016/j.corsci.2021.109764 ↗
36. Improving the electrochemical stability of AZ31 Mg alloy in a 3.5wt.% NaCl solution via the surface functionalization of plasma electrolytic oxidation coating10.1016/j.jma.2021.08.028 ↗
37. Preparation and characterization of hydroxyapatite containing coating on AZ31 magnesium alloy by micro-arc oxidation10.1016/j.jallcom.2016.07.079 ↗
38. Enhancing corrosion and wear performance of PEO coatings on Mg alloys using graphene and graphene oxide additions: A review10.1016/j.flatc.2021.100241 ↗
39. Role of incorporation of ZnO nanoparticles on corrosion behavior of ceramic coatings developed on AZ31 magnesium alloy by plasma electrolytic oxidation technique10.1016/j.surfin.2020.100728 ↗
40. Effect of additives on structure and corrosion resistance of ceramic coatings on Mg-Li alloy by micro-arc oxidation10.1016/j.cap.2009.10.011 ↗
41. Electrochemical corrosion properties of CeO 2-containing coatings on AZ31 magnesium alloys prepared by plasma electrolytic oxidation10.1016/j.corsci.2012.04.043 ↗
42. Tu, X., Miao, C., Zhang, Y., Xu, Y., and Li, J. (2018). Plasma electrolytic oxidation of magnesium alloy AZ31B in electrolyte containing Al2O3 sol as additives. Materials, 11.10.3390/ma11091618 ↗
43. Formation of photocatalytic plasma electrolytic oxidation coatings on magnesium alloy by incorporation of TiO2 particles10.1016/j.surfcoat.2016.09.006 ↗
44. Electrochemical response of ZrO2-incorporated oxide layer on AZ91 Mg alloy processed by plasma electrolytic oxidation10.1016/j.surfcoat.2011.01.033 ↗
45. Preparation and characterization of HA microflowers coating on AZ31 magnesium alloy by micro-arc oxidation and a solution treatment10.1016/j.apsusc.2012.10.146 ↗
46. Fabrication and characterization of rod-like nano-hydroxyapatite on MAO coating supported on Mg–Zn–Ca alloy10.1016/j.apsusc.2010.09.080 ↗
47. Effect of Graphene on Micro-Structure and Properties of MAO Coating Prepared on Mg-Li Alloy10.20964/2017.07.59 ↗
48. Multi-functional ceramic hybrid coatings on biodegradable AZ31 Mg implants: Electrochemical, tribological and quantum chemical aspects for orthopaedic applications10.1039/c4ra02363c ↗
49. Triggering the hydroxyapatite deposition on the surface of PEO-coated Ti–6Al–4V alloy via the dual incorporation of Zn and Mg ions10.1016/j.jallcom.2019.153038 ↗
50. Surface characterization and corrosion behavior of calcium phosphate (Ca-P) base composite layer on Mg and its alloys using plasma electrolytic oxidation (PEO): A review10.1016/j.jma.2020.07.004 ↗
51. Enhanced uniformity of apatite coating on a PEO film formed on AZ31 Mg alloy by an alkali pretreatment10.1016/j.surfcoat.2015.04.007 ↗
52. Effect of current mode on PEO treatment of magnesium in Ca- and P-containing electrolyte and resulting coatings10.1016/j.apsusc.2014.08.035 ↗
53. Surface design of biodegradable magnesium alloys—A review10.1016/j.surfcoat.2012.10.009 ↗
54. HA coating on Mg alloys for biomedical applications: A review10.1016/j.jma.2020.05.003 ↗
55. Biological and antibacterial properties of the micro-nanostructured hydroxyapatite/chitosan coating on titanium10.1038/s41598-019-49941-0 ↗
56. In vitro degradation behavior, antibacterial activity and cytotoxicity of TiO2-MAO/ZnHA composite coating on Mg alloy for orthopedic implants10.1016/j.surfcoat.2017.11.027 ↗
57. Improving the wear resistance of plasma electrolytic oxidation (PEO) coatings applied on Mg and its alloys under the addition of nano- and micro-sized additives into the electrolytes: A review10.1016/j.jma.2020.11.016 ↗
58. Effect of titania nanoparticles on micro-arc anodizing of AM60B magnesium alloy
59. Formation of microarc oxidation coatings on magnesium alloy with photocatalytic performance10.1016/j.apsusc.2012.06.066 ↗
60. Preparation and corrosion resistance of a nanocomposite plasma electrolytic oxidation coating on Mg-1%Ca alloy formed in aluminate electrolyte containing titania nano-additives10.1016/j.jallcom.2016.07.081 ↗
61. Investigation of heat treatment and subsequently surface modification by nano-TiO2 on Mg–Zn–Ca–Mn bio-magnesium alloy10.1166/mex.2019.1597 ↗
62. TiO2 Deposition on AZ31 Magnesium Alloy Using Plasma Electrolytic Oxidation10.1155/2013/319437 ↗
63. Increasing the in-vitro corrosion resistance of AZ31B-Mg alloy via coating with hydroxyapatite using plasma electrolytic oxidation10.1080/21870764.2019.1698143 ↗
64. Enhancing cytocompatibility, antibacterial activity and corrosion resistance of PEO coatings on titanium using incorporated ZrO2 nanoparticles10.1016/j.surfin.2022.101967 ↗
65. Incorporating TiO2 nanoparticles to enhance corrosion resistance, cytocompatibility, and antibacterial properties of PEO ceramic coatings on titanium10.1016/j.ceramint.2022.04.096 ↗
66. Review of the biocompatibility of micro-arc oxidation coated titanium alloys10.1016/j.matdes.2015.07.086 ↗
67. Plasma electrolytic oxidation (PEO) treatment of zinc and its alloys: A review10.1016/j.surfin.2020.100441 ↗
68. Mohedano, M., Lu, X., Matykina, E., Blawert, C., Arrabal, R., and Zheludkevich, M.L. (2018). Plasma Electrolytic Oxidation (PEO) of Metals and Alloys. Encyclopedia of Interfacial Chemistry, Elsevier.10.1016/B978-0-12-409547-2.13398-0 ↗
69. A review on plasma electrolytic oxidation (PEO) of niobium: Mechanism, properties and applications10.1016/j.surfin.2020.100719 ↗
70. Stabilization of AZ31 Mg alloy in sea water via dual incorporation of MgO and WO3 during micro-arc oxidation10.1016/j.jallcom.2020.157036 ↗
71. Theory of electrical breakdown during formation of barrier anodic films10.1016/0013-4686(77)80042-X ↗
72. Microstructure characteristic of ceramic coatings fabricated on magnesium alloys by micro-arc oxidation in alkaline silicate solutions10.1016/j.apsusc.2005.09.067 ↗
73. Microstructure and corrosion behavior of coated AZ91 alloy by microarc oxidation for biomedical application10.1016/j.apsusc.2009.06.116 ↗
74. Formation process of composite plasma electrolytic oxidation coating containing zirconium oxides on AM50 magnesium alloy10.1016/S1003-6326(11)60805-4 ↗
75. Effect of lanthanum nitrate on the microstructure and electrochemical behavior of PEO coatings on AZ31 Mg alloy10.1016/j.jallcom.2017.05.169 ↗
76. Improvement on corrosion resistance of micro-arc oxidized AZ91D magnesium alloy by a pore-sealing coating10.1016/j.jallcom.2021.161460 ↗
77. Microstructure and corrosion behavior of Ca/P coatings prepared on magnesium by plasma electrolytic oxidation10.1016/j.surfcoat.2017.04.001 ↗
78. Plasma electrolytic oxidation of magnesium and its alloys: Mechanism, properties and applications10.1016/j.jma.2017.02.004 ↗
79. Review of electrochemical properties of hybrid coating systems on Mg with plasma electrolytic oxidation process as pretreatment10.1016/j.surfin.2019.01.004 ↗
80. Micro and nano-enabled approaches to improve the performance of plasma electrolytic oxidation coated magnesium alloys10.1016/j.jma.2020.11.004 ↗
81. Influence of sodium borate concentration on properties of anodic coatings obtained by micro arc oxidation on magnesium alloys10.1016/j.apsusc.2012.03.088 ↗
82. Characterization and corrosion behavior of ceramic coating on magnesium by micro-arc oxidation10.1016/j.jallcom.2011.06.059 ↗
83. Effect of electrolyte additives on performance of plasma electrolytic oxidation films formed on magnesium alloy AZ91D10.1016/j.electacta.2006.10.066 ↗
84. Calcium phosphates for biomedical applications10.1016/j.bsecv.2017.05.001 ↗
85. Current status on clinical applications of magnesium-based orthopaedic implants: A review from clinical translational perspective10.1016/j.biomaterials.2016.10.017 ↗
86. In Vitro Corrosion and Antibacterial Performance of Micro-Arc Oxidation Coating on AZ31 Magnesium Alloy: Effects of Tannic Acid10.1149/2.0941811jes ↗
87. Effects of the graphene additive on the corrosion resistance of the plasma electrolytic oxidation (PEO) coating on the AZ91 magnesium alloy10.20964/2018.09.06 ↗
88. Improvement of corrosion properties of microarc oxidation coating on magnesium alloy by optimizing current density parameters10.1016/j.apsusc.2007.02.010 ↗
89. Effect of the graphene oxide additive on the corrosion resistance of the plasma electrolytic oxidation coating of the AZ31 magnesium alloy10.1016/j.corsci.2016.11.007 ↗
90. Morphological modification and corrosion response of MgO and Mg3(PO4)2 composite formed on magnesium alloy10.1016/j.compositesb.2019.107225 ↗
91. A novel hybrid composite composed of albumin, WO3, and LDHs film for smart corrosion protection of Mg alloy10.1016/j.compositesb.2020.108490 ↗
92. On the intrinsic coupling between constant-phase element parameters α and Q in electrochemical impedance spectroscopy10.1016/j.electacta.2012.04.020 ↗
93. Corrosion behavior of HA containing ceramic coated magnesium alloy in Hank ’ s solution10.1016/j.jallcom.2016.12.168 ↗
94. Optimisation of PEO layers with incorporated nanoparticles10.1080/00202967.2020.1828691 ↗
95. Friction and wear of materials10.1115/1.3625110 ↗
96. Hutchings, I., and Shipway, P. (2017). Tribology: Friction and Wear of Engineering Materials, Butterworth-Heinemann.10.1016/B978-0-08-100910-9.00003-9 ↗
97. Tribological properties of PEO nanocomposite coatings on titanium formed in electrolyte containing ketoconazole10.1016/j.triboint.2016.06.013 ↗
98. Incorporation of ZnO–ZrO2 nanoparticles into TiO2 coatings obtained by PEO on Ti–6Al–4V substrate and evaluation of its corrosion behavior, microstructural and antibacterial effects exposed to SBF solution10.1016/j.ceramint.2021.08.248 ↗
99. Antibacterial activities and corrosion behavior of novel PEO / nanostructured ZrO2 coating on Mg alloy10.1016/S1003-6326(18)64799-5 ↗
100. Improvement of biodegradable and antibacterial properties by solution treatment and micro-arc oxidation (MAO) of a magnesium alloy with a trace of copper10.1016/j.corsci.2019.05.015 ↗