Surface Modifications for Implants Lifetime extension: An Overview of Sol-Gel Coatings
Source abstract
Abstract
The limited lifetime of implants entails having patients undergo replacement surgeries, several times throughout life in young patients, with significant risks for them and extensive cost for healthcare service. The overcoming of such inconvenience is still today a hard challenge for the scholars of the biomedical and biomaterial fields. The improvement of the currently employed implants through surface modification by coatings application is the main strategy proposed to avoid implants failure, and the sol-gel coating is an ideal technology to achieve this goal. Therefore, the present review aims to provide an overview of the most important problems leading to implant failure, the sol-gel coating technology, and its use as a strategy to overcome such issues.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Polymer Surface Interaction Studies · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical, Aerospace and Civil Engineering, University of Manchester, Manchester M13 9PL, UK
Department of Engineering, University of Campania “Luigi Vanvitelli”, via Roma 29, 81031 Aversa (CE), Italy
References (100+)
Show source-provided references
1. Antibacterial coating of implants: Are we missing something?10.1302/2046-3758.85.BJR-2018-0316 ↗
2. Davim, J.P. (2019). 1—Tribology of Materials for Biomedical Applications. Mechanical Behaviour of Biomaterials, Woodhead Publishing.10.1016/B978-0-08-102174-3.00001-2 ↗
3. Marin, E., Boschetto, F., and Pezzotti, G. (2020). Biomaterials and biocompatibility: An historical overview. J. Biomed. Mater. Res. Part A, 1633–1677.10.1002/jbm.a.36930 ↗
4. Yang, X.-Y. (2020). Sol-Gel Technology to Prepare Advanced Coatings. Photoenergy and Thin Film Materials, Wiley Scrivener Publishing LLC.
5. Revision rates after total joint replacement: Cumulative results from worldwide joint register datasets10.1302/0301-620X.93B3.25467 ↗
6. Ruiz-Pérez, J.S., Gómez-Cardero, P., and Rodríguez-Merchán, E.C. (2020). Revision Total Knee Arthroplasty: Complications and Results. Revision Total Joint Arthroplasty, Springer.10.1007/978-3-030-44492-1_11 ↗
7. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications10.1016/j.msec.2019.04.064 ↗
8. Sol-gel coatings on metals for corrosion protection10.1016/j.porgcoat.2008.08.010 ↗
9. Bioactive materials for biomedical applications using sol-gel technology10.1088/1748-6041/3/3/034005 ↗
10. Plasma sprayed coatings of hydroxylapatite10.1002/jbm.820211203 ↗
11. Response of SAOS-2 cells to simulated microgravity and effect of biocompatible sol-gel hybrid coatings10.1016/j.actaastro.2016.01.029 ↗
12. Calcium phosphate induction by sol-gel-derived titania coatings on titanium substrates in vitro10.1002/(SICI)1097-4636(19980905)41:3<504::AID-JBM22>3.0.CO;2-G ↗
13. Biological evaluation of the effect of magnetron sputtered Ca/P coatings on osteoblast-like cells in vitro10.1002/jbm.820290808 ↗
14. Carrera-Figueiras, C., Pérez-Padilla, Y., Estrella-Gutiérrez, M.A., Uc-Cayetano, E.G., Juárez-Moreno, J.A., and Avila-Ortega, A. (2019). Surface Science Engineering through Sol-Gel Process. Applied Surface Science, IntechOpen.10.5772/intechopen.83676 ↗
15. Bioceramics: From Concept to Clinic10.1111/j.1151-2916.1991.tb07132.x ↗
16. Review of bioactive glass: From Hench to hybrids10.1016/j.actbio.2012.08.023 ↗
17. Bollino, F., Armenia, E., and Tranquillo, E. (2017). Zirconia/hydroxyapatite composites synthesized via sol-gel: Influence of hydroxyapatite content and heating on their biological properties. Materials, 10.10.3390/ma10070757 ↗
18. Calcium phosphate formation on porous sol-gel-derived SiO2 and CaO-P2O5-SiO2 substrates in vitro10.1002/(SICI)1097-4636(199901)44:1<12::AID-JBM2>3.0.CO;2-E ↗
19. Characterizing the hierarchical structures of bioactive sol-gel silicate glass and hybrid scaffolds for bone regeneration10.1098/rsta.2011.0308 ↗
20. Sol-gel based materials for biomedical applications10.1016/j.pmatsci.2015.12.001 ↗
21. Sol-Gel-Derived Hybrid Coatings for Corrosion Protection10.1023/A:1020736107842 ↗
22. Adhesion strength of sol-gel derived fluoridated hydroxyapatite coatings10.1016/j.surfcoat.2005.11.033 ↗
23. Modulation of indomethacin release from ZrO2/PCL hybrid multilayers synthesized via solegel dip coating10.1016/j.jddst.2014.12.004 ↗
24. Synthesis of zirconia/polyethylene glycol hybrid materials by sol-gel processing and connections between structure and release kinetic of indomethacin10.3109/10717544.2013.865816 ↗
25. Morphological and thermal characterization of zirconia/hydroxyapatite composites prepared via sol-gel for biomedical applications10.1016/j.ceramint.2018.07.292 ↗
26. Formation and transformation of amorphous calcium phosphates on titanium alloy surfaces during atmospheric plasma spraying and their subsequent in vitro performance10.1016/j.biomaterials.2005.06.029 ↗
27. Mechanical properties of sintered hydroxyapatite for prosthetic applications10.1007/BF02402799 ↗
28. Hybrid nanocomposite coating by sol-gel method: A review10.1007/s13726-016-0440-x ↗
29. Sol-gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications10.1016/j.surfcoat.2017.10.079 ↗
30. Brinker, C., and Scherer, G. (1989). Sol-Gel Science: The Physics and Chemistry of Sol-Gel processing, Academic Press.
31. Sol-gel Technology for Sensor Applications (Review Paper)10.14429/dsj.57.1765 ↗
32. Sol gel method performed for biomedical products implementation10.2174/1389557511009010990 ↗
33. The evolution of ‘sol-gel’ chemistry as a technique for materials synthesis10.1039/C5MH00260E ↗
34. Unsupported SiO2-based organic-inorganic membranes Part 2: Surface features and gas permeation10.1039/a608382j ↗
35. Chemical modification of alkoxide precursors10.1016/0022-3093(88)90007-5 ↗
36. A Theoritical Study on Spin Coating Technique10.12989/amr.2013.2.4.195 ↗
37. Fundamental understanding and modeling of spin coating process: A review10.1007/s12648-009-0009-z ↗
38. Schneller, T., Waser, R., Kosec, M., and Payne, D. (2013). Spin Coating: Art and Science. Chemical Solution Deposition of Functional Oxide Thin Films, Springer-Verlag Wien.10.1007/978-3-211-99311-8 ↗
39. High-mobility ultrathin semiconducting films prepared by spin coating10.1038/nature02389 ↗
40. Glocker, D., and Ranade, S. (2016). Medical Coatings and Deposition Technologies, Wiley.10.1002/9781119308713 ↗
41. Review of titanium surface modification techniques and coatings for antibacterial applications10.1016/j.actbio.2018.10.036 ↗
42. Osseointegration and its experimental background10.1016/S0022-3913(83)80101-2 ↗
43. Research on implants and osseointegration10.1111/prd.12254 ↗
44. Orthopaedic osseointegration: State of the art10.5435/JAAOS-D-19-00016 ↗
45. Planell, J.A. (2009). Bone Repair Biomaterials, Elsevier.10.1533/9781845696610 ↗
46. Recent coating developments for combination devices in orthopedic and dental applications: A literature review10.1016/j.addr.2017.01.007 ↗
47. Deposition characteristics of titanium coating in cold spraying10.1016/S0257-8972(02)00919-2 ↗
48. The preparation of calcium phosphate coatings on titanium and nickel–titanium by rf-magnetron-sputtered deposition: Composition, structure and micromechanical properties10.1016/j.surfcoat.2008.01.038 ↗
49. Electrophoretic deposition of hydroxyapatite coatings on titanium from dimethylformamide suspensions10.1016/j.surfcoat.2011.06.034 ↗
50. Dip Coating of Calcium Hydroxyapatite on Ti-6Al-4V Substrates10.1111/j.1151-2916.2000.tb01314.x ↗
51. Hydroxyapatite coating on Ti6Al4V alloy using a sol-gel derived precursor10.1016/S0254-0584(01)00474-6 ↗
52. Hydroxyapatite coating on Ti6Al4V alloy by a sol-gel method10.1007/s10856-007-3338-5 ↗
53. Performance of bioactive hydroxyapatite coating after soaking in simulated body fluid10.4028/www.scientific.net/AMR.93-94.59 ↗
54. Sol-gel derived porous hydroxyapatite coatings10.1023/A:1008819703551 ↗
55. Sol-gel derived calcium hydroxyapatite thin films on 316L stainless steel substrate: Comparison of spin-coating and dip-coating techniques
56. Sol-gel chemical routes for preparing bioactive fluorhydroxyapatite thin films and powders
57. The structural and bio-corrosion barrier performance of Mg-substituted fluorapatite coating on 316L stainless steel human body implant10.1016/j.apsusc.2013.10.029 ↗
58. Zirconia-hydroxyapatite composite coating on cp-Ti implants by biomimetic method10.4028/www.scientific.net/AMR.445.685 ↗
59. The future of biologic coatings for orthopaedic implants10.1016/j.biomaterials.2013.01.074 ↗
60. Coatings of titanium substrates with xCaO·(1 − x)SiO2 sol-gel materials: Characterization, bioactivity and biocompatibility evaluation10.1016/j.msec.2015.09.033 ↗
61. Preparation and characterization of sol-gel bioactive glass coating for improvement of biocompatibility of human body implant10.1016/j.msea.2007.05.041 ↗
62. Preparation of 0.7SiO2·0.3CaO/PCL hybrid layers via sol-gel dip coating for the surface modification of titanium implants: Characterization, bioactivity and biocompatibility evaluation10.1007/s10971-015-3771-8 ↗
63. Control of the degradation of silica sol-gel hybrid coatings for metal implants prepared by the triple combination of alkoxysilanes10.1016/j.jnoncrysol.2016.09.026 ↗
64. Surface modifications of titanium implants by coating with bioactive and biocompatible poly (ε-caprolactone)/SiO2 hybrids synthesized via sol-gel10.1016/j.arabjc.2015.02.010 ↗
65. Thin-film silica sol-gel coatings for neural microelectrodes10.1016/j.jneumeth.2009.02.008 ↗
66. Combined laser/sol-gel synthesis of calcium silicate coating on Ti-6Al-4V substrates for improved cell integration10.1016/j.apsusc.2007.02.172 ↗
67. Sol-gel deposited TiO2 film on NiTi surgical alloy for biocompatibility improvement10.1016/S0040-6090(03)00146-9 ↗
68. PEG-based organic–inorganic hybrid coatings prepared by the sol-gel dip-coating process for biomedical applications10.1002/pen.24488 ↗
69. Biocompatibility of TiO2 and TiO2/heparin coatings on NiTi alloy10.1016/j.apsusc.2014.05.182 ↗
70. Nano-structure TiO2 film coating on 316L stainless steel via sol-gel technique for blood compatibility improvement
71. Formation of TiO2 coating layer on the surface treated Ti alloys10.4028/www.scientific.net/MSF.569.177 ↗
72. Sol-gel-based zirconia biocoatings on metal structurally enhanced by polyethylene glycol10.1007/s10971-015-3885-z ↗
73. Surface Modification of Stainless Steel Orthopedic Implants by Sol—Gel ZrTiO4 and ZrTiO4—PMMA Coatings10.1166/jbn.2013.1619 ↗
74. Release kinetics of anti-Inflammatory drug, and characterization and bioactivity of SiO2+PCL hybrid material synthesized by sol-Gel processing
75. Good Biocompatibility and Sintering Properties of Zirconia Nanoparticles Synthesized via Vapor-phase Hydrolysis10.1038/srep35020 ↗
76. Synthesis of SiO2 system via sol-gel process: Biocompatibility tests with a fibroblast strain and release kinetics10.1002/jbm.a.34836 ↗
77. Preparation and evaluation of the cytotoxic nature of TiO2 nanoparticles by direct contact method
78. Hydroxyapatite Formation on Sol-gel Derived Poly(ε-Caprolactone)/Bioactive Glass Hybrid Biomaterials10.1021/am300487c ↗
79. The biocompatability of mesoporous inorganic–organic hybrid resin films with ionic and hydrophilic characteristics10.1016/j.biomaterials.2009.12.013 ↗
80. Microstructural Analysis of the Effects of Poly(ethylene glycol) on an Acid Catalyzed Sol-Gel Derived Ceramic Material10.1023/A:1008988011583 ↗
81. Studies on new polymeric biomaterials with tunable hydrophilicity, and their possible utility in corneal repair surgery10.1016/S0142-9612(01)00237-X ↗
82. Cytokine induction of sol-gel-derived TiO2 and SiO2 coatings on metallic substrates after implantation to rat femur10.2147/IJN.S114885 ↗
83. Improving the osteointegration and bone–implant interface by incorporation of bioactive particles in sol-gel coatings of stainless steel implants10.1016/j.actbio.2009.10.015 ↗
84. Current epidemiology of revision total knee arthroplasty in the United States10.1016/j.arth.2017.03.066 ↗
85. Rodríguez-Merchán, E.C., and Liddle, A.D. (2018). Epidemiology of the Infected Total Knee Arthroplasty: Incidence, Causes, and the Burden of Disease. The infected Total Knee Arthroplasty, Springer.10.1007/978-3-319-66730-0 ↗
86. The significance of infection related to orthopedic devices and issues of antibiotic resistance10.1016/j.biomaterials.2005.11.044 ↗
87. Titanium oxide nanotubes embedded with silver dioxide nanoparticles for staphylococcus aureus infections after prosthetic joint replacement in animal models
88. Controlled release of vancomycin from thin sol-gel films on titanium alloy fracture plate material10.1016/j.biomaterials.2006.11.035 ↗
89. Use of antibiotic loaded biomaterials for the management of bone prosthesis infections: Rationale and limits10.2174/0929867325666171129220031 ↗
90. Hydrophobic polycationic coatings that inhibit biofilms and support bone healing during infection10.1016/j.biomaterials.2011.10.038 ↗
91. Tetracycline tethered to titanium inhibits colonization by Gram-negative bacteria10.1002/jbm.b.33310 ↗
92. Cabal, B., Cafini, F., Esteban-Tejeda, L., Alou, L., Bartolomé, J.F., Sevillano, D., López-Piriz, R., Torrecillas, R., and Moya, J.S. (2012). Inhibitory effect on in vitro Streptococcus oralis biofilm of a soda-lime glass containing silver nanoparticles coating on titanium alloy. PLoS ONE, 7.10.1371/journal.pone.0042393 ↗
93. Inhibition of biofilm formation on iodine-supported titanium implants10.1007/s00264-017-3477-3 ↗
94. Synthesis and characterization of silica-chitosan hybrid materials as antibacterial coatings for titanium implants10.1016/j.carbpol.2018.09.064 ↗
95. Influence of acetylation degree and molecular weight of homogeneous chitosans on antibacterial and antifungal activities10.1016/j.ijfoodmicro.2014.04.029 ↗
96. A single coating with antibacterial properties for prevention of medical device-associated infections10.1016/j.eurpolymj.2019.02.002 ↗
97. Non-cytotoxic antibacterial silver–coumarin complex doped sol-gel coatings10.1016/j.colsurfb.2012.07.047 ↗
98. Sol-gel synthesis of Ag-doped titania-coated carbon nanotubes and study their biomedical applications10.1007/s11696-019-00869-9 ↗
99. Antimicrobial Activity of Thin Solid Films of Silver Doped Hydroxyapatite Prepared by Sol-Gel Method10.1155/2014/165351 ↗
100. Synthesis and bactericidal ability of Ag/TiO2 composite films deposited on titanium plate10.1016/j.apsusc.2010.08.003 ↗