journal article·2016-12-22Open access

Weathering of Two Anti-Graffiti Protective Coatings on Concrete Paving Slabs

Paula Carmona-Quiroga, Robert Jacobs, Heather Viles

Coatings· Volume 7· Issue 1

Abstract

The durability of anti-graffiti coatings is of special relevance since, unlike other protective treatments, they are not only affected by environmental factors, but also by often aggressive cleaning procedures. However, little is known about the long-term performance of either permanent or sacrificial coatings. This study explores the durability of two commercial coatings on concrete paving slabs under both natural and artificial ageing tests. The results of this research show that a fluorinated polyurethane and a crystalline micro wax weathered in less than 2000 h in a chamber with UVB radiation and after one year of outdoor exposure in the south of England. The former weathered by getting yellow and dark, and eventually, only under the accelerated ageing test, by losing its adhesion to the concrete slabs, and the latter weathered by getting dark, cracked and by reducing its water repellency under natural conditions. Cleaning efficiency of the protected surfaces from graffiti paints was therefore diminished, particularly when pressurized water spray was used on the polyurethane coated surfaces, since the treatment was partially removed and the concrete surface eroded.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Building materials and conservation · Microplastics and Plastic Pollution · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Geography and the Environment, University of Oxford, South Parks Road, OX1 3QY, Oxford, UK

Chemistry Research Laboratory, Department of Chemistry, University of Oxford, 12 Mansfield Road, OX1 3TA, Oxford, UK

Funding

FP7-2013

References (24)

Show source-provided references
1. Moral Panics and Urban Growth Machines: Official Reactions to Graffiti in New York City, 1990–200510.1007/s11133-010-9154-0 ↗
2. Interaction between two anti-graffiti treatments and cement mortar (paste)10.1016/j.cemconres.2010.01.002 ↗
3. Effectiveness of antigraffiti treatments in connection with penetration depth determined by different techniques10.1016/j.culher.2009.09.006 ↗
4. Characterization of concrete surface in relation to graffiti protection coatings10.1016/j.conbuildmat.2015.11.012 ↗
5. Relevance of hydrophobic and oleophobic properties of antigraffiti systems on their cleaning efficiency on concrete and stone surfaces10.1061/(ASCE)MT.1943-5533.0000557 ↗
6. Borrelli, E., and Fassina, V. (2011). Hydrophobe VI: Water Repellent Treatment of Building Materials, Proceedings of the 6th International Conference on Water Repellent Treatment of Building Materials, Rome, Italy, 12–13 May 2011, Aedificatio Publishers.
7. Behaviour of different removers on permanent anti-graffiti organic coatings10.1016/j.jobe.2015.12.004 ↗
8. Accelerated and outdoor/natural exposure testing of coatings10.1016/S0079-6700(00)00030-7 ↗
9. Investigating the surface properties of polyurethane based anti-graffiti coatings against UV exposure10.1002/app.35344 ↗
10. Surface analysis and anti-graffiti behavior of a weathered polyurethane-based coating embedded with hydrophobic nano silica10.1016/j.apsusc.2011.12.123 ↗
11. Effects of wax-based anti-graffiti on copper patina composition and dissolution during four years of outdoor urban exposure10.1016/j.culher.2010.02.001 ↗
12. Comparison of organic coating accelerated tests and natural weathering considering meteorological data10.1016/j.porgcoat.2006.09.036 ↗
13. (2013). ISO 16474–3 Paints and Varnishes—Methods of Exposure to Laboratory Light Sources—Part 3: Fluorescent UV Lamps, International Organization for Standardization (ISO).
14. (2012). The PVGIS Solar Radiation Database, Institute for Energy and Transport (IET), Joint Research Centre, European Commission.
15. (1999). EN 1015–19 Methods of Test for Mortar for Masonry. Determination of Water Vapour Permeability of Hardened Rendering and Plastering Mortars, European Committee for Standardization.
16. (1999). ISO 4287 Geometrical Product Specifications (GPS)—Surface Texture: Profile Method—Terms, Definitions and Surface Texture Parameters, International Organization for Standardization (ISO).
17. Gagné, L. (2014). Evaluation of Two Sacrificial Anti-Graffiti Polysaccharide Coatings for the Conservation of Outdoor Contemporary Murals. [Ph.D. Thesis, Queen’s University].
18. Test of some antigraffiti systems for preservation of sandstone monuments
19. Comparative study of the variation of the hydric properties and aspect of natural stone and brick after the application of 4 types of anti-graffiti10.3989/mc.2010.45507 ↗
20. Definition of the procedure to determine the suitability and durability of an anti-graffiti product for application on cultural heritage porous materials10.1016/j.culher.2011.07.004 ↗
21. TL AGS-Beton (2012). Technische Lieferbedingungen für Anti-Graffiti-Systeme auf Beton, Federal Highway Research Institute (BASt). (In German).
22. Blistering and degradation of polyurethane coatings under different accelerated weathering tests10.1016/S0141-3910(02)00085-X ↗
23. García Mercero, O. (2008). Design and Study of the Behaviour of a New Antigraffiti Concept Specific for Its Application in Cultural Heritage. [Ph.D. Thesis, Universidad del País Vasco].
24. Urquhart, D. (1999). The Treatment of Graffiti on Historic Surfaces.