Technical Characteristics and Wear-Resistant Mechanism of Nano Coatings: A Review
Source abstract
Abstract
Nano-coating has been a hot issue in recent years. It has good volume effect and surface effect, and can effectively improve the mechanical properties, corrosion resistance and wear resistance of the coatings. It is important to improve the wear resistance of the material surface. The successful preparation of nano-coatings directly affects the application of nano-coatings. Firstly, the preparation methods of conventional surface coatings such as chemical vapor deposition and physical vapor deposition, as well as the newly developed surface coating preparation methods such as sol-gel method, laser cladding and thermal spraying are reviewed in detail. The preparation principle, advantages and disadvantages and the application of each preparation method in nano-coating are analyzed and summarized. Secondly, the types of nano-coating materials are summarized and analyzed by inorganic/inorganic nanomaterial coatings and organic/inorganic nanomaterial coatings, and their research progress is summarized. Finally, the wear-resistant mechanism of nano-coatings is revealed from three aspects: grain refinement, phase transformation toughening mechanism and nano-effects. The application prospects of nano-coatings and the development potential combined with 3D technology are prospected.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Measurement and Testing Engineering, China Jiliang University, Hangzhou 310018, China
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China
Funding
the Zhejiang Provincial Natural Science Foundation of China · the National Natural Science Foundation of China
References (87)
Show source-provided references
1. Nanocrystalline materials10.1016/0079-6425(89)90001-7 ↗
2. Biogenic nanomaterials: Synthesis, characterization, growth mechanism, and biomedical applications10.1016/j.mimet.2018.12.008 ↗
3. Progress in Chinese tribology research and application
4. Corrosion and wear properties of FeCrMnCoSi HVOF coatings10.1016/j.surfcoat.2018.10.101 ↗
5. Roughness evolution during chemical vapor deposition10.1016/j.matchemphys.2008.06.008 ↗
6. Chemical vapour deposition of coatings10.1016/S0079-6425(01)00009-3 ↗
7. Abbasi, H., Antunes, M., and Velasco, J.I. (2020). Effects of Graphene Nanoplatelets and Cellular Structure on the Thermal Conductivity of Polysulfone Nanocomposite Foams. Polymers, 12.10.3390/polym12010025 ↗
8. Man-made diamonds10.1038/176051a0 ↗
9. An integrative approach to coating/carbide substrate design of CVD and PVD coated cutting tools during the machining of austenitic stainless steel10.1016/j.ceramint.2019.10.259 ↗
10. Wear performance of nano-engineered boron doped graded layer CVD diamond coated cutting tool for machining of Al-SiC MMC10.1016/j.wear.2018.12.004 ↗
11. Influence of the Al content on mechanical properties of CVD aluminum titanium nitride coatings10.1016/j.ijrmhm.2017.11.028 ↗
12. Comparative analysis of graphene grown on copper and nickel sheet by microwave plasma chemical vapor deposition10.1016/j.vacuum.2018.03.060 ↗
13. Mattox, D.M. (2010). Handbook of Physical Vapor Deposition (PVD) Processing, William Andrew Publishing. [2nd ed.].10.1016/B978-0-8155-2037-5.00008-3 ↗
14. On the physical vapour deposition (PVD): Evolution of magnetron sputtering processes for industrial applications10.1016/j.promfg.2018.10.125 ↗
15. Ionized physical vapor deposition (IPVD): A review of technology and applications10.1016/j.tsf.2006.03.033 ↗
16. Electron beam assisted physical vapor deposition of very hard TiCN coating with nanoscale characters10.1016/j.ceramint.2019.04.213 ↗
17. Synthesis and characterization of multilayered TiC/TiB2 coatings deposited by ion beam assisted, electron beam-physical vapor deposition (EB-PVD)10.1016/S0257-8972(02)00666-7 ↗
18. Ionized Physical Vapour Deposition combined with PECVD, for synthesis of carbon–metal nanocomposite thin films10.1016/j.solidstatesciences.2009.05.008 ↗
19. Oxidation and hot corrosion behavior of Al2O3/YSZ coatings prepared by cathode plasma electrolytic deposition10.1016/j.corsci.2016.03.017 ↗
20. Characterization of nano-composite TiN-Sb coating produced with hybrid physical vapor deposition system10.1016/j.tsf.2006.10.138 ↗
21. Wear behavior of adaptive nano-multilayered AlTiN/MexN PVD coatings during machining of aerospace alloys10.1016/j.triboint.2010.02.008 ↗
22. One-pot synthesis and self-assembly of anti-wear octadecyltrichlorosilane/silica nanoparticles composite films on silicon10.1016/j.apsusc.2019.145187 ↗
23. High performance, flexible and renewable nano-biocomposite artificial muscle based on mesoporous cellulose/ionic liquid electrolyte membrane10.1016/j.snb.2018.12.073 ↗
24. Sol-Gel processing of silica nanoparticles and their applications10.1016/j.cis.2014.10.007 ↗
25. Structural, optical, and electrical properties of ZnO thin films deposited by sol-gel dip-coating process at low temperature10.1007/s13391-013-3312-y ↗
26. AZO Thin Films by Sol-Gel Process for Integrated Optics10.3390/coatings3030126 ↗
27. A review of hydroxyapatite-based coating techniques: Sol-gel and electrochemical depositions on biocompatible metals10.1016/j.jmbbm.2015.11.031 ↗
28. Chitosan-based polymer gel paper actuators coated with multi-wall carbon nanotubes and MnO2 composite electrode10.1007/s10570-017-1416-5 ↗
29. Building the silicon carbide nanowire network on the surface of carbon fibers: Enhanced interfacial adhesion and high-performance wear resistance10.1016/j.ceramint.2019.07.286 ↗
30. Sol–gel coatings on metals for corrosion protection10.1016/j.porgcoat.2008.08.010 ↗
31. Enhanced wettability and wear resistance on TiO2/PDA thin films prepared by sol-gel dip coating10.1016/j.surfcoat.2019.07.051 ↗
32. New architectured hybrid sol-gel coatings for wear and corrosion protection of low-carbon steel10.1016/j.porgcoat.2016.06.015 ↗
33. Wang, H.J., Chen, T., Cong, W.L., and Liu, D.F. (2019). Laser cladding of Ti-based ceramic coatings on Ti6Al4V alloy: Effects of CeO2 nanoparticles additive on wear performance. Coatings, 9.10.3390/coatings9020109 ↗
34. Microstructure, wear, and oxidation resistance of nanostructured carbide-strengthened cobalt-based composite coatings on Invar alloys by laser cladding10.1016/j.surfcoat.2019.125188 ↗
35. Effect of laser reheat post-treatment on the microstructural characteristics of laser-cladded ultra-high strength steel10.1016/j.surfcoat.2019.05.021 ↗
36. Gu, Y.Q., Yu, S.W., Mou, J.G., Wu, D.H., and Zheng, S.H. (2020). Research Progress on the Collaborative Drag Reduction Effect of Polymers and Surfactants. Materials, 13.10.3390/ma13020444 ↗
37. Resent Research Status on Laser Cladding as Erosion Resistance Technique - An Overview10.1016/j.matpr.2017.06.291 ↗
38. Microstructure and properties of Cu/TiB2 wear resistance composite coating on H13 steel prepared by in-situ laser cladding10.1016/j.optlastec.2018.07.036 ↗
39. Identifying defects and problems in laser cladding and suggestions of some remedies for the same10.1016/j.matpr.2018.02.297 ↗
40. Effects of CeO2 on microstructure and properties of TiC/Ti2Ni reinforced Ti-based laser cladding composite coatings10.1016/j.optlaseng.2019.03.001 ↗
41. Study on the laser cladding of FeCrNi coating10.1016/j.ijleo.2018.10.062 ↗
42. Laser cladding Ni-based alloy/nano-Ni encapsulated h-BN self-lubricating composite coatings10.1016/j.surfcoat.2017.06.079 ↗
43. Microstructure and tribological properties of laser cladded self-lubricating nickel-base composite coatings containing nano-Cu and h-BN solid lubricants10.1016/j.surfcoat.2018.12.017 ↗
44. A novel Ti-Fe composite coating deposited using laser cladding of low cost recycled nano-crystalline titanium powder10.1016/j.matlet.2018.07.038 ↗
45. Application of hardmetals as thermal spray coatings10.1016/j.ijrmhm.2014.09.029 ↗
46. Hard but slippery-titanium hardmetal coatings have industrial potential10.1016/S0026-0657(05)70410-0 ↗
47. Li, T.C., Liu, Y., Liu, B., Guo, W.M., and Xu, L.Y. (2017). Microstructure and wear behavior of FeCoCrNiMo0.2 high entropy coatings prepared by air plasma spray and the high velocity Oxy-fuel spray processes. Coatings, 7.10.3390/coatings7090151 ↗
48. Wear and corrosion resistant performance of thermal-sprayed Fe-based amorphous coatings: A review10.1016/j.surfcoat.2019.124896 ↗
49. Influence of microstructure flaws on the tribological performance of Cr-based thermal-sprayed ceramic coatings10.1016/j.ceramint.2019.06.188 ↗
50. Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes10.1016/j.surfcoat.2019.04.067 ↗
51. Wear resistance and adhesive failure of thermal spray ceramic coatings deposited onto graphite in response to ultrasonic nanocrystal surface modification technique10.1016/j.apsusc.2017.11.013 ↗
52. Small punch creep testing of thermally sprayed Stellite 6 coating: A comparative study of as-received vs post-heat treatment10.1016/j.msea.2019.02.030 ↗
53. Characterizing the micro-impact fatigue behavior of APS and HVOF-sprayed ceramic coatings10.1016/j.surfcoat.2018.10.097 ↗
54. High pressure synthesis of nanophase WC/Co/Dlamond powders: Implications for thermal spraying
55. Simultaneous increase of friction coefficient and wear resistance through HVOF sprayed WC-(nano WC-Co)10.1016/j.surfcoat.2019.02.042 ↗
56. Wu, Y.M., Chen, X.M., Zhou, X.L., Mao, P.Z., and Fang, Y. (2017). Surface Engineering and Remanufacturing Technology-New Surface Technology for Hydraulic Machinery and Hydraulic Metal Structures, The Yellow River Water Conservancy Press.
57. Effect of high temperature and oxidation on microstructure and properties of WC-10Co4Cr coatings
58. Tribological behavior of WC-Co HVAF-sprayed composite coatings modified by nano-sized TiC addition10.1016/j.surfcoat.2018.09.017 ↗
59. Sliding wear behavior of HVOF sprayed WC-(nano-WC-Co) coating at elevated temperatures10.1016/j.matchemphys.2017.09.066 ↗
60. Weibull analysis of hardness distribution in detonation sprayed nano-structured WC-12Co coatings10.1016/j.surfcoat.2017.04.028 ↗
61. Microstructure and indentation mechanical properties of plasma sprayed nano-bimodal and conventional ZrO2-8wt%Y2O3 thermal barrier coatings10.1016/j.vacuum.2011.10.029 ↗
62. Microstructures and properties of plasma sprayed FeAl/CeO2/ZrO2 nano-composite coating10.1016/j.apsusc.2010.01.121 ↗
63. Microstructure and properties of composite coatings prepared by plasma spraying ZrO2-B2O3-Al composite powders10.1016/j.jallcom.2017.12.335 ↗
64. Fabrication and properties of triplex NiCrAlY/nano Al2O3·13%TiO2/nano TiO2 coatings on a magnesium alloy by atmospheric plasma spraying method10.1016/j.jallcom.2015.05.106 ↗
65. Effects of treatment process and nano-additives on the microstructure and properties of Al2O3-TiO2 nanocomposite powders used for plasma spraying10.1016/j.powtec.2018.07.038 ↗
66. Oxidation behavior of HVOF sprayed nanocrystalline NiCrAlY powder10.1016/S0921-5093(02)00008-4 ↗
67. Thermally induced metallurgical processes in Cr3C2-NiCr thermal spray coatings as a function of carbide dissolution10.1016/j.jallcom.2017.08.246 ↗
68. Developing status of nanocoaters and coating technology
69. Two-step method to deposit ZrO2 coating on carbon fiber: Preparation, characterization, and performance in SiC composites10.1016/j.ceramint.2018.03.268 ↗
70. Challenges in plasma spraying of 8% Y2O3-ZrO2 thermal barrier coatings on Al alloy automotive piston and influence of vibration and thermal fatigue on coating characteristics10.1016/j.matpr.2018.10.185 ↗
71. Enhanced interface adhesion by in-situ oxidation within metal-ceramic coatings10.1016/j.ceramint.2018.08.332 ↗
72. Parametric computational analysis of indentation-induced shear band formation in metal-ceramic multilayer coatings10.1016/j.surfcoat.2018.04.055 ↗
73. One-dimensional organic–inorganic hybrid nanomaterials10.1016/j.polymer.2010.06.064 ↗
74. Corrosion protection of mild steel in different aqueous media via epoxy/nanomaterial coating: Preparation, characterization and mathematical views10.1016/j.jmrt.2018.03.003 ↗
75. Stimuli-responsive switchable organic-inorganic nanocomposite materials10.1016/j.nantod.2018.10.006 ↗
76. Numerical prediction of thermo-hydrodynamics on the gas-lubricated film in wedge-shaped microchannel
77. Organic-Inorganic Hybrid Pillarene-Based Nanomaterial for Label-Free Sensing and Catalysis10.1016/j.matt.2019.03.005 ↗
78. Influence of liquid water content on wind turbine blade icing by numerical simulation
79. Preparation and anticorrosion properties of silane grafted nano-silica/epoxy composite coating
80. Superhydrophobic organic and inorganic clay nanocomposites for epoxy steel coatings10.1016/j.porgcoat.2019.105502 ↗
81. Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review10.1016/S1002-0721(16)60061-3 ↗
82. Effect of microstructure and mechanical properties on wear behavior of plasma-sprayed Cr2O3-YSZ-SiC coatings10.1016/j.ceramint.2018.11.226 ↗
83. Microstructure, phase composition and mechanical properties of plasma sprayed Al2O3, Cr2O3 and Cr2O3-Al2O3 composite coatings10.1016/j.surfcoat.2017.03.022 ↗
84. Recent advances in the investigation of nanoeffects of Fischer-Tropsch catalysts10.1016/j.cattod.2017.09.019 ↗
85. Efficient one-step fabrication of superhydrophobic nano-TiO2/TMPSi ceramic composite coating with enhanced corrosion resistance on 316L10.1016/j.ceramint.2019.09.137 ↗
86. Influence of ceramic particles and process parameters on residual stress of flame-sprayed Fe-based coatings10.1016/j.surfcoat.2018.08.069 ↗
87. Microstructure of nanometer Al2O3 dispersion strengthened Ni-based high-temperature protective coatings by laser cladding10.1016/S1003-6326(08)60317-9 ↗