Research Status and Prospect of Friction Stir Processing Technology
Source abstract
Abstract
Friction stir processing (FSP) is a novel solid-phase processing technique that is derived from friction stir welding (FSW). The microstructure of the base metal can be modified with the friction heat and stir function during processing. It can be used to fabricate surface composites and in situ composites by adding reinforced particles into the metal matrix via FSP. Friction stir processing can significantly improve the hardness, wear resistance, ductility, etc., while preventing defects caused by material melting. It is an ideal material processing technology and has good prospects in the field of superplastic materials and for the preparation of metal matrix composites. This paper reviews research developments into the principle, process, and applications of FSP technology as well as its future research directions and development prospects.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials Ministry of Education, Shandong University, Jinan 250061, China
References (83)
Show source-provided references
1. High strain rate superplasticity in a friction stir processed 7075 Al alloy10.1016/S1359-6462(99)00329-2 ↗
2. Friction stir welding and processing10.1016/j.mser.2005.07.001 ↗
3. Friction stir processing technology: A review10.1007/s11661-007-9459-0 ↗
4. Friction stir based welding and processing technologies—Processes, parameters, microstructures and applications: A review10.1016/j.jmst.2017.11.029 ↗
5. Tamadon, A., Pons, D.J., Sued, K., and Clucas, D. (2017). Development of metallographic etchants for the microstructure evolution of A6082-T6 BFSW welds. Metals, 7.10.3390/met7100423 ↗
6. Microstructure and texture evolution of an Mg-Gd-Y-Nd-Zr alloy during friction stir processing10.1016/j.jallcom.2015.11.034 ↗
7. Microstructure evolution and superelastic behavior in Ti-35Nb-2Ta-3Zr alloy processed by friction stir processing10.1016/j.actamat.2017.03.079 ↗
8. Microstructural evolution and mechanical properties of Mg-Zn-Y-Zr alloy during friction stir processing10.1016/j.jallcom.2016.12.068 ↗
9. Tamadon, A., Pons, D.J., Sued, K., and Clucas, D. (2018). Thermomechanical grain refinement in AA6082-T6 thin plates under bobbin friction stir welding. Metals, 8.10.3390/met8060375 ↗
10. Achieving high strain rate superplasticity in Mg-Zn-Y-Zr alloy produced by friction stir processing10.1016/j.scriptamat.2011.04.041 ↗
11. The influence of friction stir processing parameters on microstructure of as-cast NiAl bronze
12. Effect of friction stir processing on pitting corrosion and intergranular attack of 7075 aluminum alloy10.1016/j.jmst.2016.07.008 ↗
13. Fabrication of a high strength ultra-fine grained Al-Mg-SiC nanocomposite by multi-step friction-stir processing10.1016/j.msea.2017.05.065 ↗
14. Role of friction stir processing parameters on microstructure and microhardness of boron carbide particulate reinforced copper surface composites
15. Tamadon, A., Pons, D.J., Sued, K., and Clucas, D. (2018). Formation mechanisms for entry and exit defects in bobbin friction stir welding. Metals, 8.10.3390/met8010033 ↗
16. Influence of process parameter on microstructure of AZ31 magnesium alloy in friction stir processing
17. On the role of processing parameters in producing Cu/SiC metal matrix composites via friction stir processing: Investigating microstructure, microhardness, wear and tensile behavior10.1016/j.matchar.2010.11.005 ↗
18. Influence of processing parameters on thermal field in Mg-Nd-Zn-Zr alloy during friction stir processing10.1016/j.matdes.2016.01.044 ↗
19. Effect of process parameters on abnormal grain growth during friction stir processing of a cast Al alloy10.1016/j.msea.2010.08.049 ↗
20. Severe friction stir processing of an Al-Zn-Mg-Cu alloy: Misorientation and its influence on superplasticity10.1016/j.matdes.2017.10.008 ↗
21. Effect of processing parameters on microstructure and mechanical properties of an Al-Al11Ce3-Al2O3 in-situ composite produced by friction stir processing10.1007/s11661-009-0115-8 ↗
22. Effect of processing parameters on fabrication of Al-Mg/Cu composites via friction stir processing10.1016/j.matdes.2012.02.042 ↗
23. In situ formation of Al-Al3Ni composites on commercially pure aluminium by friction stir processing10.1007/s00170-014-6162-3 ↗
24. Effect of friction stir processing parameters on the microstructural and electrical properties of copper10.1007/s00170-015-7141-z ↗
25. Effects of tilt angle on the properties of dissimilar friction stir welding copper to aluminum10.1080/10426914.2014.994754 ↗
26. Optimisation of friction stir processing parameters to produce sound and fine grain layers in pure magnesium10.1179/1362171813Y.0000000186 ↗
27. Cryogenic friction-stir processing of ultrafine-grained Al-Mg-TiO2 nanocomposites10.1016/j.msea.2014.10.048 ↗
28. Influence of multi-pass friction stir processing on the microstructure and mechanical properties of Al-5083 alloy10.1016/j.msea.2015.10.057 ↗
29. Effect of multi-pass friction stir processing on microstructure and mechanical properties of Al3Ti/A356 composites10.1016/j.matchar.2015.05.019 ↗
30. Fabrication of a new Al-Mg/graphene nanocomposite by multi-pass friction-stir processing: Dispersion, microstructure, stability, and strengthening10.1016/j.matchar.2017.08.009 ↗
31. Fabrication and characterization of in-situ Al/Nb metal/intermetallic surface composite by friction stir processing10.1016/j.msea.2017.03.014 ↗
32. Mechanical characterization of Al/Ti-6Al-4V surface composite fabricated via FSP: A comparison of tool geometry and number of passes10.1088/2053-1591/aadce5 ↗
33. Surface enhancement of cold work tool steels by friction stir processing with a pinless tool10.1016/j.apsusc.2014.01.094 ↗
34. Effect of friction stir processing tool probe on fabrication of SiC particle reinforced composite on aluminium surface10.1179/136217109X406974 ↗
35. In-situ synthesized Al3Ti-Al surface composites by friction stir processing
36. Characterization of boron carbide particulate reinforced in situ copper surface composites synthesized using friction stir processing10.1016/j.matchar.2013.07.001 ↗
37. Fabrication of Al5083 surface composites reinforced by CNTs and cerium oxide nano particles via friction stir processing10.1016/j.jallcom.2014.10.158 ↗
38. Fabrication of metal matrix composites by friction stir processing with different Particles and processing parameters10.1016/j.msea.2014.12.077 ↗
39. Friction stir surfacing of cast A356 aluminium-silicon alloy with boron carbide and molybdenum disulphide powders10.1016/j.dt.2014.09.004 ↗
40. Corrosion behavior of magnesium and magnesium-hydroxyapatite composite fabricated by friction stir processing in Dulbecco’s phosphate buffered saline10.1016/j.corsci.2016.01.002 ↗
41. Influence of friction stir processing tool design on microstructure and superplastic behavior of Al-Mg alloys10.1016/j.msea.2016.05.115 ↗
42. Influence of pin profile on the tool plunge stage in friction stir processing of Al-Zn-Mg-Cu alloy10.1007/s12666-016-0903-y ↗
43. Friction stir processing: A novel technique for fabrication of surface composite10.1016/S0921-5093(02)00199-5 ↗
44. Interfacial bonding mechanisms between aluminum and titanium during cold gas spraying followed by friction-stir modification10.1016/j.apsusc.2018.08.156 ↗
45. Cold sprayed AA2024/Al2O3 metal matrix composites improved by friction stir processing: Microstructure characterization, mechanical performance and strengthening mechanisms10.1016/j.jallcom.2017.11.132 ↗
46. Friction stir processing of AlSi10Mg parts produced by selective laser melting10.1016/j.jmatprotec.2018.08.030 ↗
47. Friction stir surfacing route: effective strategy for the enhancement of wear resistance of titanium alloy10.1007/s12666-013-0254-x ↗
48. Friction stir processing for enhancement of wear resistance of ZM21 magnesium alloy10.1007/s12666-012-0163-4 ↗
49. A novel method of in-situ fabrication of Mg surface composites by friction stir process
50. Improvement the wear behavior of low carbon steels by friction stir processing10.1088/1757-899X/174/1/012058 ↗
51. Friction stir processing of A-286 stainless steel: Microstructural evolution during wear10.1016/j.wear.2016.03.018 ↗
52. Friction stir processing of aluminum alloy AA7075: Microstructure, surface chemistry and corrosion resistance10.1016/j.corsci.2016.02.006 ↗
53. Principles of superplasticity in ultrafine-grained materials10.1007/s10853-006-0954-2 ↗
54. On constitutive-equations for various diffusion-controlled creep mechanisms10.1051/rphysap:01988002304062500 ↗
55. Superplastic GBS Constitutive equation incorporating average grain misorientation dependence10.4028/www.scientific.net/MSF.941.1501 ↗
56. Ultra-grain refinement and enhanced low-temperature superplasticity in a friction stir-processed Ti-6Al-4V alloy10.1016/j.msea.2018.03.009 ↗
57. High strain rate superplasticity in a commercial 2024 Al alloy via friction stir processing10.1016/S0921-5093(03)00367-8 ↗
58. Superplasticity in cast A356 induced via friction stir processing10.1016/j.scriptamat.2004.01.012 ↗
59. Multiple passes of friction stir processing for the creation of superplastic 7075 aluminum10.1016/j.msea.2007.01.141 ↗
60. Superplastic deformation mechanism of an ultrafine-grained aluminum alloy produced by friction stir processing10.1016/j.actamat.2010.05.003 ↗
61. Superplastic behavior of friction stir processed ZK60 magnesium alloy10.2320/matertrans.M2011231 ↗
62. High strain rate superplasticity of a fine-grained AZ91 magnesium alloy prepared by submerged friction stir processing10.1016/j.msea.2013.01.026 ↗
63. Investigations on superplastic forming of friction stir-processed AA6063-T6 aluminum alloy10.1080/10426914.2012.667895 ↗
64. Superplastic behavior and microstructure evolution of a fine-grained Mg-Y-Nd alloy processed by submerged friction stir processing10.1016/j.msea.2015.06.086 ↗
65. Effects of friction stir processing on the microstructure and superplasticity of in situ nano-ZrB2/2024Al composite10.1016/j.pnsc.2016.01.009 ↗
66. Grain size versus microstructural stability in the high strain rate superplastic response of a severely friction stir processed Al-Zn-Mg-Cu alloy10.1016/j.msea.2016.10.113 ↗
67. Superplasticity behavior and deformation mechanism of the in-situ Al3Zr/6063Al composites processed by friction stir processing10.1016/j.jallcom.2017.03.246 ↗
68. Effects of plastic deformation on microstructure and superplasticity of the in situ AI(3)Ti/2024AI composites10.1088/2053-1591/aac0d0 ↗
69. Formations of AZ91/Al2O3 nano-composite layer by friction stir processing10.1016/j.jma.2016.11.002 ↗
70. Mahmoud, E.R.I., and Tash, M.M. (2016). Characterization of aluminum-based-surface matrix composites with iron and iron oxide fabricated by friction stir processing. Materials, 9.10.3390/ma9070505 ↗
71. Fabrication of AZ31/CNT surface nano-composite by double-pass friction stir processing10.1515/amm-2017-0149 ↗
72. Moustafa, E. (2017). Effect of multi-pass friction stir processing on mechanical properties for AA2024/Al2O3 nanocomposites. Materials, 10.10.3390/ma10091053 ↗
73. Fernandez, J.B., Macias, E.J., Muro, J., Caputi, L.S., Miriello, D., De Luca, R., Roca, A.S., and Fals, H.D.C. (2018). Tribological behavior of AA1050H24-graphene nanocomposite obtained by friction stir processing. Metals, 8.10.3390/met8020113 ↗
74. Effect of Al2O3 and SiC nano reinforcements on microstructure, mechanical and wear properties of surface nanocomposites fabricated by friction stir processing
75. Microstructures, mechanical, and biological properties of a novel Ti-6V-4V/zinc surface nanocomposite prepared by friction stir processing10.2147/IJN.S154260 ↗
76. Microstructural and mechanical characteristics of in situ metal matrix composites10.1016/S0927-796X(00)00024-3 ↗
77. Ultrafine-grained Al-Al2Cu composite produced in situ by friction stir processing10.1016/j.scriptamat.2005.04.006 ↗
78. In situ synthesizing Al3Ni for fabrication of intermetallic-reinforced aluminum alloy composites by friction stir processing10.1016/j.msea.2012.04.070 ↗
79. The microstructure and mechanical properties of an Al-CuO in-situ composite produced using friction stir processing10.1016/j.matlet.2012.09.028 ↗
80. Aluminum based in situ nanocomposite produced from Al-Mg-CuO powder mixture by using friction stir processing10.1016/j.matlet.2013.03.074 ↗
81. Intermetallic-reinforced aluminum matrix composites produced in situ by friction stir processing10.1016/j.matlet.2006.07.021 ↗
82. In-situ aluminothermal reduction synthesis of Ti3AlC2 aluminium composite by friction stir processing10.1016/j.promfg.2016.12.041 ↗
83. Influence of friction stir processing on microstructure and properties of AA7075/TiB2 in situ composite10.1016/j.jallcom.2015.10.108 ↗