journal article·2018-07-03Open access

Alginate and Chitosan as a Functional Barrier for Paper-Based Packaging Materials

Samir Kopacic, Andrea Walzl, Armin Zankel, Erich Leitner, Wolfgang Bauer

Coatings· Volume 8· Issue 7

Abstract

Paper-based food packaging materials are widely used, renewable, and biodegradable. Because of its porous structure, paper has poor or no barrier performance against grease, water vapor, water, and volatile organic compounds. Moreover, recycled paperboard can be a source of organic residuals that are able to migrate into packed food. Two different types of paperboard produced from primary and secondary cellulosic fibers were coated using renewable materials, such as alginate and chitosan, and comprehensive barrier measurements showed multifunctional barrier properties of these two biomaterials. Both paper substrates were successfully coated using a draw-down coater, and the measured air permeability of the coated samples was 0 mL·min−1. Grease resistance was improved, while it was possible to reduce water vapor transmission, the migration of mineral oil saturated hydrocarbons and mineral oil aromatic hydrocarbons (MOSH/MOAH), and the permeation of volatile compounds for both paper substrates when compared with uncoated substrates. Wettability and water absorptiveness of chitosan- and alginate-coated papers were found to be substrate-dependent properties, and could be significantly affected by bio-based coatings. In summary, industrially produced paperboard was upgraded by coating it with the naturally biodegradable biopolymers, alginate and chitosan, thus achieving extraordinary barrier performance for various applications within the packaging industry.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nanocomposite Films for Food Packaging · Material Properties and Processing · Recycling and Waste Management Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Paper, Pulp and Fibre Technology, Graz University of Technology, Inffeldgasse 23, 8010 Graz, Austria

Institute of Analytical Chemistry and Food Chemistry, Graz University of Technology, Stremayrgasse 9/2, 8010 Graz, Austria

Institute for Electron Microscopy and Nanoanalysis, NAWI Graz, Graz University of Technology and Centre for Electron Microscopy, Steyrergasse 17, 8010 Graz, Austria

Funding

Österreichische Forschungsförderungsgesellschaft

References (46)

Show source-provided references
1. Coltelli, M.-B., Wild, F., Bugnicourt, E., Cinelli, P., Lindner, M., Schmid, M., Weckel, V., Müller, K., Rodriguez, P., and Staebler, A. (2016). State of the Art in the Development and Properties of Protein-Based Films and Coatings and Their Applicability to Cellulose Based Products: An Extensive Review. Coatings, 6.10.3390/coatings6010001 ↗
2. New ways to enhance the functionality of paperboard by surface treatment—A review10.1002/pts.823 ↗
3. Renewable fibers and bio-based materials for packaging applications—A review of recent developments10.15376/biores.7.2.2506-2552 ↗
4. Biobased mineral-oil barrier-coated food-packaging films10.1002/app.44586 ↗
5. (2012). Messung von Mineralöl—Kohlenwasserstoffen in Lebensmitteln und Verpackungsmaterialien, Berlin und Kantonales Labor Zürich.
6. EFSA Panel on Contaminants in the Food Chain (CONTAM) (2012). Scientific Opinion on Mineral Oil Hydrocarbons in Food. EFSA J., 10, 2704.10.2903/j.efsa.2012.2704 ↗
7. On-line coupled high performance liquid chromatography–gas chromatography for the analysis of contamination by mineral oil. Part 2: Migration from paperboard into dry foods: Interpretation of chromatograms10.1016/j.chroma.2012.05.096 ↗
8. On-line coupled high performance liquid chromatography–gas chromatography for the analysis of contamination by mineral oil. Part 1: Method of analysis10.1016/j.chroma.2012.05.095 ↗
9. Giles, H.F., Wagner, J.R., and Mount, E.M. (2014). Extrusion: The Definitive Processing Guide and Handbook, William Andrew. [2nd ed.].
10. The Use of Aqueous-based Emulsion Polymers as Moisture Barrier Coatings for Carton Boards10.1002/apj.5500120111 ↗
11. Barriers against the Migration of Mineral Oil from Paperboard Food Packaging: Experimental Determination of Breakthrough Periods10.1002/pts.982 ↗
12. Active Packaging Coatings10.3390/coatings5040771 ↗
13. Kaiser, K., Schmid, M., and Schlummer, M. (2018). Recycling of Polymer-Based Multilayer Packaging: A Review. Recycling, 3.10.3390/recycling3010001 ↗
14. The influence of nanofillers on physical–chemical properties of polysaccharide-based film intended for food packaging
15. Calcium Alginate Films: Thermal Properties and Permeability to Sorbate and Ascorbate10.1111/j.1365-2621.1996.tb14189.x ↗
16. Evaluation of the Antimicrobial Potential of Alginate and Alginate/Chitosan Films Containing Potassium Sorbate and Natamycin
17. Production of Coated Papers with Improved Properties by Using a Water-Soluble Chitosan Derivative10.1021/ie100573z ↗
18. Enhancement of the Wet Properties of Transparent Chitosan−Acetic-Acid−Salt Films Using Microfibrillated Cellulose10.1021/bm070246x ↗
19. Application of chitosan emulsion as a coating on Kraft paper10.1002/pi.3023 ↗
20. Effects of drying methods and plasticizer concentration on some physical and mechanical properties of edible chitosan films10.1016/j.jfoodeng.2010.02.025 ↗
21. Vrabič Brodnjak, U., Jesih, A., and Gregor-Svetec, D. (2018). Chitosan Based Regenerated Cellulose Fibers Functionalized with Plasma and Ultrasound. Coatings, 8.10.3390/coatings8040133 ↗
22. Biopolymer Coatings on Paper Packaging Materials10.1111/j.1541-4337.2009.00095.x ↗
23. Impact of Biodegradable Chitosan-Based Coating on Barrier Properties of Papers10.7569/JRM.2014.634105 ↗
24. Bio-hybrid nanocomposite coatings from sonicated chitosan and nanoclay
25. Hydrophobization and Antimicrobial Activity of Chitosan and Paper-Based Packaging Material10.1021/bm9009528 ↗
26. Preparation and properties of chitosan nanocomposites with nanofillers of different dimensions10.1016/j.polymdegradstab.2008.09.008 ↗
27. Water resistance and mechanical properties of biopolymer (alginate and soy protein) coated paperboards10.1016/j.lwt.2005.05.008 ↗
28. Packaging-related properties of protein- and chitosan-coated paper
29. Bio-Based Coatings for Paper Applications10.3390/coatings5040887 ↗
30. Influence of base paper on the barrier properties of chitosan-coated papers10.3183/npprj-2006-21-05-p685-689 ↗
31. (2008). T 402 SP-08 Standard Conditioning and Testing Atmospheres for Paper, Board, Pulp Handsheets, and Related Products, TAPPI Standards Department.
32. (2017). ISO 536:2012 Paper and Board—Determination of Grammage, International Organization for Standardization.
33. (2011). EN ISO 534:2011 Paper and Board—Determination of Thickness, Density and Specific Volume, European Committee for Standardization.
34. (2013). ISO/DIS 5636-3 Paper and Board—Determination of Air Permeance—Part 3: Bendtsen Method, International Organization for Standardization.
35. (2012). ISO/DIS 8791-2 Paper and Board—Determination of Roughness/Smoothness—Part 2: Bendtsen Method, International Organization for Standardization.
36. (2012). T 558 OM-15 Surface wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester, TAPPI Standards Department.
37. (2012). T 559 CM-12 Grease Resistance Test for Paper and Paperboard, TAPPI Standards Department.
38. (2011). EN ISO 535:2014 Paper and Board—Determination of Water Absorptiveness—Cobb Method, European Committee for Standardization.
39. (2009). T 448 OM-09 Water Vapor Transmission Rate of Paper and Paperboard at 23 °C and 50% RH, TAPPI Standards Department.
40. Imaging of the formerly bonded area of individual fibre to fibre joints with SEM and AFM10.1007/s10570-013-0107-0 ↗
41. (2011). Union Guidance on Regulation (Eu) No 10/2011 On Plastic Materials And Articles Intended to Come into Contact With Food as Regards Information in the Supply Chain, European Commission Health and Consumers Directorate-General.
42. Fat resistance properties of chitosan-based paper packaging for food applications
43. Kjellgren, H. (2007). Influence of Paper Properties and Polymer Coatings on Barrier Properties of Greaseproof Paper. [Ph.D. Thesis, Karlstad Univeristy].
44. Enhanced water vapour barrier and grease resistance of paper bilayer-coated with chitosan and beeswax10.1016/j.carbpol.2013.09.097 ↗
45. The diffusion of water vapour trough pulp and paper10.1080/07373939308916896 ↗
46. Taped Barrier Test for Internal Bags Used in Boxes of Recycled Paperboard: The Role of the Paperboard and Its Consequence for the Test10.1002/pts.2268 ↗