Sputtering Physical Vapour Deposition (PVD) Coatings: A Critical Review on Process Improvement and Market Trend Demands
Source abstract
Abstract
Physical vapour deposition (PVD) is a well-known technology that is widely used for the deposition of thin films regarding many demands, namely tribological behaviour improvement, optical enhancement, visual/esthetic upgrading, and many other fields, with a wide range of applications already being perfectly established. Machining tools are, probably, one of the most common applications of this deposition technique, sometimes used together with chemical vapour deposition (CVD) in order to increase their lifespan, decreasing friction, and improving thermal properties. However, the CVD process is carried out at higher temperatures, inducing higher stresses in the coatings and substrate, being used essentially only when the required coating needs to be deposited using this process. In order to improve this technique, several studies have been carried out optimizing the PVD technique by increasing plasma ionization, decreasing dark areas (zones where there is no deposition into the reactor), improving targets use, enhancing atomic bombardment efficiency, or even increasing the deposition rate and optimizing the selection of gases. These studies reveal a huge potential in changing parameters to improve thin film quality, increasing as well the adhesion to the substrate. However, the process of improving energy efficiency regarding the industrial context has not been studied as deeply as required. This study aims to proceed to a review regarding the improvements already studied in order to optimize the sputtering PVD process, trying to relate these improvements with the industrial requirements as a function of product development and market demand.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Industrial Engineering, University of Vigo, Lagoas, 36310-E Marcosende, Spain
School of Engineering, Polytechnic of Porto (ISEP), 4200-072 Porto, Portugal
References (100+)
Show source-provided references
1. Berghaus, B. (1938). Improvements in and Related to the Coating of Articles by Means of Thermally Vapourized Material. (510992), UK Patent.
2. Powell, C.F., Oxley, J.H., and Blocher, J.M. (1966). Vapour Deposition, John Wiley & Sons.10.1149/1.2423765 ↗
3. Holmberg, K., and Matthews, A. (1994). Coatings Tribology: Properties, Techniques and Applications in Surface Engineering, Elsevier Science.10.1016/S0167-8922(08)70748-X ↗
4. Tracton, A.A. (2007). Coatings Technology: Fundamentals, Testing, and Processing Techniques, CRC Press.10.1201/9781420044089 ↗
5. Mattox, D.M. (1998). Handbook of Physical Vapor Deposition (PVD) Processing Film Formation, Adhesion, Surface Preparation and Contamination Control, Knovel.10.1016/B978-081551422-0.50001-2 ↗
6. Adhesion and wear behaviour of NCD coatings on Si3N4 by micro-abrasion tests10.1166/jnn.2009.NS93 ↗
7. TiB2 Nanostructured coating for GFRP injection moulds10.1166/jnn.2011.3772 ↗
8. Flexible hard nanocomposite coatings10.1039/C5RA09586G ↗
9. Different approaches to super hard coatings and nanocomposites10.1016/j.tsf.2004.10.053 ↗
10. Microstructure, mechanical and tribological properties of novel multi-component nanolayered nitride coatings10.1016/j.surfcoat.2005.08.087 ↗
11. Microabrasion wear behaviour of TiAlCrSiN nanostructured coatings10.1016/j.wear.2008.12.063 ↗
12. Characterization of laboratory and industrial CrN/CrCN/diamond-like carbon coatings10.1016/j.tsf.2013.11.042 ↗
13. The composition, structure and surface properties of the titanium-carbon coatings prepared by PVD technique10.1016/j.surfcoat.2016.11.020 ↗
14. Wear resistance of TiAlSiN thin coatings10.1166/jnn.2012.6760 ↗
15. Sam, Z. (2015). Thin Films and Coatings: Toughening and Toughness Characterization, CRC Press. [1st ed.].
16. Review of Physical Vapour Deposition (PVD) Techniques for Hard Coating
17. Mattox, D.M. (2010). Handbook of Physical Vapor Deposition (PVD) Processing, William Andrew.10.1016/B978-0-8155-2037-5.00008-3 ↗
18. Holmberg, K., and Matthews, A. (2009). Coatings Tribology: Properties, Mechanisms, Techniques and Applications in Surface Engineering, Elsevier. [2nd ed.].
19. Tracton, A.A. (2006). Coatings Technology Handbook, CRC Press. [3rd ed.].10.1201/9781420044089 ↗
20. Martin, P.M. (2010). Handbook of Deposition Technologies for Films and Coatings, Elsevier. [3rd ed.].
21. Mattox, D.M. (2003). The Foundations of Vacuum Coating Technology, Noyes Publications.10.1007/978-3-662-10329-6 ↗
22. Microwave plasma chemical vapour deposition diamond nucleation on ferrous substrates with Ti and Cr interlayers10.1016/S0925-9635(02)00029-8 ↗
23. Tiwari, A., and Natarajan, S. (2017). Nanoindentation on Tribological Coatings. Applied Nanoindentation in Advanced Materials, Wiley.10.1002/9781119084501 ↗
24. Tribological behavior of CVD diamond films on steel substrates10.1016/S0043-1648(03)00145-5 ↗
25. Damm, D.D., Contin, A., Barbieri, F.C., Trava-Airoldi, V.J., Barquete, D.M., and Corat, E.J. (2017). Interlayers applied to CVD diamond deposition on steel substrate: A review. Coatings, 7.10.3390/coatings7090141 ↗
26. Trucchi, D.M., Bellucci, A., Girolami, M., Mastellone, M., and Orlando, S. (2017). Surface texturing of CVD diamond assisted by ultra short laser pulses. Coating, 7.10.3390/coatings7110185 ↗
27. Back-analyses of flow parameters of PVD improved soft Bangkok clay with and without vacuum preloading from settlement data and numerical simulations10.1016/j.geotexmem.2014.07.004 ↗
28. Continuum and kinetic simulations of the neutral gas flow in an industrial physical vapor deposition reactor10.1016/j.surfcoat.2013.08.018 ↗
29. CFD Analysis of Sputtered TiN Coating10.1016/j.matpr.2017.06.191 ↗
30. Kapopara, J.M., Mengar, A.R., Chauhan, K.V., Patel, N.P., and Rawal, S.K. (2016, January 14–16). Modelling and analysis of sputter deposited ZrN coating by CFD. Proceedings of the IConAMMA 2016 International Conference on Advances in Materials and Manufacturing Applications, Bangalore, India.10.1088/1757-899X/149/1/012205 ↗
31. Effect of PVD film’s residual stresses on their mechanical properties, brittleness, adhesion and cutting performance of coated tools10.1016/j.cirpj.2016.11.003 ↗
32. Film thickness effect on mechanical properties and milling performance of nano-structured multilayer PVD coated tools10.1016/j.surfcoat.2016.09.026 ↗
33. Fox-Rabinovich, G., Paiva, J.M., Gershman, I., Aramesh, M., Cavelli, D., Yamamoto, K., Dosbaeva, G., and Veldhuis, S. (2016). Control of self-organized criticality through adaptivebehavior of nano-structured thin film coatings. Entropy, 18.10.3390/e18080290 ↗
34. Development of new PVD coatings for magnesium alloys with improved corrosion properties10.1016/j.surfcoat.2014.04.038 ↗
35. Optically transparent and durable Al2O3 coatings for harsh environments by ultra short pulsed laser deposition10.1016/j.optlastec.2017.07.050 ↗
36. Architecture of PVD coatings for metalcutting applications: A review10.1016/j.surfcoat.2014.08.068 ↗
37. Investigation of these lf-healing sliding wear characteristics of NiTi-based PVD coatings on tool steel10.1016/j.wear.2016.08.004 ↗
38. Variations in the cutting performance of PVD-coated tools in milling Ti6Al4V, explained through temperature-dependent coating properties10.1016/j.surfcoat.2016.07.022 ↗
39. Gouveia, R.M., Silva, F.J.G., Reis, P., and Baptista, A.P.M. (2016). Machining duplex stainless steel: Comparative study regarding end mill coated tools. Coatings, 6.10.3390/coatings6040051 ↗
40. Cutting forces and wear analysis of Si3N4 diamond coated tools in high speed machining10.1016/j.vacuum.2008.03.065 ↗
41. Increasing the lifespan of high-pressure die cast molds subjected to severe wear10.1016/j.surfcoat.2017.05.098 ↗
42. Increasing the stamping tools lifespan by using Mo and B4C PVD coatings10.1016/j.surfcoat.2017.06.043 ↗
43. Vereschaka, A., Kataeva, E., Sitnikov, N., Aksenenko, A., Oganyan, G., and Sotova, C. (2018). Influence of Thickness of Multilayered Nano-Structured Coatings Ti-TiN-(TiCrAl)N and Zr-ZrN-(ZrCrNbAl)N on Tool Life of Metal Cutting Tools at Various Cutting Speeds. Coatings, 8.10.3390/coatings8010044 ↗
44. Baptista, A., Silva, F.J.G., Pinto, G., Porteiro, J., Míguez, J., and Fernandes, L. (2018). On the physical vapour deposition (PVD) process evolution. Procedia Manuf., in press.10.1016/j.promfg.2018.10.125 ↗
45. Pinto, G., Silva, F.J.G., Baptista, A., Porteiro, J., Míguez, J., and Fernandes, L. (2018). A critical review on the numerical simulation related to physical vapour deposition. Procedia Manuf., in press.10.1016/j.promfg.2018.10.138 ↗
46. Optimization of processing parameters of in-situ polymerization of pyrrole on woollen textile to improve its thermal conductivity10.1016/j.porgcoat.2017.03.010 ↗
47. Kim, M., Kim, S., Kim, T., Lee, D.K., Seo, B.K., and Lim, C.S. (2017). Mechanical and thermal properties of epoxy composites containing zirconium oxide impregnated halloysite nanotubes. Coatings, 7.10.3390/coatings7120231 ↗
48. Hu, N., Khan, M., Wang, Y., Song, X., Lin, C., Chang, C., and Zeng, Y. (2017). Effect of Microstructure on the Thermal Conductivity of Plasma Sprayed Y2O3 Stabilized Zirconia (8% YSZ). Coatings, 7.10.20944/preprints201709.0095.v1 ↗
49. Mechanical and tribological characterization of TiB2 thin films10.1166/jnn.2012.6759 ↗
50. Silva, F.J.G., Martinho, R.P., Andrade, M., Baptista, A.P.M., and Alexandre, R. (2017). Improving the wear resistance of moulds for the injection of glass fibre–reinforced plastics using PVD coatings: A comparative study. Coatings, 7.10.3390/coatings7020028 ↗
51. Metal release of multilayer coatings by physical vapour deposition (PVD)10.1016/j.proeng.2016.06.612 ↗
52. Tribological behaviour of multi-layered PVD nitride coatings10.1016/S0043-1648(01)00706-2 ↗
53. Wasa, K., Kitabatake, M., and Adachi, H. (2004). Thin Film Materials Technology: Sputtering of Compound Materials, William Andrew.10.1016/B978-081551483-1.50002-2 ↗
54. Decher, G., and Schlenoff, J.B. (2003). Multilayer Thin Films: Sequential Assembly of Nanocomposite Materials, Wiley.10.1002/3527600574 ↗
55. Silva, F.J.G. (2001). Estudo da Estrutura e Comportamento Tribológico de Revestimentos Duros e Ultra-Duros Executados no Vácuo. [Master’s Thesis, FEUP]. (In Portuguese).
56. Effects of Substrate Preparation on the Stress of Nb Thin Films10.1109/TASC.2003.812294 ↗
57. Stress reduction in sputter deposited films using nanostructured compliant layers by high working-gas pressures10.1116/1.1861940 ↗
58. Estrada-Martínez, J.L., Banda, J.A.M., García, U.P., Muñoz, J.R., Muñoz, J.L.F., Lira, M.M., and Ángel, O.Z. (2017). Set-up method on properties of BaxSr1−xTiO3 thin films deposited by RF-magnetron co-sputtering by projecting temperature and stoichiometric effect. Preprints, 2017100043.
59. Plummer, J.D., Deal, M., and Griffin, P.B. (2000). Silicon VLSI Technology: Fundamentals, Practice, and Modeling, Prentice Hall.
60. Substrate-rotation systems and productivity of industrial PVD processes10.1016/S0257-8972(99)00120-6 ↗
61. Martinho, R.P. (2009). Revestimentos PVD Mono e Multicamada Para Moldes Utilizados na Injecção de Plásticos Reforçados. [Master’s Thesis, FEUP]. (In Portuguese).
62. Adhesion of TiC and Ti(C, N) coatings on steel10.1116/1.572845 ↗
63. Ar + H2 plasma etching for improved adhesion of PVD coatings on steel substrates10.1016/j.vacuum.2011.10.028 ↗
64. Articulation of sustainability in the emerging field of nanocoatings10.1016/j.jclepro.2007.04.020 ↗
65. Energy consumption and material fluxes in hard coating deposition processes10.1016/j.surfcoat.2016.04.062 ↗
66. Klocke, F., Döbbeler, B., Binder, M., Kramer, N., Grüter, R., and Lung, D. (2013, January 23–25). Ecological evaluation of PVD and CVD coating systems in metal cutting processes. Proceedings of the 11th Global Conference on Sustainable Manufacturing, Berlin, Germany.
67. Design and evaluation of tribological coatings10.1016/S0043-1648(00)00505-6 ↗
68. Effect of nitrogen-argon flow ratio on the microstructural and mechanical properties of AlSiN thin films prepared by high power impulse magnetron sputtering10.1016/j.surfcoat.2017.01.085 ↗
69. Li, B.S., Wang, T.G., Ding, J., Cai, Y., Shi, J., and Zhang, X. (2018). Influence of N2/Ar Flow Ratio on Microstructure and Properties of the AlCrSiN Coatings Deposited by High-Power Impulse Magnetron Sputtering. Coatings, 8.10.3390/coatings8010003 ↗
70. High power pulsed magnetron sputtering: Fundamentals and applications10.1016/j.jallcom.2008.08.104 ↗
71. Multilayer hard coatings by coordinated substrate rotation modes in industrial PVD deposition systems10.1016/S0257-8972(96)02986-6 ↗
72. High-rate deposition of thick (Cr,Al) ON coatings by high speed physical vapor deposition10.1016/j.surfcoat.2017.05.034 ↗
73. Gaseous material capacity of open plasma jet in plasma spray-physical vapor deposition process10.1016/j.apsusc.2017.09.218 ↗
74. (2018, July 15). Kolzer Vacuum Coating Equipment. Available online: http://www.kolzer.com.
75. (2018, July 15). CemeCon—The Tool Coating. Available online: http://www.cemecon.de/en.
76. (2018, July 15). High Performance Coatings for Tools and Components Oerlikon Balzers. Available online: https://www.oerlikon.com.
77. (2018, October 04). Teer Coatings. Available online: http://www.teercoatings.co.uk/index.php?page=13.
78. Sputtering simulation of multilayer coatings in industrial PVD system with three-fold rotation10.1016/j.vacuum.2007.07.053 ↗
79. PVD and CVD hard coatings
80. Comparison of the large-area reactive sputter processes of ZnO: Al and ITO using industrial size rotatable targets10.1016/j.surfcoat.2015.09.051 ↗
81. Challenges in the industrial deposition of transparent conductive oxide materials by reactive magnetron sputtering from rotatable targets10.1016/j.tsf.2017.03.006 ↗
82. Reactive bipolar pulsed dual magnetron sputtering of ZrN films: The effect of duty cycle10.1016/j.apsusc.2017.08.032 ↗
83. Industrially sputtered solar absorber surface10.1016/S0927-0248(98)00067-1 ↗
84. Microstructure of gas flow sputtered thermal barrier coatings: Influence of bias voltage10.1016/j.surfcoat.2017.09.067 ↗
85. Influence of bias voltage and oxygen flow rate on morphology and crystallographic properties of gas flow sputtered zirconia coatings10.1016/j.surfcoat.2015.06.002 ↗
86. Industrial-scale sputter deposition of Cr1−xAlxN coatings with 0.21 ≤ x ≤ 0.74 from segmented targets10.1016/j.surfcoat.2013.05.022 ↗
87. (Cr1−xAlx)N: A comparison of direct current, middle frequency pulsed and high power pulsed magnetron sputtering for injection molding components10.1016/j.tsf.2012.08.056 ↗
88. A review comparing cathodic arcs and high power impulse magnetron sputtering (HiPIMS)10.1016/j.surfcoat.2014.08.043 ↗
89. High power impulse magnetron sputtering discharge10.1116/1.3691832 ↗
90. Recent advances in modulated pulsed power magnetron sputtering for surface engineering10.1007/s11837-011-0092-4 ↗
91. Properties of TiSiN coatings deposited by hybrid HiPIMS and pulsed-DC magnetron co-sputtering10.1016/j.vacuum.2014.06.023 ↗
92. Enhanced ionization sputtering: A concept for superior industrial coatings10.1016/j.surfcoat.2013.11.040 ↗
93. Effect of microstructure on mechanical and tribological properties of TiAlSiN nanocomposite coatings deposited by modulated pulsed power magnetron sputtering10.1016/j.tsf.2015.11.047 ↗
94. Reduced atomic shadowing in HiPIMS: Role of the thermalized metal ions10.1016/j.apsusc.2017.10.133 ↗
95. A comparative study of thick TiSiCN nanocomposite coatings deposited by dcMS and HiPIMS with and without PEMS assistance10.1016/j.surfcoat.2018.01.082 ↗
96. Hashmi, S. (2014). High Power Impulse Magnetron Sputtering–HIPIMS. Comprehensive Materials Processing, Elsevier. [1st ed.].
97. The improvement of high power impulse magnetron sputtering performance by an external unbalanced magnetic field10.1016/j.vacuum.2016.08.020 ↗
98. Synergistic enhancement effect between external electric and magnetic fields during high power impulse magnetron sputtering discharge10.1016/j.vacuum.2017.06.007 ↗
99. Deposition rate enhancement in HiPIMS through the control of magnetic field and pulse configuration10.1016/j.surfcoat.2018.01.065 ↗
100. External magnetic field increases both plasma generation and deposition rate in HiPIMS10.1016/j.surfcoat.2018.02.076 ↗