Improved Hybrid Precoding Technique with Low-Resolution for MIMO-OFDM System

This paper proposes an improved hybrid beamforming system based on multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) system. The proposed beamforming system improves energy efficiency compared to the conventional hybrid beamforming system. Both sub-connected and full-connected structure are considered to apply the proposed algorithm. In the conventional hybrid beamforming, the usage of radio frequency (RF) chains and phase shifter (PS) gives high power and hardware complexity. In this paper, the phase over sampling (POS) with switches (SW) is used in hybrid beamforming system to improve the energy efficiency. The POS-SW structure samples the value of analog beamformer to make lower resolution than conventional system. The number of output data in POS is decided by the resolution of POS system. The limited number of POS decides the resolution of antenna array and the values of POSs are designed from maximum and minimum phase angle antenna array. Energy efficiency without the phase shifter is high although channel capacity is nearly similar with conventional system. Also, the amplifier with POS-SW system is proposed to improve the BER performance. According to the data bits, the output signals of POS are decided. The system with 2, 3 and 4 bits is simulated to prove the proposed algorithm. In order to overcome the loss of low-resolution system, the amplifier with POS-SW system using channel information is proposed. The average sum-rate of 4 bits system shows the similar performance with the conventional hybrid beamforming system. This structure can play an important role by increasing the energy efficiency of the wireless communication system that many antennas are used. It is shown that the BER, average sum rate and energy efficiency of the proposed scheme are more improved than the conventional hybrid beamforming system.