Adsorptive desulfurization of commercial diesel S500 using TiNi/AlMCM-41 and TiMo/AlMCM-41 nanoporous materials
Source abstract
Abstract
Abstract Mesoporous adsorbents of the AlMCM-41 type impregnated with Ti-Ni and Ti-Mo bimetallic compounds were prepared, characterized and evaluated for the adsorptive desulfurization process of diesel. The AlMCM-41 materials were synthesized using the hydrothermal process, varying the times of 24, 48, and 72 h, using cetyltrimethylammonium as a template. The calcined materials were impregnated with titanium, nickel, and molybdenum metals, with combinations of 15% by weight of active phase: 5.0% Ti and 10% Mo (TiMo) and 5.0% Ti and 10% Ni (TiNi). The materials were designated as TiMo/AlMCM-41 and TiNi/AlMCM-41. The obtained materials were tested as adsorbents for sulfur removal from a commercial S500 diesel sample, using a fixed-bed reactor containing a feeding system, a column packed with the adsorbent material and sample collectors, at room temperature under atmospheric pressure. It was verified that the sample containing TiNi/AlMCM-41 was the most efficient adsorbent, with capacity for removal of sulfur of 90%, for the sample containing the support synthesized at 48 h. The high activity of TiNi/AlMCM-41 material was attributed to the π-complexation of the thiophene aromatic compounds and the synergism effect of the Ti-Ni bimetallic impregnated on the inner surface of the AlMCM-41 pores, allowing selective adsorption.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Catalysis and Hydrodesulfurization Studies · Mesoporous Materials and Catalysis · Industrial Gas Emission Control
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. R. Dehghan, M. Anbia, Zeolites for adsorptive desulfurization from fuels: a review. Fuel Process. Technol. 167, 99–116 (2017)10.1016/j.fuproc.2017.06.015 ↗
2. H. Kim, K.J. Ko, M. Mofarahi, K.M. Kim, C.H. Lee, Adsorption behavior and mechanism of ultra-low concentration sulfur compounds in natural gas on Cu impregnated activated carbon. Chem. Eng. J. 470, 144274 (2023)10.1016/j.cej.2023.144274 ↗
3. J. Xiong, J.Y. Li, C. Chen, W. Jiang, W.S. Zhu, H.M. Li, J. Di, Universal strategy engineering grain boundaries for catalytic oxidative desulfurization. Appl. Catal. B Environ. 317, 121714 (2022)10.1016/j.apcatb.2022.121714 ↗
4. S. Qiu, J.H. Du, Y.H. Xiao, Q.D. Zhao, G.H. He, Hierarchical porous HKUST-1 fabricated by microwave-assisted synthesis with CTAB for enhanced adsorptive removal of benzothiophene from fuel. Sep. Purif. Technol. 271, 118868 (2021)10.1016/j.seppur.2021.118868 ↗
5. S.A. Ganiyu, K. Alhooshani, K.O. Sulaiman, M. Qamaruddin, I.A. Bakare, A. Tanimu, T.A. Saleh, Influence of aluminum impregnation on activated carbon for enhanced desulfurization of DBT at ambient temperature: role of surface acidity and textural properties. Chem. Eng. J. 303, 489–500 (2016)10.1016/j.cej.2016.06.005 ↗
6. W.Q. Fu, L. Zhang, T.D. Tang, Q.P. Ke, S. Wang, J.B. Hu, G.Y. Fang, J.X. Li, F.S. Xiao, Extraordinarily high activity in the hydrodesulfurization of 4,6-dimethyldibenzothiophene over Pd supported on mesoporous zeolite Y. J. Am. Chem. Soc. 133, 15346–15349 (2011)10.1021/ja2072719 ↗
7. X.Y. Zhou, T.Y. Wang, L. Zhang, S.Y. Che, H. Liu, S.X. Liu, C.Y. Wang, D.W. Su, Z.Y. Teng, Highly efficient Ag2O/Na-g-C3N4 heterojunction for photocatalytic desulfurization of thiophene in fuel under ambient air conditions. Appl. Catal. B Environ. 316, 121614 (2022)10.1016/j.apcatb.2022.121614 ↗
8. L. Li, J. Sun, H. Ling, F. Ju, Reactive adsorption desulfurization of FCC gasoline over self-sulfidation adsorbent. Sep. Purif. Technol. 318, 123989 (2023)10.1016/j.seppur.2023.123989 ↗
9. Y.X. Li, M.M. Jin, S. Shi, S.C. Qi, X.Q. Liu, L.B. Sun, Adjusting accommodation microenvironment for Cu+ to enhance oxidation inhibition for thiophene capture. AIChE J. 67(10), e17368 (2021)10.1002/aic.17368 ↗
10. Y.X. Li, J.X. Shen, S.S. Peng, J.K. Zhang, J. Wu, X.Q. Liu, L.B. Sun, Enhancing oxidation resistance of Cu(I) by tailoring microenvironment in zeolites for efficient adsorptive desulfurization. Nat. Commun. 11(1), 3206 (2020)10.1038/s41467-020-17042-6 ↗
11. W.L. Li, Q.F. Liu, J.M. Xing, H.S. Gao, X.C. Xiong, Y.G. Li, X. Li, H.Z. Liu, High efficiency desulfurization by adsorption with mesoporous aluminosilicates. AIChE J. 53(12), 3263–3268 (2007)10.1002/aic.11319 ↗
12. P. Lu, M.L. Yin, J. Chen, Q.L. Wang, C.S. Ye, T. Qiu, ZIF-8-derived P, N-Co-doped hierarchical carbon: synergistic and high-efficiency desulfurization adsorbents. Chem. Eng. J. 429, 132458 (2022)10.1016/j.cej.2021.132458 ↗
13. Y.H. Xiao, J.H. Fu, H.Y. Zhu, Q.D. Zhao, L. Zhou L, Facile and controllable preparation of nanocrystalline ZSM-5 and Ag/ZSM-5 zeolite with enhanced performance of adsorptive desulfurization from fuel. Sep. Purif. Technol. 288, 120698 (2022)10.1016/j.seppur.2022.120698 ↗
14. B. Saha, S. Vedachalam, A.K. Dalai, Review on recent advances in adsorptive desulfurization. Fuel Process. Technol. 214, 106685 (2021)10.1016/j.fuproc.2020.106685 ↗
15. A.L. Santos, R.A. Reis, V. Rossa, M.M. Reis, A.L.H. Costa, C.O. Veloso, C.A. Henriques, F.M. Zotin, M.L.L. Paredes, E.B. Silveira, S.S.X. Chiaro, Silica-alumina impregnated with cerium, nickel, and molybdenum oxides for adsorption of sulfur and nitrogen compounds from diesel. Mater. Lett. 83, 158–160 (2012)10.1016/j.matlet.2012.06.011 ↗
16. S. Rashidi, N.M.R. Khosravi, B. Anvaripour, Adsorptive desulfurization and denitrogenation of model fuel using HPW and NiO-HPW modified aluminosilicate mesostructures. Microp. Mesop. Mater. 211, 134–141 (2015)10.1016/j.micromeso.2015.02.041 ↗
17. J.C. Zou, Y. Lin, S.H. Wu, Y.Y. Zhong, C.P. Yang, Molybdenum dioxide nanoparticles anchored on nitrogen-doped carbon nanotubes as oxidative desulfurization catalysts: role of electron transfer in activity and reusability. Adv. Funct. Mater. 31(22), 2100442 (2021)10.1002/adfm.202100442 ↗
18. T.A. Saleh, G.I. Danmaliki, Influence of acidic and basic treatments of activated carbon derived from waste rubber tires on adsorptive desulfurization of thiophenes. J. Taiwan Inst. Chem. Eng. 60, 460–468 (2016)10.1016/j.jtice.2015.11.008 ↗
19. X. Ke, P. Lu, J. Cai, J. Wang, C. Ye, C. Yang, T. Qiu, High-efficiency adsorption of aromatic sulfur-containing species by ZnCl2-chitosan polymer derived Zn, N-cooperated highly porous carbon. Chem. Eng. Sci. 275, 118730 (2023)10.1016/j.ces.2023.118730 ↗
20. M. Anbia, S. Karami, Desulfurization of gasoline using novel mesoporous carbon adsorbents. J. Nanostructure Chem. 5, 131–137 (2015)10.1007/s40097-014-0144-8 ↗
21. Y.P. Guo, W. Xie, H. Li, J.P. Li, J. Hu, H.L. Liu, Construction of hydrophobic channels on Cu(I)-MOF surface to improve selective adsorption desulfurization performance in presence of water. Sep. Purif. Technol. 285, 120287 (2022)10.1016/j.seppur.2021.120287 ↗
22. C.Y. Zhang, X.W. Zhang, Z.P. Tao, B.Z. Li, D.F. Zhao, H.Y. Gao, Z.P.G. Zhu, X.T. Wang, Defect engineering and post-synthetic reduction of Cu based metalorganic frameworks towards efficient adsorption desulfurization. Chem. Eng. J. 455, 140487 (2023)10.1016/j.cej.2022.140487 ↗
23. W. Tao, B. Zhang, L. Yin, X. Teng, Z. Wen, Z. Zhang, W. Ning, Enhanced performance of adsorptive removal of thiophenic compounds from model fuels and aromatics over Ag and Ce doped SiO2 aerogel composites. Chem. Eng. Res. Des. 191, 156–171 (2023)10.1016/j.cherd.2023.01.007 ↗
24. M. Teymouri, A. Samadi-Maybodi, A. Vahid, A. Miranbeigi, Adsorptive desulfurization of low sulfur diesel fuel using palladium containing mesoporous silica synthesized via a novel in-situ approach. Fuel Process. Technol. 116, 257–264 (2013)10.1016/j.fuproc.2013.07.009 ↗
25. Y. Xiao, J. Fu, H. Zhu, Q. Zhao, L. Zhou, Facile and controllable preparation of nanocrystalline ZSM-5 and Ag/ZSM-5 zeolite with enhanced performance of adsorptive desulfurization from fuel. Sep. Purif. Technol. 288, 120698 (2022)10.1016/j.seppur.2022.120698 ↗
26. Y.H. Cha, K.B. Lee, Examining the impact of different anions in Cu precursors on sulfur adsorption through zeolites with Cu ion-exchange. Chem. Eng. J. 468, 143461 (2023)10.1016/j.cej.2023.143461 ↗
27. J. Liao, W. Bao, Y. Chen, Y. Zhang, L. Chang, The adsorptive removal of thiophene from benzene over ZSM-5 zeolite. Energy Sources, Part A Recover. Util. Environ. Eff. 34, 618–625 (2012)
28. H.Y. Sun, L.P. Sun, F. Li, L. Zhang, Adsorption of benzothiophene from fuels on modified NaY zeolites. Fuel Process. Technol. 134, 284–289 (2015)10.1016/j.fuproc.2015.02.010 ↗
29. M. Umar, I. Abdulazeez, A. Tanimu, S.A. Ganiyu, K. Alhooshani, Modification of ZSM-5 mesoporosity and application a catalyst support in Hydrodesulfurization of Dibenzothiophene: Experimental and DFT Studies. J. Environ. Chem. Eng. 9, 106738 (2021)10.1016/j.jece.2021.106738 ↗
30. P.L. Llewellyn, Y. Grillet, F. Schuth, H. Reichert, K.K. Unger, Effect of pore size on adsorbate condensation and hysteresis within a potential model adsorbent: M41S. Microporous Materials 3, 345–349 (1994)10.1016/0927-6513(94)00042-5 ↗
31. J.C. Morales-Ortuno, R.A. Ortega-Domínguez, P. Hernandez-Hipolito, X. Bokhimi, T.E. Klimova, HDS performance of NiMo catalysts supported on nanostructured materials containing titania. Catal. Today 271, 127–139 (2016)10.1016/j.cattod.2015.07.028 ↗
32. A.C.F. Coriolano, A.A.A. Oliveira, R.A.F. Bandeira, V.J. Fernandes Jr., As.S. Araujo, Kinetic study of thermal and catalytic pyrolysis of Brazilian heavy crude oil over mesoporous Al-MCM-41 materials. J. Therm. Anal. Calorim. 119, 2151–2157 (2015)10.1007/s10973-015-4408-4 ↗
33. A.S. Araujo, J.M.F.B. Aquino, M.J.B. Souza, A.O.S. Silva, Synthesis, characterization and catalytic application of cerium-modified MCM-41. J. Solid State Chem. 171(1–2), 371–374 (2003)10.1016/S0022-4596(02)00215-3 ↗
34. V. Antochshuk, A.S. Araujo, M. Jaroniec, Functionalized MCM-41 and CeMCM-41 materials synthesized via interfacial reactions. J. Phys. Chem. B 104, 9713–9719 (2000)10.1021/jp0021648 ↗
35. M.J.B. Souza, A.S. Araujo, A.M.G. Pedrosa, B.A. Marinkovic, P.M. Jardim, E. Morgado Jr., Textural features of highly ordered Al-MCM-41 molecular sieve studied by X-ray diffraction, nitrogen adsorption and transmission electron microscopy. Mater. Lett. 60(21–22), 2682–2685 (2006)10.1016/j.matlet.2006.01.066 ↗
36. L.Q. La-Salvia, A.S.P. Lovon, G.P. Valenca, Influence of aluminum addition in the framework of MCM-41 mesoporous molecular sieve synthesized by non-hydrothermal method. Mater. Res. 20(6), 1461–1469 (2017)10.1590/1980-5373-mr-2016-1064 ↗
37. Q. Yu, L. Zhang, R. Guo, J. Sun, W. Fu, T. Tang, Catalytic performance of Como catalysts supported on mesoporous ZSM-5 zeolite-alumina composites in the hydrodesulfurization of 4,6-dimethyldibenzothiophene. Fuel Process. Technol. 159, 76–87 (2017)10.1016/j.fuproc.2017.01.023 ↗
38. L. Qi, P. Zheng, Z. Zhao, A. Duan, C. Xu, X. Wang, Insights into the intrinsic kinetics for efficient hydrodesulfurization of 4,6-dimethyldibenzo thiophene over mesoporous CoMo/ZSM-5. J. Catal. 408, 279–293 (2022)10.1016/j.jcat.2022.03.010 ↗
39. W. Zhou, A. Zhou, Y. Zhang, C. Zhang, Z. Chen, L. Liu, Y. Zhou, Q. Wei, X. Tao, Hydrodesulfurization of 4,6-dimethyldibenzo thiophene over NiMo supported on Ga-modified Y zeolites catalysts. J. Catal. 374, 345–359 (2019)10.1016/j.jcat.2019.05.013 ↗
40. H. Song, J. Wang, Z. Wang, H. Song, F. Li, Z. Jin, Effect of titanium content on dibenzothiophene HDS performance over Ni2P/Ti-MCM-41 catalyst. J. Catal. 311, 257–265 (2014)10.1016/j.jcat.2013.11.021 ↗