journal article·2020Open access

Prediction Model of Abutment Pressure Affected by Far-field Hard Stratum Based on Elastic Foundation Theory

Zhimin Zhang, Tianhe Kang

Computers, Materials & Continua· Volume 66· Issue 1

Abstract

In view of the three-dimensional dynamic abutment pressure, the influence of the far-field hard stratum (FHS) in deep, thick coal seams is indeterminant. Based on elastic foundation theory, a three-dimensional dynamic prediction model of the abutment pressure was established. Using this model, the dynamic change in the coal seam abutment pressure caused by the movement of the FHS was studied, and a method for determining the dynamic change range of the abutment pressure was developed. The results of the new prediction model of the abutment pressure are slightly higher than the measured values, with an error of 0.51%, which avoids the shortcomings of the results because the Winkler foundation model results are lower than the measured values and have an error of 9.98%. As time progresses, the abutment pressure and its distribution range are affected by the FHS movement, which has the characteristics of gradually increasing dynamic change until the FHS fractures. The peak value of the abutment pressure increases linearly with time, and the influence range increases with time following a power function with an exponent of less than 1. The influence range of the FHS movement on the abutment pressure ahead of the working face, behind the working face, and along the working face is 10 times, 25 times, and 17 times the mining thickness, respectively. According to the actual geological parameters, the dynamic change range of the coal seam abutment pressure was determined by drawing an additional stress curve and by determining the threshold value. These research results are of great significance to the partition optimization of the roadway support design of deep, thick coal seams.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Rock Mechanics and Modeling · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Stress distribution and surrounding rock control of mining near to the overlying coal pillar in the working face10.1016/j.ijmst.2018.07.003 ↗
2. Fast CU size decision and mode decision algorithm for intra prediction in HEVC10.1007/s11042-015-3155-7 ↗
3. Compressed sensing image reconstruction using intra prediction10.1016/j.neucom.2014.05.088 ↗
4. PPP: Prefix-based popularity prediction for efficient content caching in content-centric networks10.32604/csse.2018.33.259 ↗
5. UPTP vehicle trajectory prediction based on user preference under complexity environment10.1007/s11277-017-4743-9 ↗
6. Research on the required width of a fault waterproof coal pillar based on underground pressure control theory10.1007/s12517-019-4637-0 ↗
7. Distribution law of principal stress difference of deep surrounding rock of gob-side entry and optimum design of coal pillar width
8. Field and simulation study of the rational coal pillar width in extra-thick coal seams10.1002/ese3.538 ↗
9. Assessment of mining induced stress development over coal pillars during depillaring10.1016/j.ijrmms.2011.04.004 ↗
10. Temporal and spatial evolution characteristics of lateral coal stress in fully mechanized top coal caving mining working face in ultra-thick coal seam
11. Determination of abutment pressure in coal mines with extremely thick alluvium stratum: A typical kind of rockburst mines in China10.1007/s00603-015-0868-x ↗
12. A study on dual-load-zone model of overlying strata and evolution law of mining stress10.32604/cmc.2019.04456 ↗
13. Method to calculate working surface abutment pressure based on key strata theory10.1155/2019/7678327 ↗
14. Composite key stratum module of Winkler foundation and its mechanical properties
15. Longitudinal deflection of existing shield tunnels due to deep excavation
16. Study of dynamic and static abutment pressure around longwall face and its application
17. Developing conductive concrete containing wire rope and steel powder wastes for route deicing10.1016/j.conbuildmat.2019.117184 ↗
18. Computational predictions for estimating the maximum deflection of reinforced concrete panels subjected to the blast load10.1016/j.ijimpeng.2020.103527 ↗
19. Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations10.1016/j.mechmat.2013.07.021 ↗
20. Artificial neural network methods for the solution of second order boundary value problems10.32604/cmc.2019.06641 ↗
21. Optimization of fiber distribution in fiber reinforced composite by using NURBS functions10.1016/j.commatsci.2013.11.032 ↗
22. Prediction of air quality in Tehran by developing the nonlinear ensemble model10.1016/j.jclepro.2020.120825 ↗
23. Size- and edge-effect cohesive energy and shear strength between graphene, carbon nanotubes and nanofibers: Continuum modeling and molecular dynamics simulations10.1016/j.compstruct.2018.10.021 ↗
24. The interface strength and delamination of fiber-reinforced composites using a continuum modeling approach10.1016/j.compositesb.2017.11.007 ↗
25. Evaluation of a developed bypass viscous damper performance10.1007/s11709-020-0627-2 ↗
26. Performance of a novel bent-up bars system not interacting with concrete10.1007/s11709-019-0552-4 ↗
27. Study of effects of hard thick roof on gas migration and field experiment of roof artificially guided pre-splitting for efficient gas control10.1007/s11053-019-09531-3 ↗
28. Apparent-depth effects of the dynamic failure of thick hard rock strata on the underlying coal mass during underground mining10.1007/s00603-018-1662-3 ↗
29. Xu · Elasticity · 2016 · 13 · 1
30. A discontinuum modelling approach for investigation of Longwall Top Coal Caving mechanisms10.1016/j.ijrmms.2018.04.025 ↗
31. Prediction of top coal cavability character of a deep coal mine by empirical and numerical methods10.1134/S1062739118054903 ↗
32. Systematic principles of surrounding rock control in longwall mining within thick coal seams10.1016/j.ijmst.2018.11.014 ↗
33. Effect of upward angle on the drawing mechanism in longwall top-coal caving mining10.1016/j.ijrmms.2016.03.004 ↗
34. Fracture analysis of double-layer hard and thick roof and the controlling effect on strata behavior: A case study10.1016/j.engfailanal.2017.07.029 ↗
35. On the hydraulic fracturing in naturally-layered porous media using the phase field method10.1016/j.enggeo.2019.105306 ↗
36. Phase-field modeling of fluid-driven dynamic cracking in porous media10.1016/j.cma.2019.03.001 ↗
37. Experimental study on characteristics of broken caving and regularity of compaction deformation of rocks in caving zone in the weakly cemented strata
38. Experiment study of compaction characteristics of crushed stones from coal seam roof
39. Bearing deformation characteristics of large-size broken rock
40. Dynamic distribution characteristics and determination method of caving zone in overburden strata with large mining height
41. Analytical prediction for tunnel-soil-pile interaction mechanics based on Kerr foundation model10.1007/s12205-019-0791-x ↗
42. Analytical solution for the response of an existing tunnel to a new tunnel excavation underneath10.1016/j.compgeo.2018.12.026 ↗
43. Stability control of underground roadways subjected to stresses caused by extraction of a 10-m-thick coal seam: A case study10.1007/s00603-017-1217-z ↗
44. Response and control technology for entry loaded by mining abutment stress of a thick hard roof10.1016/j.ijrmms.2016.10.001 ↗
45. Field and numerical investigations of gateroad system failure induced by hard roofs in a longwall top coal caving face10.1016/j.coal.2017.02.015 ↗