First Principles Calculations for Corrosion in Mg-Li-Al Alloys with Focus on Corrosion Resistance: A Comprehensive Review

1. The use of aluminum and magnesium alloys in automotive lightweight technologies10.1007/s12206-023-0712-2 ↗

2. High-strength extruded magnesium alloys: A critical review10.1016/j.jmst.2024.01.089 ↗

3. Metallic lightweight materials: Properties and their applications10.1016/B978-0-323-95189-0.00003-2 ↗

4. Applications of magnesium alloys for aerospace: A review10.1016/j.jma.2023.09.015 ↗

5. Research advances in magnesium and magnesium alloys worldwide in 202010.1016/j.jma.2021.04.001 ↗

6. Promising methods for corrosion protection of magnesium alloys in the case of Mg-Al, Mg-Mn-Ce and Mg-Zn-Zr: A recent progress review10.3390/met11071133 ↗

7. Characteristics of the microstructure and properties of Mg-Li magnesium alloy after deformation by the Kobo method

8. Recent research advances on corrosion mechanism and protection, and novel coating materials of magnesium alloys: A review10.1039/D2RA07829E ↗

9. Effect of grain refinement on superplastic forming of magnesium alloy AZ31 under three different conditions using rectangular die

10. Efficient protection of Mg alloy enabled by combination of a conventional anti-corrosion coating and a superamphiphobic coating10.1016/j.cej.2020.124562 ↗

11. Corrosion behavior of severely plastically deformed Mg and Mg alloys10.1016/j.jma.2022.09.007 ↗

12. Microstructural control and mechanical properties of a high Li-containing Al-Mg-Li alloy10.1016/j.matchar.2021.110895 ↗

13. Recent progress in materials used towards corrosion protection of Mg and its alloys10.29252/jcc.2.4.5 ↗

14. Enhancing corrosion resistance of ZK60 magnesium alloys via Ca microalloying: The impact of nanoscale precipitates10.1016/j.jma.2022.06.011 ↗

15. Influence of media pH on corrosion behavior of AZ31 magnesium alloy in chloride and sulfate media10.3103/S1068375521060065 ↗

16. Influence of pH value on the microstructure and corrosion behavior of carbon fiber reinforced magnesium matrix composites10.1016/j.jmrt.2022.01.031 ↗

17. Experimental investigation and thermodynamic calculation of the Al–Mg–Zn system10.1016/S0040-6031(97)00458-9 ↗

18. Corrosion mechanisms of nickel-based alloys in chloride-containing hydrofluoric acid solution10.1016/j.engfailanal.2022.106580 ↗

19. The deterioration effects of corrosion product deposition on Ni-Cu alloy in hydrofluoric acid vapor phase10.1016/j.corsci.2023.111256 ↗

20. Galvanic corrosion behavior between AZ91D magnesium alloy and copper in distilled water10.1016/j.corsci.2021.109562 ↗

21. Assessment of galvanostatic anodic polarization to accelerate the corrosion of the bioresorbable magnesium alloy WE4310.3390/app11052128 ↗

22. P. King, “Investigating the role of water quality on the galvanic corrosion of lead in hard drinking water with a focus on NOM”, University of Waterloo, Waterloo, ON, Canada, 2020. Accessed: Jun. 05, 2024. [Online]. Available at: http://hdl.handle.net/10012/15913

23. Anodic hydrogen evolution on Mg10.1016/j.jma.2021.09.002 ↗

24. Synergistic effect of ionic liquid (Il) cation and anion inhibits negative difference effect on mg in water-Il mixtures

25. First principles study of the elastic properties of magnesium and iron-based bio-resorbable alloys10.1016/j.mseb.2017.12.024 ↗

26. First principles modeling of water dissociation on Mg (0001) and development of a Mg surface Pourbaix diagram10.5006/1322 ↗

27. Modeling reaction pathways for hydrogen evolution and water dissociation on magnesium10.1016/j.electacta.2016.04.128 ↗

28. First principles modeling of cathodic reaction thermodynamics in dilute magnesium alloys10.5006/2274 ↗

29. Aqueous electrochemical activity of the Mg surface: The role of group 14 and 15 microalloying elements10.1149/2.0071714jes ↗

30. A first principles investigation of corrosion chemistry of common elemental impurities in Mg-Al alloys10.5006/2392 ↗

31. Mechanistic insight into Al-Zn, Mg, and Al-Mg-rich primer design for enhanced cathodic prevention on sensitized Al-Mg alloys10.5006/4289 ↗

32. Microstructure and mechanical properties of magnesium-lithium alloy prepared by friction stir processing10.1007/s12598-019-01217-2 ↗

33. Development of ultralight binary Mg-Li alloys: Enhancing damping, ductility, and ultimate compressive strength beyond 2000 MPa10.1007/s11665-022-07335-w ↗

34. Achieving synergistic strength-ductility-corrosion optimization in Mg-Li-Al-Zn alloy via cross-pass friction stir processing10.1016/j.jallcom.2023.170581 ↗

35. Wu · ACS Biomater. Sci. Eng. · 2020 · 6 · 195010.1021/acsbiomaterials.9b01591 ↗

36. Mechanical behavior of Mg-Li-Al alloys

37. Hydrogen storage properties and reaction mechanism of the Mg-Li-Na-Al ternary hydride system

38. Simultaneously improved mechanical strength and corrosion resistance of Mg-Li-Al alloy by solid solution treatment10.1016/j.matlet.2021.130305 ↗

39. Effects of alloying elements on the microstructure and corrosion behavior of Mg–Li–Al–Y alloys10.1016/j.jallcom.2020.154344 ↗

40. Thermodynamic and surface properties of Al-Li–Mg liquid alloy10.1016/j.physb.2020.412461 ↗

41. Effect of microstructure evolution on corrosion of different crystal surfaces of AZ31 Mg alloy in a chloride-containing solution10.1016/j.corsci.2011.09.005 ↗

42. Progress toward understanding the stress corrosion problem10.5006/1.3583022 ↗

43. Crystallographic orientation and electrochemical activity of AZ31 Mg alloy10.1016/j.elecom.2010.05.011 ↗

44. Calculation of the surface energy of hcp-metals with the empirical electron theory10.1016/j.apsusc.2009.07.034 ↗

45. Influence of texture on corrosion rate of AZ31 Mg alloy in 3.5 wt.% NaCl10.1016/j.matdes.2011.04.031 ↗

46. Enhanced in-vitro degradation resistance and cytocompatibility of a thermomechanically processed novel Mg alloy: Insights into the role of microstructural attributes10.1016/j.jma.2024.01.022 ↗

47. Exploring the potential of Mg-Zn-Mn-Ca/ZnO composites as a biodegradable alternative for fracture fixation: Microstructural, mechanical, and in-vitro biocompatibility analysis10.1016/j.compstruct.2023.117431 ↗

48. Influence of texture on the corrosion behavior of an as-extruded Mg–8Al-0.5In alloy sheet10.1016/j.jmrt.2023.10.014 ↗

49. Grain size effect on the mechanical properties of nanocrystalline magnesium aluminate spinel

50. The effect of precipitate size on the yield strength-pitting corrosion correlation in Al–Cu–Mg alloys10.1016/j.actamat.2010.07.010 ↗

51. Thakur · J. Mater. Res. Technol. · 2023 · 26 · 26710.1016/j.jmrt.2023.07.121 ↗

52. Achieving high mechanical properties and corrosion resistance of Al-Zn-Mg matrix composites via regulating intragranular reinforcements10.1016/j.jmst.2022.12.066 ↗

53. The effects of severe plastic deformation on the mechanical and corrosion characteristics of a bioresorbable Mg-ZKQX6000 alloy10.1016/j.msec.2020.111130 ↗

54. Understanding grain refinement of Sc addition in a Zr containing Al-Zn-Mg-Cu aluminum alloy from experiments and first-principles10.1016/j.intermet.2020.106823 ↗

55. S. Tang, “Correlation between microstructure and properties of magnesium-lithium-aluminum alloys,” School of Materials Science & Engineering, UNSW Sydney, Australia, 2020. Accessed: Jun. 05, 2024. [Online]. Available: https://unsworks.unsw.edu.au/entities/publication/3990d8c4-6cc4-4e28-a338-326760e3edbc/full

56. T. Xin, “Phase transformations and mechanical properties of BCC Mg-Li-Al alloys,” School of Materials Science & Engineering, UNSW Sydney, Australia, 2021. Accessed: Jun. 05, 2024. [Online]. Available: https://unsworks.unsw.edu.au/entities/publication/e1446fb4-35c0-4872-b33f-d17219eb0fee/full

57. The development of β phase Mg-Li alloys for ultralight corrosion resistant applications

58. Simultaneous improvement of strength, ductility and damping capacity of single β-phase Mg–Li–Al–Zn alloys

59. Influence of Ca and Zn synergistic alloying on the microstructure, tensile properties and strain hardening of Mg-1Gd alloy10.1016/j.msea.2020.139344 ↗

60. The scandium effect in multicomponent alloys10.1080/09506608.2015.1137692 ↗

61. Effects of alloying elements on the corrosion behavior and biocompatibility of biodegradable magnesium alloys: A review10.1039/C3TB21746A ↗

62. Study on the strengthening mechanism of rare earth yttrium on magnesium alloys10.1016/j.msea.2022.143513 ↗

63. Significance of alloying elements on the mechanical characteristics of Mg-based materials for biomedical applications10.3390/cryst12081138 ↗

64. Development of ultra-light magnesium-lithium alloys10.1007/BF02757554 ↗

65. The significant effect of trace yttrium level on the mechanical properties of cast Mg-6Al alloy through a refinement mechanism10.1016/j.msea.2020.138966 ↗

66. Li · J. Magnes. Alloys · 2021 · 9 · 155610.1016/j.jma.2021.01.008 ↗

67. Hao · Mater. Sci. Eng. A · 2017 · 698 · 2710.1016/j.msea.2017.04.114 ↗

68. M. Gu, G. Wei, W. Liu, and G. Wu, “Influence of neodymium on microstructure and corrosion behavior of Mg-8Li-3Al-2Zn alloy,” vol. 68, pp. 436–443, 2017. doi: 10.1002/maco.201609141.10.1002/maco.201609141 ↗

69. Cerium in aluminum alloys

70. Effect of lanthanum addition on grain refinement and mechanical properties of Mg–9Li–3Al alloy10.1007/s12540-020-00776-9 ↗

71. CALPHAD-guided design of Mg-Y-Al alloy with improved strength and ductility via regulating the LPSO phase10.1016/j.actamat.2023.119521 ↗

72. Improving the mechanical properties of duplex Mg-Li-Zn alloy by mixed rolling processing

73. Effects of solution temperature and Nd addition on microstructure and mechanical properties of Mg-12Gd-2Zn-x Nd-0.4 Zr alloys10.1007/s11665-023-08628-4 ↗

74. Relation between Zn additions, microstructure and corrosion behavior of new wrought Mg-5Al alloys10.1007/s12540-019-00529-3 ↗

75. Effect of Ca addition on the microstructure and mechanical properties of heat-treated Mg-6.0 Zn-1.2 Y-0.7 Zr alloy10.1016/j.jma.2021.01.010 ↗

76. Tailoring the microstructure and enhancing the corrosion resistance of extruded dilute Mg-0.6 Al-0.5 Mn-0.25 Ca alloy by adding trace Ce10.1016/j.corsci.2022.110605 ↗

77. Achieving high strength-ductility synergy in dilute Mg-Al-Ca alloy by trace Ce addition10.1016/j.jallcom.2022.165407 ↗

78. Effect of Cu addition and heat treatment on the microstructure and microwear of selective laser melted Mg–Al–Zn alloy10.1007/s00339-020-03917-4 ↗

79. Microstructural characteristics and mechanical performances of Al–Si–Cu–Mg-(Ge) alloys prepared under 5GPa-level pressure10.1016/j.msea.2023.145118 ↗

80. The effect of Sn addition on Zn-Al-Mg alloy: Part I: Microstructure and phase composition10.3390/ma14185404 ↗

81. Experimental investigation and thermodynamic modelling of the Mg-Al-rich region of the Mg–Al–Sr10.1515/ijmr-2006-0070 ↗

82. Effect of strontium on microstructure, mechanical, and biological responses of Mg–Al–Zn–Sr alloys10.1080/02670836.2022.2072071 ↗

83. Effect of boron addition on the microstructure, thermal, and mechanical properties of Al-5% Mg-2% Ti alloy10.1007/s13632-024-01046-5 ↗

84. Solubility of chromium in liquid magnesium10.1007/s11663-022-02494-6 ↗

85. Insight into chromium adsorption from contaminated soil using Mg/Al LDH-zeolite

86. Effect of Mn addition on melt purification and Fe tolerance in Mg alloys10.1007/s11837-020-04550-5 ↗

87. Microstructure and mechanical properties of extruded Mg-6Al-2X (X = Cu/Ni/Fe) alloy used degradable bridge plugs10.1007/s42114-023-00753-x ↗

88. Alloying elements of magnesium alloys: A literature review

89. Influence of crystallographic orientation and Al alloying on the corrosion behavior of extruded α-Mg/LPSO two-phase Mg-Zn-Y alloys with multimodal microstructure10.1016/j.corsci.2022.110237 ↗

90. Review of Mg alloy corrosion rates10.1016/j.jma.2020.08.002 ↗

91. Corrosion resistant and high-strength dual-phase Mg-Li-Al-Zn alloy by friction stir processing10.1038/s43246-022-00245-3 ↗

92. Influence of heat treatment on corrosion behavior of hot rolled Mg5Gd alloys10.1016/S1003-6326(21)65551-6 ↗

93. Effect of lithium content on the mechanical and corrosion behaviors of HCP binary Mg-Li alloys10.1016/j.jma.2020.02.022 ↗

94. Corrosion behavior of magnesium in aqueous sulfate-containing electrolytes10.1016/j.jma.2023.06.001 ↗

95. The corrosion behaviors of an as-rolled Mg-8Li (in wt.%) alloy in two differently concentrated NaCl solutions

96. Microstructure and corrosion resistance of a duplex structured Mg–7.5Li–3Al–1Zn10.1016/j.jma.2020.07.007 ↗

97. Microstructure and corrosion properties for ultrahigh-pressure Mg-Li alloys10.1016/j.corsci.2022.110519 ↗

98. Yan · Corros. Sci. · 2020, Art. no. 108342 · 16410.1016/j.corsci.2019.108342 ↗

99. Microstructural evolution and its influence on mechanical and corrosion behaviors in a high-Al/Zn containing duplex Mg-Li alloy after friction stir processing10.1016/j.jmst.2023.10.019 ↗

100. Effect of microalloyed Ca on the microstructure and corrosion behavior of extruded Mg alloy AZ3110.1016/j.jallcom.2020.153844 ↗