Analysis of Flow Structure in Microturbine Operating at Low Reynolds Number
Source abstract
Abstract
In this paper, three-dimensional flows in laminar subsonic cascades at relatively low Reynolds numbers (Re < 2500) are presented, based on numerical calculations. The stator and rotor blade designs are those for a MEMS-based Rankine microturbine power-plant-on-a-chip with 109-micron chord blades. Blade passage calculations in 3D were done for different Reynolds numbers, tip clearances (from 0 to 20%) and incidences (0° to 15°) to determine the impact of aerodynamic conditions on the flow patterns. These conditions are applied to a blade passage for a stationary outer casing. The 3D blade passage without tip clearance indicates the presence of two large symmetric vortices due to the interaction between hub/casing boundary layers and the blade. Opening the tip clearance introduces the tip vortex, which tends to become dominant above a tip clearance of 10%. In addition to providing a description and understanding of the 3D flow in a MEMS microturbine, these results suggest the importance of considering 3D flows in the design of microturbomachinery, even though the geometry is dominantly 2D.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Turbomachinery Performance and Optimization · Fluid Dynamics and Turbulent Flows · Heat Transfer Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Macro power from micro machinery10.1126/science.276.5316.1211 ↗
2. Design of a microfabricated rankine cycle steam turbine for power generation
3. High-speed microfabricated silicon turbomachinery and fluid film bearings10.1109/JMEMS.2004.839008 ↗
4. A review of some early design practice using computational fluid dynamics and a current perspective10.1115/1.1650379 ↗
5. A review of turbomachinery tip gap effects: Part 1: Cascades10.1016/0142-727X(82)90017-0 ↗
6. C. Lee, “Development of a microfabricated turbopump for a Rankine vapor power cycle,” Ph.D. dissertation. Columbia University, New York, NY, USA, 2006.
7. Computation of tip-leakage flow in a linear compressor cascade with a second-moment turbulence closure10.1016/j.ijheatfluidflow.2007.04.008 ↗
8. Computational investigation of the three-dimensional flow structure and losses in a low Reynolds number microturbine
9. A. Mehra, “Computational investigation and design of low Reynolds number micro-turbomachinery,” M.S. dissertation. Massachusetts Institute of Technology, Cambridge, MA, USA, 1997.
10. Aerothermodynamics of micro-turbomachinery
11. S. Kang, “Investigation on the three-dimensional flow within a compressor cascade with and without tip clearance,” Ph.D. dissertation. Department of Fluid Mechanics, Vrije Universiteit Brussels, Belgium, 1993.
12. A micro turbine for electric power generation10.1016/j.sna.2004.01.003 ↗
13. Control of secondary flow loss in turbine cascade by streamwise vortex10.1016/j.compfluid.2011.09.012 ↗
14. The use of colored smoke to visualize secondary flows in turbine-blade cascade10.1017/S0022112083003237 ↗
15. Recent progress in the understanding of basic aspects of secondary flows in turbine blade passages10.1115/1.3239704 ↗
16. Predictions of endwall losses and secondary flows in axial flow turbine cascades10.1115/1.3262089 ↗
17. Junction flows10.1146/annurev.fluid.33.1.415 ↗
18. Effects of simulated rotation on tip leakage in a planar cascade of turbine blades: Part I—Tip gap flow10.1115/1.2929189 ↗
19. Review—Secondary flows and losses in cascades and axial-flow turbomachines10.1016/0020-7403(63)90055-9 ↗
20. Development of a MEMS-based Rankine cycle steam turbine for power generation: Project status
21. Micro-heat engines, gas turbines, and rocket engines—the MIT microengine project
22. E. M. Greitzer, C. S. Tan and M. B. Graf, Internal flow: Concepts and applications.Cambridge, UK: University Press, 2007. [Online]. Available: https://www.book2look.com/vbook.aspx?id=9780521036726.
23. Counter-rotating streamwise vortex formation in the turbine cascade with end fence10.1016/S0045-7930(00)00026-8 ↗
24. CFD analysis of three-dimensional flows in a low Reynolds number microturbine
25. Design principles and measured performance of multistage radial flow microturbomachinery at low re numbers10.1115/1.2979010 ↗
26. Numerical analysis of sub-millimeter-scale microturbomachinery aerothermodynamics
27. Secondary flows in axial turbines—A review
28. Numerical analysis of turbulent buoyant flows in enclosures: Influence of grid and boundary conditions10.1016/j.ijthermalsci.2006.10.006 ↗
29. An objective definition of a vortex10.1017/S0022112004002526 ↗
30. Flow visualization in a linear turbine cascade of high-performance turbine blades10.1115/1.2841006 ↗
31. The development of Poiseuille flow10.1017/S0022112069002606 ↗