Modeling and Simulation of DVR and D-STATCOM in Presence of Wind Energy System
Source abstract
Abstract
The present study suggests that series voltage injection is more effective than parallel current injection to improve voltage quality on the load side. The line voltage can be accurately symmetrized at the connection point by creating and controlling a series voltage component in each phase. This is more reliable and effective than parallel current injection. A dynamic voltage restorer (DVR) and a distribution static synchronous compensator (DSTATCOM) were utilized to provide the required power. The DVR is an effective and modern device utilized in parallel within the grid and can protect sensitive loads from voltage problems in the grid by injecting voltage. The DVR and D-STATCOM were used to improve voltage stability in faults. A standard 13-bus system was studied in the presence of a wind farm. The simulation results demonstrated that single and three-phase overloads dramatically altered the voltage of the system, making it necessary to use compensators to improve voltage stability. The DVR and D-STATCOM showed similar performance under normal conditions and somewhat improved grid voltage unbalance. However, the DVR outperformed D-STATCOM under asymmetric faults conditions and led to lower voltage variations.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Power System Optimization and Stability · Microgrid Control and Optimization · Power Quality and Harmonics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Dynamic voltage restorer (DVR) for voltage sag mitigation10.15676/ijeei.2011.3.1.1 ↗
2. Voltage balancing and synchronization of microgrids with highly unbalanced loads10.1016/j.rser.2013.12.045 ↗
3. Optimal IPFC signal selection and damping controller design using a novel current injection model in a multi-machine power system10.1016/j.ijepes.2012.07.071 ↗
4. Short-term wind power prediction based on spatial model10.1016/j.renene.2016.09.069 ↗
5. Improving fault ride-through capability of wind generation system using DVR10.1016/j.ijepes.2012.10.040 ↗
6. Adaptive PI control of dynamic voltage restorer using fuzzy logic
7. Optimal designing of fuzzy-PID controller in the load-frequency control loop of hydro-thermal power system connected to wind farm by HVDC lines10.1109/ACCESS.2022.3183155 ↗
8. Optimal location of FACTS devices in order to simultaneously improving transmission losses and stability margin using artificial bee colony algorithm10.1109/ACCESS.2021.3108687 ↗
9. Design a new fast-converged estimation approach for dynamic voltage restorer (DVR) to compensate voltage sags in waveform distortion conditions10.1016/j.ijepes.2013.08.012 ↗
10. N. Saudin, “Voltage sags mitigation techniques analysis,” Ph.D. Dissertation, Universiti Teknologi Malaysia, Malaysia, 2007.
11. Dynamic voltage restorer application for power quality improvement in electrical distribution system: An overview
12. Autonomous appliance scheduling for household energy management10.1109/TSG.2013.2271427 ↗
13. Uncertainty-aware household appliance scheduling considering dynamic electricity pricing in smart home10.1109/TSG.2012.2226065 ↗
14. Fuzzy-based controller for DVR in the presence of DG10.1016/j.procs.2017.11.296 ↗
15. Optimal location for series FACTS devices to transient stability constrained congestion management
16. Energy-efficient buildings facilitated by microgrid10.1109/TSG.2010.2083705 ↗
17. A review on the economic dispatch and risk management considering wind power in the power market10.1016/j.rser.2009.01.013 ↗
18. Definition and classification of power system stability IEEE/CIGRE joint task force on stability terms and definitions10.1109/TPWRS.2004.825981 ↗
19. Investigation of a voltage collapse incident in Sri Lankan power system network
20. Multi-objective PID controller tuning for a FACTS-based damping stabilizer using non-dominated sorting genetic algorithm-II10.1016/j.ijepes.2011.06.002 ↗
21. A novel adaptive fuzzy membership function tuning algorithm for robust control of a PV-based dynamic voltage restorer (DVR)10.1016/j.engappai.2016.04.007 ↗
22. Power quality improvement using STS and DVR in wind energy system10.1016/j.renene.2017.01.013 ↗
23. Power-frequency oscillation suppression algorithm for AC microgrid with multiple virtual synchronous generators based on fuzzy inference system10.1049/rpg2.12461 ↗
24. Research on electric vehicle charging safety warning model based on back propagation neural network optimized by improved gray wolf algorithm10.1016/j.est.2022.104092 ↗
25. The multi-class fault diagnosis of wind turbine bearing based on multi-source signal fusion and deep learning generative model
26. Efficient smart grid load balancing via fog and cloud computing
27. Optimal performance of hybrid energy system in the presence of electrical and heat storage systems under uncertainties using stochastic p-robust optimization technique10.1016/j.scs.2022.103935 ↗
28. Computational analysis of variational inequalities using mean extra-gradient approach10.3390/math10132318 ↗
29. DeepBAN: A temporal convolution-based communication framework for dynamic WBANs10.1109/TCOMM.2021.3094581 ↗
30. Spatiotemporal characteristics and attribution of dry/wet conditions in the Weihe river basin within a typical monsoon transition zone of east Asia over the recent 547 years10.1016/j.envsoft.2021.105116 ↗
31. Wideband RCS reduction of microstrip antenna array using coding metasurface with low Q resonators and fast optimization method10.1109/LAWP.2021.3138241 ↗
32. Highly selective frequency selective surface with ultrawideband rejection10.1109/TAP.2021.3137453 ↗
33. 60-GHz Third-order on-chip bandpass filter using GaAs pHEMT technology10.1088/1361-6641/ac5bf8 ↗
34. Radar sensor network resource allocation for fused target tracking: A brief review10.1016/j.inffus.2022.06.009 ↗
35. 220 GHz multi circuit integrated front end based on solid-state circuits for high speed communication system10.1049/cje.2021.00.295 ↗
36. Investigation of transient magnetoelectric response of magnetostrictive/piezoelectric composite applicable for lightning current sensing10.1016/j.sna.2021.112789 ↗
37. Lu · Measurement · 2021 · 168 · 10840910.1016/j.measurement.2020.108409 ↗
38. Direct modulation pattern control for dual three-phase PMSM drive system10.1109/TIE.2021.3053880 ↗
39. Candidate modulation patterns solution for five-phase PMSM drive system10.1109/TTE.2021.3104876 ↗
40. Split-core magnetoelectric current sensor and wireless current measurement application10.1016/j.measurement.2021.110527 ↗
41. A computational framework for fluid–structure interaction with applications on stability evaluation of breakwater under combined tsunami–earthquake activity
42. Seismic performance analysis of a wind turbine with a monopile foundation affected by sea ice based on a simple numerical method10.1080/19942060.2021.1939790 ↗
43. DC-Side synchronous active power control of two-stage photovoltaic generation for frequency support in islanded microgrids10.1016/j.egyr.2022.06.030 ↗
44. Fast grid frequency and voltage control of battery energy storage system based on the amplitude-phase-locked-loop10.1109/TSG.2021.3133580 ↗
45. Hierarchical multi-objective optimal planning model of active distribution network considering distributed generation and demand-side response10.1016/j.seta.2022.102438 ↗
46. Policy analysis for grid parity of wind power generation in China10.1016/j.enpol.2019.111225 ↗
47. Probabilistic energy flow calculation for regional integrated energy system considering cross-system failures10.1016/j.apenergy.2021.118326 ↗
48. Planning-oriented resilience assessment and enhancement of integrated electricity-gas system considering multi-type natural disasters10.1016/j.apenergy.2022.118824 ↗
49. GRASS: Generative recursive autoencoders for shape structures