journal article·2022Open access

Performance Enhancement of Praseodymium Doped Fiber Amplifiers

Abdullah G. Alharbi, Jawad Mirza, Mehak Raza, Salman Ghafoor

Computers, Materials & Continua· Volume 73· Issue 3

Abstract

In this paper, we report a simulation study on the performance enhancement of Praseodymium doped silica fiber amplifiers (PDFAs) in O-band (1270–1350 nm) in terms of small signal gain, power conversion efficiency (PCE), and output optical power by employing bidirectional pumping. The PDFA performance is examined by optimizing the length of Praseodymium doped silica fiber (PDF), its mode-field diameter (MFD) and the concentration of Pr3+. A small-signal peak gain of 56.4 dB, power conversion efficiency (PCE) of 47%, and output optical power of around 1.6 W (32 dBm) is observed at optimized parameters for input signal wavelength of 1310 nm. Minimum noise figure (NF) of 4.1 dB is observed at input signal wavelength of 1310 nm. Moreover, the effect of varying the pump wavelength and pump power on output optical power of the amplifier and amplified spontaneous emission (ASE) noise is also investigated, respectively. Finally, the impact of ion-ion interaction (up-conversion effect) on small-signal gain of the amplifier is also studied by considering different values of up-conversion coefficient.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Optical Network Technologies · Semiconductor Lasers and Optical Devices · Photonic Crystal and Fiber Optics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. A high bit rate free space optics based ring topology having carrier-less nodes10.1049/cmu2.12174 ↗
2. Design and analysis of a 32 × 5 Gbps passive optical network employing FSO based protection at the distribution level10.1016/j.aej.2020.08.020 ↗
3. Performance evaluation of Praseodymium doped fiber amplifiers10.1007/s10043-021-00706-z ↗
4. Optical amplification at 1.3 μm in a praseodymium-doped sulfide-glass fiber10.1111/j.1151-2916.2000.tb01276.x ↗
5. Enhanced erbium-zirconia–yttria-aluminum co-doped fiber amplifier10.1109/JPHOT.2015.2477899 ↗
6. Double-seeding of Er/Yb co-doped fiber amplifiers for controlling of Yb-ASE10.1109/JLT.2013.2282634 ↗
7. ThorLabs, “O-band booster optical amplifiers (BOAs), https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=3990.
8. Praseodymium doped fiber amplifiers, https://www.fiberlabs.com/glossary/praseodymium-doped-fiber-amplifier/.
9. Numerical simulation of ultrashort mid-IR pulse amplification in Praseodymium doped chalcogenide fibers10.1109/JLT.2017.2775864 ↗
10. Design and numerical modeling of broadband mid-IR rare-earth-doped chalcogenide fiber amplifiers10.1109/LPT.2018.2839031 ↗
11. Hu · Optics Letters · 2015 · 40 · 368710.1364/OL.40.003687 ↗
12. Pr3+-doped midinfrared chalcogenide fiber amplifiers using cascaded amplification
13. Khamis · IEEE Photonics Technology Letters · 2018 · 30 · 82510.1109/LPT.2018.2818333 ↗
14. Polarization dependent gain in Pr3+/Yb3+ doped fluoride fibre
15. Shen · Optics Express · 2018 · 26 · 2364110.1364/OE.26.023641 ↗
16. Noise figure and gain temperature dependent of Praseodymium-doped fiber amplifier by using rate equations10.1016/j.optcom.2009.10.005 ↗
17. Praseodymium ion doped Phosphate glasses for integrated broadband ion-exchanged waveguide amplifier10.1016/j.jallcom.2014.11.033 ↗
18. Ultra-broadband near-infrared emission in Praseodymium ion doped Germanium-Tellurite glasses for optical fiber amplifier operating at E-, S-, C-, and L-band10.1063/1.4722997 ↗
19. Characterisation and modelling of Praseodymium doped fibre amplifiers
20. Experimental performance of semiconductor optical amplifiers and Praseodymium doped fiber amplifiers in 1310-nm dense wavelength division multiplexing system10.1117/1.OE.56.4.046101 ↗
21. Experimental and numerical study of emission properties of Pr3+ doped Ga (In)-Ge-As-Se Glass fibers
22. Development of an efficient Praseodymium doped fiber amplifier10.1109/3.704316 ↗
23. Concentration effect on gain of Pr3+-doped Fluoride fiber for 1.3 μm amplification10.1109/68.180569 ↗
24. Valles · Journal of Modern Optics · 1998 · 45 · 255110.1080/09500349808230507 ↗
25. High output-power Praseodymium doped fiber amplifier singlepumped at 1030 nm: Analysis and results10.1109/2944.649550 ↗
26. Sek · Journal of Lightwave Technology · 1998 · 16 · 35810.1109/50.661361 ↗
27. A review of recent system demonstrations incorporating 1.3 μm Praseodymium doped Fluoride fiber amplifiers10.1109/50.387792 ↗
28. Optiwave, “OptiSystem overview, [Online]. Available: https://optiwave.com/optisystem-overview/.
29. Modelling consideration of Praseodymium-doped fiber amplifiers for 1.3 μm wavelength applications10.1016/j.optcom.2006.07.054 ↗
30. Performance evaluation of Er3+/Yb3+ co-doped fiber amplifier10.1002/mop.32320 ↗
31. Gain characteristics of Erbium doped fiber amplifier
32. Investigation of clustering effects on Erbium-doped fiber laser performance10.3788/COL201715.010601 ↗
33. Effective mode field diameter for LP11 mode and its measurement technique10.1109/LPT.2016.2605639 ↗
34. Effects of concentration on the performance of Erbium-doped fiber amplifiers10.1109/50.552118 ↗