Influence of the cavities on the PCB mechanical properties

Purpose – The main aim of this paper is to investigate the influence of the cavity coverage on the printed circuit boards (PCB) to the resonant frequency, acceleration and displacement. Design/methodology/approach – Tests were realized on four PCBs with different cavity areas. Frequency range of tests was between 10 and 2,000 Hz with 0.3 g acceleration amplitude. In addition, more simulations were performed to check different setups of the boards. Findings – From the calculated and measured data, it is clear that with the larger cavity area the resonance frequency drops. In case a greater number of components placed in cavities are needed on board, it is appropriate to use multiple smaller cavities than the bigger ones. Originality/value – Results in this paper could be very useful for PCB manufacturers and designers during designing of the new PCBs with cavities for dipped components.