Enhancing the effective thermal conductivity for CO 2 adsorption by building zeolite composites with carbon
Source abstract
Abstract
Abstract Improving the thermal conductivity of zeolite adsorbents is essential for enhancing the efficiency of thermal swing adsorption (TSA) processes in CO 2 capture. In this work, zeolite Y was combined with two types of carbon-based thermal conductive enhancers, expanded natural graphite (ENG) and graphene nanosheets (GRA), to form zeolite–carbon composites. Structural analysis confirmed that the incorporation of carbon additives did not damage the zeolite framework, although the addition of non-porous carbon led to a decrease in surface area and micropore volume. Measurements with a transient hot disk method revealed that the incorporation of ENG and GRA could remarkably enhance the thermal conductivity of zeolite Y-carbon composites. A 7-fold increase in thermal conductivity, from 0.107 to 0.762 Wm −1 K −1 , was achieved by adding 5wt.% of GRA, whereas a comparable improvement with ENG required a much higher loading of about 30 wt.%. Infrared thermography on packed composite powder on a heated plate indicated that the heat transfer through the composites with improved thermal conductivity is significantly faster compared to plain zeolite. CO 2 adsorption measurements indicated that both additives reduced the CO 2 uptake capacity, but the loss was significantly smaller for the graphene composites (at 5 wt.% addition), which retained most of the micropore volume. Ideal adsorbed solution theory calculations further showed that the zeolite Y-GRA composites maintained reasonably high CO 2 /N 2 selectivity, though lower than pristine zeolite Y. In conclusion, the zeolite–graphene composites present a promising pathway to improve the intrinsic thermal limitations of zeolite sorbents, enabling faster heating and cooling cycles and improved productivity in TSA-based carbon capture systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Carbon Dioxide Capture Technologies · Adsorption and Cooling Systems · Chemical Looping and Thermochemical Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Climate change 2023: synthesis report. contribution of working groups I, II and III to the sixth assessment report of the intergovernmental panel on climate change
2. The role of CO2 capture and utilization in mitigating climate change10.1038/nclimate3231 ↗
3. Adsorption of carbon dioxide for post-combustion capture: a review10.1021/acs.energyfuels.1c01618 ↗
4. Amine scrubbing for CO2 capture10.1126/science.1176731 ↗
5. A critical review on potential applications of metal-organic frameworks (MOFs) in adsorptive carbon capture technologies10.1016/j.applthermaleng.2023.121504 ↗
6. Emerging technologies in post-combustion carbon dioxide capture & removal10.1016/j.cattod.2023.114286 ↗
7. Porous materials for carbon dioxide separations10.1038/s41563-021-01054-8 ↗
8. Zeolites as selective adsorbents for CO2 separation10.1021/acsaem.2c03605 ↗
9. Temperature swing adsorption for the recovery of the heavy component: an equilibrium-based shortcut model10.1021/ie5048829 ↗
10. Effect of relative humidity on thermal conductivity of zeolite-based adsorbents: theory and experiments10.1016/j.applthermaleng.2018.12.144 ↗
11. Enhanced thermal conductivity and adsorption rate of zeolite 13X adsorbent by compression-induced molding method for sorption thermal battery10.1016/j.energy.2021.122797 ↗
12. Temperature-dependent thermal conductivity of powdered zeolite NaX10.1016/j.micromeso.2007.01.040 ↗
13. High thermally conductive shape-stabilized phase change composites with dual-aligned carbon nanofiber scaffolds10.1016/j.est.2024.110739 ↗
14. MOF-5 composites exhibiting improved thermal conductivity10.1016/j.ijhydene.2011.12.129 ↗
15. Superior thermal transport properties of vertically aligned carbon nanotubes tailored through mesoscale architectures10.1016/j.carbon.2023.118526 ↗
16. Experimental study on thermal conductivity of paraffin-based shape-stabilized phase change material with hybrid carbon nano-additives10.1016/j.renene.2019.08.098 ↗
17. Dimensional crossover of thermal transport in few-layer graphene10.1038/nmat2753 ↗
18. Improved hydrogen storage and thermal conductivity in high-density MOF-5 composite10.1021/jp305524f ↗
19. Thermal conductivity enhancement of epoxy adhesive using graphene sheets as additives10.1016/j.ijthermalsci.2014.07.011 ↗
20. Structuring zeolite bodies for enhanced heat-transfer properties10.1016/j.micromeso.2015.01.028 ↗
21. Shahzad · 201810.5772/intechopen.72471 ↗
22. Thermal properties of graphene and nanostructured carbon materials10.1038/nmat3064 ↗
23. Adsorption of CO2, CH4 and H2 onto zeolite 13X: kinetic and equilibrium studies10.1016/j.heliyon.2024.e40672 ↗
24. Thermal conductivity of a metal-organic framework (MOF-5): part II10.1016/j.ijheatmasstransfer.2006.10.001 ↗
25. Activated carbon and graphene nanoplatelets based novel composite for performance enhancement of adsorption cooling cycle10.1016/j.enconman.2018.10.092 ↗
26. 3D evaluation of porous zeolite absorbents using FIB-SEM tomography10.1007/s40684-018-0019-4 ↗
27. Heat transfer intensification with packed open-cell foams in TSA processes for CO2 capture10.1016/j.cej.2021.131000 ↗
28. Sustainable production of graphene from solar-driven expanded graphite10.1002/aesr.202400274 ↗
29. Impact of graphitization degree on the electrochemical and thermal properties of coal10.1021/acsomega.3c06871 ↗
30. Shaped zeolites Y for polypropylene cracking10.1016/j.apcatb.2024.124893 ↗
31. In situ XAFS, XRD, and DFT characterization of the sulfur adsorption sites on Cu and Ce exchanged Y zeolites10.1021/acs.jpcc.1c09128 ↗
32. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC technical report)10.1515/pac-2014-1117 ↗
33. Effect of humidity on the thermal conductivity of porous zirconia ceramics10.1016/j.jeurceramsoc.2013.03.029 ↗
34. Effect of water vapor on the thermal resistance between amorphous silica nanoparticles10.1063/1.5038117 ↗
35. Effect of moisture on nanoparticle packed beds10.1016/j.ijheatmasstransfer.2017.04.073 ↗
36. Effects of humidity on thermal performance of aerogel insulation blankets10.1016/j.jobe.2017.07.001 ↗
37. Estimation of temperature-dependent thermal conductivity of a packed bed of 13.mu.e molecular sieves10.1021/ie00038a047 ↗
38. Colloquium: phononic thermal properties of two-dimensional materials10.1103/RevModPhys.90.041002 ↗
39. Graphene and graphene oxide: synthesis, properties, and applications10.1002/adma.201001068 ↗
40. Adsorption and reactivity of CO2 on defective graphene sheets10.1021/jp807087y ↗
41. Nitrogen doping and CO2 adsorption on graphene: a thermodynamical study10.1103/PhysRevB.97.155428 ↗
42. Impact of surface functional groups and their introduction methods on the mechanisms of CO2 adsorption on porous carbonaceous adsorbents10.1016/j.ccst.2022.100045 ↗
43. Thermodynamics of adsorption in porous materials10.1002/aic.690480115 ↗
44. Direct modification of pelletized 13X zeolite by atomic layer deposition toward effective CO2 capture from flue gas10.1016/j.cej.2024.154733 ↗
45. Strong and binder free structured zeolite sorbents with very high CO2-over-N2 selectivities and high capacities to adsorb CO2 rapidly10.1039/c2ee21153j ↗
46. Adsorption equilibria of CO2 on zeolite 13X and zeolite X/activated carbon composite10.1021/je020050e ↗