journal article·2023-10-01Open access

Design of n-i-p and p-i-n Sb2Se3 solar cells: role of band alignment

Marwa S Salem, Mohamed Okil, Ahmed Shaker, Abdullah Albaker, Mansoor Alturki

Journal of Physics: Energy· Volume 5· Issue 4

Abstract

Abstract Investigations into novel device architectures and interfaces that enhance charge transport and collection are necessary to increase the power conversion efficiency (PCE) of antimony selenide (Sb2Se3) solar cells, which have shown great promise as a low-cost and high-efficiency alternative to conventional silicon-based solar cells. The current work uses device simulations to design p-i-n and n-i-p Sb2Se3-based solar cell structures. The n-i-p configuration is investigated by comparing distinct electron transport layer (ETL) materials to get the best performance. While certain ETL materials may yield higher efficiencies, the J–V curve may exhibit S-shaped behavior if there is a misalignment of the bands at the ETL/absorber interface. To address this issue, a proposed double ETL structure is introduced to achieve proper band alignment and conduction band offset for electron transport. A PCE of 20.15% was achieved utilizing (ZnO/ZnSe) as a double ETL and Spiro-OMeTAD as a hole transport layer (HTL). Further, the p-i-n configuration is designed by proposing a double HTL structure to facilitate hole transport and achieve a proper valence band offset. A double HTL consisting of (CuI/CuSCN) is used in conjunction with ETL-free configuration to achieve a PCE of 21.72%. The simulation study is conducted using the SCAPS-1D device simulator and is validated versus a previously fabricated cell based on the configuration FTO/CdS/Sb2Se3/Spiro-OMeTAD/Au.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. The importance of renewable energy sources for sustainable development10.5937/ESD2002016P ↗
2. Solar cell efficiency tables (Version 61)10.1002/pip.3646 ↗
3. Silicon nanowire radial p-n junction solar cells10.1021/ja8032907 ↗
4. Si microwire-array solar cells10.1039/c0ee00014k ↗
5. Physically based analytical model of heavily doped silicon wafers based proposed solar cell microstructure10.1109/ACCESS.2020.3012657 ↗
6. Possible top cells for next-generation Si-based tandem solar cells10.1007/s12200-020-1050-y ↗
7. A review of thin film solar cell technologies and challenges10.1016/j.rser.2016.12.028 ↗
8. Experimental performance characterization of photovoltaic modules using DAQ10.1016/j.egypro.2013.07.037 ↗
9. Antimony selenide thin-film solar cells10.1088/0268-1242/31/6/063001 ↗
10. Optical properties of amorphous and polycrystalline Sb2Se3 thin films prepared by thermal evaporation10.1063/1.4927741 ↗
11. Interface engineering via sputtered oxygenated CdS:O window layer for highly efficient Sb2Se3 thin-film solar cells with efficiency above 7%10.1002/solr.201900225 ↗
12. Ultrafast broadband nonlinear optical response in Co-doped Sb2Se3 nanofilms at near-infrared10.3389/fmats.2021.721101 ↗
13. Selenization of Sb2Se3 absorber layer: an efficient step to improve device performance of CdS/Sb2Se3 solar cells10.1063/1.4894170 ↗
14. Improving the performance of Sb2Se3 thin film solar cells over 4% by controlled addition of oxygen during film deposition10.1002/pip.2627 ↗
15. A review of Sb2Se3 photovoltaic absorber materials and thin-film solar cells10.1016/j.solener.2020.03.009 ↗
16. Regulating deposition kinetics via a novel additive-assisted chemical bath deposition technology enables fabrication of 10.57%-efficiency Sb2Se3 solar cells10.1039/D2EE02261C ↗
17. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells10.1038/s41467-018-07903-6 ↗
18. 6.5% certified efficiency Sb2Se3 solar cells using PbS colloidal quantum dot film as hole-transporting layer10.1021/acsenergylett.7b00648 ↗
19. Direct hydrothermal deposition of antimony triselenide films for efficient planar heterojunction solar cells10.1021/acsami.1c02393 ↗
20. Improvement in Sb2Se3 solar cell efficiency through band alignment engineering at the buffer/absorber interface10.1021/acsami.8b17611 ↗
21. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
22. Tellurium doping inducing defect passivation for highly effective antimony selenide thin film solar cell10.3390/nano13071240 ↗
23. Sb2 (S1−xSex 3 solar cells: the impact of radiative and non-radiative loss mechanisms10.1088/1361-6463/aaddea ↗
24. Analysis of Sb2Se3/CdS based photovoltaic cell: a numerical simulation approach10.1016/j.jpcs.2018.05.045 ↗
25. Towards high efficiency inverted Sb2Se3 thin film solar cells10.1016/j.solmat.2019.109945 ↗
26. Numerical analysis of a novel CNT/Cu2O/Sb2Se3/In2S3/ITO antimony selenide solar cell10.1016/j.ijleo.2019.163107 ↗
27. Towards high efficiency Cd-Free Sb2Se3 solar cells by the band alignment optimization10.1016/j.solmat.2020.110581 ↗
28. Numerical modelling and analysis of earth abundant Sb2S3 and Sb2Se3 based solar cells using SCAPS-1D10.1016/j.solmat.2021.111184 ↗
29. One Dimensional Solar Cell Simulation Program; SCAPS 3.3.10 Manual
30. Analysis of hybrid hetero-homo junction lead-free perovskite solar cells by scaps simulator10.3390/en14185741 ↗
31. Numerical study of organic graded bulk heterojunction solar cell using SCAPS simulation10.1016/j.solener.2020.09.068 ↗
32. Numerical analysis of hole transport layer-free antimony selenide solar cells: possible routes for efficiency promotion10.1016/j.optmat.2022.112473 ↗
33. Prospective efficiency boosting of full-inorganic single-junction Sb2(S, Se)3 solar cell10.1016/j.solmat.2022.112001 ↗
34. Numerical analysis and design of high performance HTL-free antimony sulfide solar cells by SCAPS-1D10.1016/j.optmat.2021.111880 ↗
35. Electrical barriers and their elimination by tuning (Zn,Mg)O buffer composition in Cu(In,Ga)S2 solar cells: systematic approach to achieve over 14% power conversion efficiency10.1088/2515-7655/ac8838 ↗
36. Possible efficiency boosting of non-fullerene acceptor solar cell using device simulation10.1016/j.optmat.2019.03.023 ↗
37. Study of loss mechanisms on Sb2(S1−xSex 3 solar cell with n–i–p structure: toward an efficiency promotion10.1063/5.0032867 ↗
38. Enhanced efficiency and stability in Sb2S3 seed layer buffered Sb2Se3 solar cells10.1002/admi.202200547 ↗
39. Pinhole-free and surface-nanostructured NiOx film by room-temperature solution process for high-performance flexible perovskite solar cells with good stability and reproducibility10.1021/acsnano.5b07043 ↗
40. Identifying fundamental limitations in halide perovskite solar cells10.1002/adma.201505480 ↗
41. Theoretical analysis on effect of band offsets in perovskite solar cells10.1016/j.solmat.2014.10.036 ↗
42. Design and analysis of Sb2S3/Si thin film tandem solar cell10.1016/j.solmat.2023.112210 ↗
43. The band structures of Zn1−xMgxO(In) and the simulation of CdTe solar cells with a Zn1−xMgxO(In) window layer by SCAPS10.3390/en12020291 ↗
44. Enhancement of efficiency of (FA)2BiCuI6 based perovskite solar cells with inorganic transport layers10.1016/j.optmat.2021.111671 ↗
45. Effect of various electron and hole transport layers on the performance of CsPbI3-based perovskite solar cells: a numerical investigation in DFT, SCAPS-1D, and wxAMPS frameworks10.1021/acsomega.2c05912 ↗
46. Evaluation of new materials for electron and hole transport layers in perovskite-based solar cells through SCAPS-1D10.1109/PVSC.2016.7749702 ↗
47. Efficient design of perovskite solar cell using mixed halide and copper oxide10.1088/1674-1056/27/1/018801 ↗