Electrochemical characterization of hexamethylguanidinium bis(fluorosulfonyl)imide [HMG][FSI] based electrolyte and its application in sodium metal batteries
Source abstract
Abstract
Abstract With the increasing energy demand for both electronic portable devices and energy storage for fluctuating renewable energy sources, there is a strong need for alternatives beyond lithium batteries. Sodium batteries have been attracting great attention recently due to the abundance and low supply cost of the raw materials. However, they require highly conductive, safe and electrochemically stable electrolytes in order to enable their practical realization. In this work we present the promising physicochemical properties of the electrolyte based on hexamethylguanidinium bis(fluorosulfonyl)imide [FSI] at a sodium concentration of 25 mol% NaFSI. The liquid-state electrolyte supports stable Na plating and stripping at 1 h polarization times at 0.5 mA cm−2 current density in a Na symmetrical coin cell at 50 °C, maintaining a low polarization potential of ≈45 mV throughout 160 cycles. Moreover, this electrolyte is characterized by relatively high Na-ion transference number of 0.36 ± 0.03 at 50 °C. A long cycle life of 300 cycles with 285 mAh g−1 is achieved in a half cell set up with hard carbon. The solid-electrolyte interphase layer on the anode, which contributes to this high capacity, is investigated by x-ray photoelectron spectroscopy and solid-state nuclear magnetic resonance spectroscopy. The long-term cycling performance of Na|NaFePO4 cell is also demonstrated with a high specific capacity of 106 mAh g−1 and 80% capacity retention after 110 cycles.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Inorganic Chemistry and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Soda Ash
2. Lithium
3. Recent progress in the development and use of organic ionic plastic crystal electrolytes10.1039/C2CP43267F ↗
4. Ionic liquids and their solid-state analogues as materials for energy generation and storage10.1038/natrevmats.2015.5 ↗
5. Organic ionic plastic crystals as solid-state electrolytes10.1016/j.trechm.2019.01.002 ↗
6. On the use of organic ionic plastic crystals in all solid-state lithium metal batteries10.1016/j.ssi.2011.09.012 ↗
7. Ionic liquids and organic ionic plastic crystals: advanced electrolytes for safer high performance sodium energy storage technologies10.1002/aenm.201703491 ↗
8. The unseen evidence of reduced ionicity: the elephant in (the) room temperature ionic liquids10.1016/j.molliq.2020.115069 ↗
9. A safe and high-rate negative electrode for sodium-ion batteries: hard carbon in NaFSA-C1C3pyrFSA ionic liquid at 363 K10.1016/j.jpowsour.2013.07.112 ↗
10. Electrochemical performance of hard carbon negative electrodes for ionic liquid-based sodium ion batteries over a wide temperature range10.1016/j.electacta.2015.07.024 ↗
11. CuP2/C composite negative electrodes for sodium secondary batteries operating at room-to-intermediate temperatures utilizing ionic liquid electrolyte10.1002/celc.201800206 ↗
12. Electrochemical performance of Na2Ti3O7/C negative electrode in ionic liquid electrolyte for sodium secondary batteries10.1016/j.jpowsour.2017.04.027 ↗
13. Na-Ion solvation and high transference number in superconcentrated ionic liquid electrolytes: a theoretical approach10.1021/acs.jpcc.7b09322 ↗
14. Novel Na+Ion diffusion mechanism in mixed organic-inorganic ionic liquid electrolyte leading to high Na+Transference number and stable, high rate electrochemical cycling of sodium cells10.1021/acs.jpcc.5b11746 ↗
15. Anion-derived solid-electrolyte interphase enables long life Na-Ion batteries using superconcentrated ionic liquid electrolytes10.1021/acsenergylett.1c00816 ↗
16. High capacity hard carbon anodes for sodium ion batteries in additive free electrolyte10.1016/j.elecom.2012.10.038 ↗
17. High-capacity FeTiO3/C negative electrode for sodium-ion batteries with ultralong cycle life10.1016/j.jpowsour.2018.03.068 ↗
18. Silicon-based anodes with long cycle life for lithium-ion batteries achieved by significant suppression of their volume expansion in ionic-liquid electrolyte10.1021/acsami.8b17123 ↗
19. Tuning of Na+ Concentration in an ionic liquid electrolyte to optimize solid-electrolyte interphase at microplasma-synthesized graphene anode for Na-Ion batteries10.1021/acssuschemeng.9b04091 ↗
20. Biomass hard carbon of high initial coulombic efficiency for sodium-ion batteries: preparation and application10.1016/j.electacta.2022.140017 ↗
21. Recent advances in hard carbon anodes with high initial coulombic efficiency for sodium-ion batteries10.1016/j.nanoms.2022.02.001 ↗
22. NaFSA-C1C3pyrFSA ionic liquids for sodium secondary battery operating over a wide temperature range10.1016/j.jpowsour.2013.03.089 ↗
23. Na[FSA]-[C3C1pyrr][FSA] ionic liquids as electrolytes for sodium secondary batteries: effects of Na ion concentration and operation temperature10.1016/j.jpowsour.2014.06.033 ↗
24. Electrochemical and structural investigation of NaCrO2 as a positive electrode for sodium secondary battery using inorganic ionic liquid NaFSA-KFSA10.1016/j.jpowsour.2013.03.006 ↗
25. Small quaternary alkyl phosphonium bis(fluorosulfonyl)imide ionic liquid electrolytes for sodium-ion batteries with P2- and O3-Na2/3[Fe2/3Mn1/3]O2 cathode material10.1016/j.jpowsour.2017.03.013 ↗
26. Stable cycling of NaFePO4 cathodes in high salt concentration ionic liquid electrolytes10.1016/j.jpowsour.2018.09.102 ↗
27. Phosphonium plastic crystal salt alloyed with a sodium salt as a solid-state electrolyte for sodium devices: phase behaviour and electrochemical performance10.1039/C6TA10340E ↗
28. Comparison of the physicochemical and electrochemical behaviour of mixed anion phosphonium based OIPCs electrolytes for sodium batteries10.1016/j.ssi.2017.10.014 ↗
29. Mixed phase solid-state plastic crystal electrolytes based on a phosphonium cation for sodium devices10.1002/aenm.201601272 ↗
30. The effect of cation chemistry on physicochemical behaviour of superconcentrated NaFSI based ionic liquid electrolytes and the implications for Na battery performance10.1016/j.electacta.2018.02.052 ↗
31. Stable high-temperature cycling of Na metal batteries on Na3V2(PO4)3 and Na2FeP2O7 cathodes in NaFSI-rich organic ionic plastic crystal electrolytes10.1021/acs.jpclett.0c00149 ↗
32. Investigation of unusual conductivity behavior and ion dynamics in hexamethylguanidinium bis(fluorosulfonyl)imide-based electrolytes for sodium batteries10.1021/acs.jpcc.1c01777 ↗
33. Exploration of phase diagram, structural and dynamic behavior of [HMG][FSI] mixtures with NaFSI across an extended composition range10.1039/d2cp01910h ↗
34. Development of new solid-state electrolytes based on a hexamethylguanidinium plastic crystal and lithium salts10.1016/j.electacta.2020.136863 ↗
35. Organic salts utilising the hexamethylguanidinium cation: the influence of the anion on the structural, physical and thermal properties10.1039/C9CP01740B ↗
36. Study of the Li-insertion/extraction process in LiFePO4/FePO410.1016/j.jpowsour.2008.11.042 ↗
37. Cost-effective synthesis of Triphylite-NaFePO4 cathode: a zero-waste process10.1021/acssuschemeng.9b05736 ↗
38. Electrochemical measuremnet of transference numbers in polymer electrolytes10.1016/0032-3861(87)90394-6 ↗
39. Physicochemical properties of N-propyl-N-methylpyrrolidinium bis(fluorosulfonyl)imide for sodium metal battery applications10.1039/c4cp00365a ↗
40. Engineering high-energy-density sodium battery anodes for improved cycling with superconcentrated ionic-liquid electrolytes10.1038/s41563-020-0673-0 ↗
41. Lithium doped N,N-dimethyl pyrrolidinium tetrafluoroborate organic ionic plastic crystal electrolytes for solid state lithium batteries10.1039/c0jm04401f ↗
42. On the comparative stability of Li and Na metal anode interfaces in conventional alkyl carbonate electrolytes10.1149/2.0091513jes ↗
43. High-performance cycling of na metal anodes in phosphonium and pyrrolidinium fluoro(sulfonyl)imide based ionic liquid electrolytes10.1021/acsami.1c24812 ↗
44. Optimising organic ionic plastic crystal electrolyte for all solid-state and higher than ambient temperature lithium batteries10.1007/s10008-011-1566-6 ↗
45. An organic ionic plastic crystal electrolyte for rate capability and stability of ambient temperature lithium batteries10.1039/c4ee01085j ↗
46. Dendrites and pits: untangling the complex behavior of lithium metal anodes through operando video microscopy10.1021/acscentsci.6b00260 ↗
47. Water as an effective additive for high-energy-density Na metal batteries? studies in a superconcentrated ionic liquid electrolyte10.1002/cssc.201802988 ↗
48. Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes10.1039/c7ta00371d ↗
49. Highly conductive ionogel electrolytes based on N-ethyl-N-methylpyrrolidinium bis(fluorosulfonyl)imide FSI and NaFSI mixtures and their applications in sodium batteries10.1088/2515-7639/ac0800 ↗
50. Sodium-ion batteries: current understanding of the sodium storage mechanism in hard carbons optimising properties to speed commercialisation10.1595/205651322X16250408525547 ↗
51. New mechanistic insights on Na-Ion storage in nongraphitizable carbon10.1021/acs.nanolett.5b01969 ↗
52. Insights into the Na+ Storage mechanism of phosphorus-functionalized hard carbon as ultrahigh capacity anodes10.1002/aenm.201702781 ↗
53. A revised mechanistic model for sodium insertion in hard carbons10.1039/d0ee01363c ↗
54. Correlation between microstructure and Na storage behavior in hard carbon10.1002/aenm.201501588 ↗
55. A bifunctional fluorophosphate electrolyte for safer sodium-ion batteries10.1016/j.isci.2018.11.020 ↗
56. Sustainable free‐standing electrode from biomass waste for sodium‐ion batteries10.1002/celc.202200382 ↗
57. SEI formation on sodium metal electrodes in superconcentrated ionic liquid electrolytes and the effect of additive water10.1021/acsami.0c18119 ↗
58. Differentiating contributions to “ion transfer” barrier from interphasial resistance and Li+ desolvation at electrolyte/graphite interface10.1021/la1009994 ↗
59. The mechanism of NaFePO4 (de)sodiation determined by in situ x-ray diffraction10.1039/c4cp01089b ↗
60. Abnormal operando structural behavior of sodium battery material: influence of dynamic on phase diagram of NaxFePO410.1016/j.elecom.2013.11.017 ↗
61. Crystal chemistry of Na insertion/deinsertion in FePO4- NaFePO410.1039/c2jm33639a ↗
62. Hard carbons for sodium-ion batteries and beyond10.1088/2516-1083/aba5f5 ↗
63. Insight into pre-sodiation in Na3V2(PO4)2F3/C @ hard carbon full cells for promoting the development of sodium-ion battery10.1016/j.cej.2020.127565 ↗
64. A type of sodium-ion full-cell with a layered NaNi0.5Ti0.5O2 cathode and a pre-sodiated hard carbon anode10.1039/c5ra21235a ↗
65. Ionic liquid electrolytes supporting high energy density in sodium-ion batteries based on sodium vanadium phosphate composites10.1039/c8cc00365c ↗