Tin-Substituted Chalcopyrite: Ann-Type Sulfide with Enhanced Thermoelectric Performance

The dearth of n-type sulfides with thermoelectric performance comparable to that of their p-type analogues presents a problem in the fabrication of all-sulfide devices. Chalcopyrite (CuFeS₂) offers a rare example of an n-type sulfide. Chemical substitution has been used to enhance the thermoelectric performance of chalcopyrite through preparation of Cu_1-x Sn _x FeS₂ (0 ≤ x ≤ 0.1). Substitution induces a high level of mass and strain field fluctuation, leading to lattice softening and enhanced point-defect scattering. Together with dislocations and twinning identified by transmission electron microscopy, this provides a mechanism for scattering phonons with a wide range of mean free paths. Substituted materials retain a large density-of-states effective mass and, hence, a high Seebeck coefficient. Combined with a high charge-carrier mobility and, thus, high electrical conductivity, a 3-fold improvement in power factor is achieved. Density functional theory (DFT) calculations reveal that substitution leads to the creation of small polarons, involving localized Fe²⁺ states, as confirmed by X-ray photoelectron spectroscopy. Small polaron formation limits the increase in carrier concentration to values that are lower than expected on electron-counting grounds. An improved power factor, coupled with substantial reductions (up to 40%) in lattice thermal conductivity, increases the maximum figure-of-merit by 300%, to zT ≈ 0.3 at 673 K for Cu_0.96Sn_0.04FeS₂.