Flame-Made Pt/Ceria/Zirconia for Low-Temperature Oxygen Exchange

The preparation of platinum (0−2 wt %) supported on ceria/zirconia (Ce 0.5 Zr 0.5 O 2 ) by flame synthesis resulted in materials with good thermal stability and improved dynamic oxygen exchange capacity at low temperatures. Comparison to a conventionally prepared material (precipitation and incipient wetness impregnation) showed an increased specific surface area for the flame-made catalysts after sintering at 1100 °C for 6 h in air. For low Pt content (0.1−0.5 wt %), the onset in low-temperature oxygen exchange activity of flame-made materials was even improved after a first redox test run. Repeated test runs up to 1100 °C deactivated the reference material for oxygen exchange below 300 °C, while the flame-made materials showed improved activity down to around 150 °C. Fluorescence EXAFS revealed the presence of oxidized Pt on the pre-sintered materials and confirmed the role of reduced Pt on the hydrogen activation prior to oxygen exchange. It further uncovered pronounced differences in Pt reducibility depending on the Pt loading.