Superparamagnetic Cobalt Ferrite Nanocrystals Synthesized by Alkalide Reduction

CoFe 2 O 4 nanocrystallites have been synthesized by alkalide reduction of Co 2+ and Fe 3+ to form nanoscale CoFe 2, followed by oxidation with aerated water at room-temperature resulting in the nanocrystalline ferrite. As produced, the material consists of 2−4 nm nanocrystals that are superparamagnetic with an average blocking temperature of ∼350 K. Annealing at 100 °C in air results in a decrease in the blocking temperature to ∼250 K, with no detectable nanocrystallite growth. The dramatic change in the magnetic properties upon annealing is probably due to removal of crystal defects, namely oxygen vacancies. Further annealing to temperatures as high as 400 °C results in little change in the nanocrystallite size or the magnetic properties. Annealing at 500 °C results in the onset of significant growth in the nanocrystallite size, reaching 30 nm for material annealed at 1000 °C. The saturation magnetization, remanence, and squareness ratio, measured at 300 K, increase smoothly with increasing annealing temperature above 500 °C reaching 30 nm, 75 emu/g (94% of bulk value), 28 emu/g, and 0.37 respectively, for material that had been annealed at 1000 °C. The unannealed material has the largest coercivity observed in this study, 5.13 kOe at 5 K falling to 116 Oe at 300 K. The coercivity at 300 K declines dramatically to 0.9 Oe upon annealing at 100 °C, rising sharply to 67 Oe for material annealed at 500 °C, falling to 44 Oe for material annealed at 600 °C, and then steadily growing with increasing annealing temperature to 59 Oe for material annealed at 1000 °C. The anomalous increase in coercivity observed for samples annealed at 500 °C appears to be due to an increase in the average crystallite aspect ratio, which declines upon annealing at higher temperature.